Seattle Washington Building Expert Directory

Enerpac Plays Critical Role in Industry-changing Discovery for Long Span Bridges at The University of Nebraska-Lincoln

April 19, 2022 — Enerpac
MENOMONEE FALLS, Wis. (April 18, 2022) – Three years ago when Marc Maguire, assistant professor of construction programs at the University of Nebraska-Lincoln, started investigating a new stranded wire product for bridge girder reinforcing he thought the best strands for bridge construction were the industry standard 7-wire strands. After running a multitude of analyses, Maguire and student researchers found that 19-wire 1-1/8 in. diameter strands outperform the typical 7-wire 1-1/6 in. diameter strands and allow bridges to reach unprecedented lengths. Further tests conducted by the Durham School of Architectural Engineering and Construction with the help of Enerpac hydraulic tools examined the bond strength, force transfer, and development length of the 19-wire strands. "Traditionally, 19-wire strands are not often used in the U.S. because they are not widely available and they are much larger than standard strands," said Maguire. "We wanted to show that there was an alternative option to the common 7-wire strand--one that can perform at the same level, if not better." About Enerpac Enerpac is a global market leader in high pressure hydraulic tools, controlled force products, portable machining, on-site services and solutions for precise positioning of heavy loads. As a leading innovator with a 110-year legacy, Enerpac has helped move and maintain some of the largest structures on earth. When safety and precision matters, elite professionals in industries such as aerospace, infrastructure, manufacturing, mining, oil & gas and power generation rely on Enerpac for quality tools, services and solutions. For more information, visit www.enerpac.com. Read the court decision
Read the full story...
Reprinted courtesy of

Guardrail Maker Defrauded U.S. of $175 Million and Created Hazard, Jury Says

October 22, 2014 — Patrick G. Lee – Bloomberg
Secret changes by Trinity Industries Inc. to its guardrail systems were found to have cheated the U.S. government, exposing the company to $1 billion in damages and penalties and sending shares plummeting as states question the safety of the product. The east Texas jury’s verdict comes as scrutiny of the highway-safety product called the ET-Plus intensifies across the country after it’s been blamed for multiple deaths. The Federal Highway Administration this month asked all states to start submitting information on crashes involving the ET-Plus to the agency’s safety office. The agency will evaluate the findings of the case and “consider whether it affects the continued eligibility of the ET-Plus,” Brian Farber, a spokesman for the Department of Transportation, said in an e-mail. Read the court decision
Read the full story...
Reprinted courtesy of Patrick G. Lee, Bloomberg
Mr. Lee may be contacted at plee315@bloomberg.net

North Carolina Appeals Court Threatens Long-Term Express Warranties

April 09, 2014 — Beverley BevenFlorez-CDJ STAFF
Jonathan Massell of the firm Nexsen Pruet explained how a “recent holding by the North Carolina Court of Appeals is threatening to render many long-term express warranties ineffective,” in the online publication Lexology. In Christie v. Hartley Construction, Inc., “the court held that the six-year North Carolina statute of repose for improvements to real property trumps the bargained-for duration terms of an express warranty.” In the Christie case, this meant that even though the homeowners had a twenty year warranty, because of the statute of repose, the warranty effectively expired after six years. Massell stated to “be mindful of jurisdiction.” If the express warranty is in a state other than North Carolina, it’s possible that the claim could be filed in that state instead of North Carolina. For instance, according to Massell, South Carolina’s “statue of repose does not expire until eight years after the date of substantial completion for an improvement to real property.” Furthermore, “long-term warranties are not trumped by the South Carolina statute of repose.” Read the court decision
Read the full story...
Reprinted courtesy of

Best Practices for Installing Networks in New Buildings

August 14, 2023 — Patrick Chown - Construction Executive
A previous article, "How to Install Networks in an Old Building," discussed the various challenges of implementing networking infrastructure in older spaces. The building layout, age of the building and use cases were the major challenges involved. New buildings provide an opportunity to incorporate state-of-the-art networking infrastructure from the ground up. Careful planning and foresight are essential to ensure optimal network performance and avoid future issues. In new buildings, including corporate offices, multifamily residential complexes, hospitals, educational institutions and retail spaces, the potential use cases and users can vary significantly. Each of these spaces comes with its unique networking requirements. Regardless of the specific network applications, there are fundamental frameworks and best practices that can be employed to build a solid network foundation. By following these guidelines and adapting them to the specific needs of your new building, you can ensure a robust and flexible network infrastructure that accommodates ever-evolving technological demands. Reprinted courtesy of Patrick Chown, Construction Executive, a publication of Associated Builders and Contractors. All rights reserved. Read the court decision
Read the full story...
Reprinted courtesy of

What If There Is a Design Error?

October 30, 2023 — Scott L. Baker - Los Angeles Litigation Blog
Many challenges can crop up when working on a construction project. Among these challenges, errors are the last thing that contractors or project owners want to face. Yet, they are not uncommon as you navigate the process. Design errors or mistakes are one such issue that can result in serious construction disputes and delays. It is important to determine who is liable when it comes to defects and design errors. So, who is responsible for design errors? Many might assume the architect – or the person who created the project design – is responsible for design errors. That is not necessarily true. Read the court decision
Read the full story...
Reprinted courtesy of Scott L. Baker, Baker & Associates
Mr. Baker may be contacted at slb@bakerslaw.com

Another Colorado Construction Defect Reform Bill Dies

May 07, 2014 — Beverley BevenFlorez-CDJ STAFF
Colorado construction defects reform Senate Bill 220 died when “Senate President Morgan Carroll, D-Aurora, declined to call a second committee to hear” the bill, according to Ed Sealover writing for the Denver Business Journal. Sen. Carroll declared that the “bill backers” did not incorporate any of the “suggestions she or House Speaker Mark Ferrandino had given them.” “SB 220 would have required condo-unit owners to submit to alternative-dispute resolution such as arbitration or mediation if the unit developer required it,” Sealover reported. “And it would have required that a majority of members of a homeowners association agree to file a lawsuit, a standard significantly larger than the two-person bar that now must be met.” Bill Cosponsor Sen. Mark Scheffel, R-Castle Rock, “believes litigation reform” will become “an election issue and” that it “has strong momentum heading into the 2015 session.” Read the court decision
Read the full story...
Reprinted courtesy of

You Can Take This Job and Shove It!

June 10, 2015 — Garret Murai – California Construction Law Blog
That’s it. You’ve had it. They can take their job and shove it! But can you really tell an owner on a construction project to proverbially shove it where the sun don’t shine? Well, far be it for me to tread on your First Amendment Rights or stick my nose into the subsequently brought public disturbance charges against you. But can you legally tell an owner to shove it, and that you’re no longer going to perform work on their [insert expletive] project? Well, indeed you can, in limited circumstances, and it’s called a “Stop Work Notice.” Note: A stop work notice is different from a stop payment notice. What is a stop work notice? A stop work notice is a notice given by a direct contractor to a project owner that the contractor will stop work if an amount owed to the contract is not paid within 10 days after notice is given. Read the court decision
Read the full story...
Reprinted courtesy of Garret Murai, Wendel Rosen Black & Dean LLP
Mr. Murai may be contacted at gmurai@wendel.com

Construction Defect Claim not Barred by Prior Arbitration

October 28, 2015 — Beverley BevenFlorez-CDJ STAFF
According to Stan Martin of Commonsense Construction Law LLC, the Appellate Court of Connecticut ruled in favor of the owner of a twenty-two building development in a construction defect suit despite the contractor’s objection “that the lawsuit was barred by doctrines of res judicata or collateral estoppel.” When issues of “construction and alleged defects” arose in 1996, the “contractor eventually filed for arbitration, seeking the contract balance.” The contractor was awarded $82,812.81. During the arbitration, “no claims for defective construction were advanced.” Read the court decision
Read the full story...
Reprinted courtesy of

SEATTLE WASHINGTON BUILDING EXPERT DIRECTORY AND CAPABILITIES