Fairfield Connecticut Building Expert Directory

No Coverage Under Ensuing Loss Provision

September 09, 2011 — Tred R. Eyerly - Insurance Law Hawaii

The cost of removing and replacing cracked flanges to prevent future leakage was not covered as an ensuing loss under a builder’s risk policy in RK Mechanical, Inc. v. Travelers Prop. Casualty Co. of Am., 2011 U.S. Dist. LEXIS 83958 (D. Colo. Aug. 1, 2011).

The insured, RK Mechanical Inc., was a subcontractor hired to install plumbing for a residential construction project. RK was an additional insured on the general contractor’s policy with Travelers. RK installed approximately 170 CPVC flanges on the project. Subsequently, two of the flanges cracked, allowing water to overflow and causing water damage to the project. Travelers was notified of the flange failure and resulting water damage.

RK subsequently removed and replaced the two cracked flanges and began water remediation. Travelers paid for the cost of the water damage due to the cracked flanges.

RK then examined all of the flanges installed in the project and discovered many were cracked and/or showed signs of potential failure. RK removed and replaced the cracked flanges. RK tendered a claim and demand for indemnity to Travelers for these repair costs. Travelers denied the claim. RK then sued for breach of contract and declaratory relief. The parties filed cross motions for summary judgment.

Read the full story…

Reprinted courtesy of Tred R. Eyerly, Insurance Law Hawaii. Mr. Eyerly can be contacted at te@hawaiilawyer.com

Read the court decision
Read the full story...
Reprinted courtesy of

Workarounds for Workers' Comp Immunity: How to Obtain Additional Insured Coverage when the Named Insured is Immune from Suit

May 25, 2020 — Bethany L. Barrese - Saxe Doernberger & Vita, P.C.
Construction is an inherently risky business, fraught with the potential for human error. Despite best efforts to ensure safety, accidents involving construction workers are common, with consequences ranging from your run-of-the-mill trip and fall to much more serious and debilitating injuries. A worker who is injured on the job generally receives workers’ compensation benefits through their employer. Most states have enacted statutes stating that this is the exclusive remedy available from the employer, effectively making employers immune against civil lawsuits that might otherwise be brought by their injured employees. However, workers’ compensation benefits do not always fully compensate the employee for their injuries. In the construction industry, this often leads to lawsuits against upstream parties, such as a general contractor or project owner. Read the court decision
Read the full story...
Reprinted courtesy of Bethany L. Barrese, Saxe Doernberger & Vita, P.C.
Ms. Barrese may be contacted at blb@sdvlaw.com

SE 2050 Is In Quixotic Pursuit of Eliminating Embodied Carbon in Building Structures

January 23, 2023 — Nadine M. Post - Engineering News-Record
Walking to work one November morning, structural engineer Chris Jeseritz was buoyed by a Nelson Mandela quotation on a digital sign on the side of a Seattle office tower: “A winner is a dreamer who never gives up.” Reprinted courtesy of Nadine M. Post - Engineering News-Record Ms. Post may be contacted at postn@enr.com Read the full story... Read the court decision
Read the full story...
Reprinted courtesy of

Flag on the Play! Expired Contractor’s License!

October 02, 2015 — Yas Omidi – California Construction Law Blog
It’s football season again. Which means, of course, that in addition to touch downs and field goals, you’ll also see hooting and hollering when the ref throws down a yellow flag signaling that a foul has been committed. In Judicial Council of California v. Jacob Facilities, Inc., Case Nos. A140890, A141393 (August 20, 2015), The California Court of Appeals for the First District threw down its own yellow flag under the dreaded Business and Professions Code section 7031, finding that a contractor was required to disgorge all monies received on a project – to the tune of a whopping $18 million – when its parent company allowed the subsidiary’s contractor’s license to lapse when it rebranded a new company to perform the work of the old company but never formally assigned the contract. I think someone in marketing may be in big trouble. Read the court decision
Read the full story...
Reprinted courtesy of Yasmeen, Omidi, Wendel Rosen Black & Dean LLP
Ms. Omidi may be contacted at yomidi@wendel.com

How to Make the Construction Dispute Resolution Process More Efficient and Less Expensive

July 09, 2014 — Beverley BevenFlorez-CDJ STAFF
John P. Ahlers on the Ahlers & Cressman PLLC blog has posted the first of a two-part series on Ways to Make the Construction Dispute Resolution Process More Efficient and Less Expensive: “In our view, construction is well suited to streamlining the resolution process, particularly when experienced lawyers and judges / arbitrators are involved.” “Discovery can take vast amounts of time and cost a company significant resources,” Ahlers wrote. “Many times, only small portions of a deposition might actually be used at the hearing in cross examination. The question then becomes whether the cost of the discovery is providing a return.” Ahlers listed several steps and requirements that arbitrators, judges, or the parties themselves can impose to make the process more efficient, such as client involvement, avoiding too much process at the expense of practical outcomes, discovery limitations, among others. Read the court decision
Read the full story...
Reprinted courtesy of

The Advantages of Virtual Reality in Construction

August 20, 2019 — Spivey Lipsey - Construction Executive
Virtual realty provides an unparalleled spatial sense for visualization at a lower cost than full-scale replicas. Today, VR is being used heavily in preconstruction to align owner expectations and educate design team stakeholders. For those already employing BIM solutions, coordination can be made much more effective by leveraging existing design models with very little added cost. As anyone who has tried a VR headset before can attest, the ability to accurately perceive spatial relationships in design cannot be replicated through traditional 2D media such as screens or paper. VR solutions also have the ability to iterate rapidly. These technologies are linked to BIM, providing real-time feedback as the design changes. This is in stark contrast to traditional full-scale mockups and offline renders, which are cumbersome and time-consuming to update with design changes. Substantial benefits without a hefty price tag Budget limitations and ROI are always a concern with emerging technology. Fortunately, VR comes cheaply with BIM production. These solutions are significantly less expensive than full-scale mockups and far more efficient when compared to longhand sequencing explanations and esoteric detailing of complex designs. Even the most elaborate VR setups are a fraction of overall construction cost, ranging from a few hundred to a few thousand dollars depending on the level of adoption. Reprinted courtesy of Spivey Lipsey, Construction Executive, a publication of Associated Builders and Contractors. All rights reserved. Read the court decision
Read the full story...
Reprinted courtesy of

Second Circuit Affirms Win for General Contractor on No Damages for Delay Provision

September 02, 2024 — Bill Wilson - Construction Law Zone
In NASDI, LLC v. Skanska Koch Inc. Kiewit Infrastructure Co. (JV), 2024 WL 1270188 (2d Cir. Mar. 26, 2024), the U.S. Court of Appeals for the Second Circuit affirmed the District Court’s grant of summary judgment dismissing a subcontractor’s delay claim against a general contractor on a public project in New York state. The Court enforced a typical no-damages-for-delay provision to bar the subcontractor’s breach of contract claim. The no-damages-for-delay provision in the subcontract at issue provided:

NO DAMAGE FOR DELAY. Except as otherwise provided …, Subcontractor agrees that it shall have no Claim against Contractor for any loss or damage it may sustain through delay, disruption, suspension, stoppage, interference, interruption, compression, or acceleration of Subcontractor’s Work (‘Delay Damages’) caused or directed by Contractor for any reason, and that all such Claims shall be fully compensated for by Contractor’s granting Subcontractor such time extensions as it is entitled to as a result of any of the foregoing.

Read the court decision
Read the full story...
Reprinted courtesy of Bill Wilson, Robinson & Cole LLP
Mr. Wilson may be contacted at wwilson@rc.com

Denver Airport Terminates P3 Contract For Main Terminal Renovation

November 12, 2019 — Mark Shaw - Engineering News-Record
In a move that stunned transportation planners around the country, Denver International Airport terminated the contractor team working on a $650-million terminal renovation. The move also ended the airport’s $1.8-billion public-private partnership with Great Hall Partners, a consortium led by Ferrovial Airports, with partners Saunders/JLC Infrastructure. Mark Shaw, Engineering News-Record Mr. Shaw may be contacted at shawm@enr.com Read the full story... Read the court decision
Read the full story...
Reprinted courtesy of

FAIRFIELD CONNECTICUT BUILDING EXPERT DIRECTORY AND CAPABILITIES