Ensuing Loss Provision Found Ambiguous
April 25, 2012 —
Tred R. Eyerly - Insurance Law HawaiiAfter the insurer denied coverage in a homeowner’s policy for construction defects under various exclusions, the court found the ensuing loss provision was ambiguous.Kesling v. Am. Family Mut. Ins. Co., 2012 U.S. Dist. LEXIS 38857 (D. Colo. March 22, 2012).
After purchasing a home from the sellers, the insureds noticed problems with the deck of the home. Massive cracking appeared, causing lifting and leaking on the deck and water running through the exterior foundation wall into the home. There was also damage to the roof and crawlspace.
The insureds had a homeowner’s policy with American Family, which covered accidental direct physical loss to property described in the policy unless the loss was excluded. They requested coverage for "conditions, defects and damages." American Family denied coverage because wear and tear, as well as damage to foundations, floors and roofs were excluded. The policy did provide coverage, however, for "any resulting loss to property described . . . above, not excluded or excepted in this policy.
When coverage was denied, the insureds sued American Family.
Read the full story…
Reprinted courtesy of Tred R. Eyerly, Insurance Law Hawaii. Mr. Eyerly can be contacted at te@hawaiilawyer.com
Read the court decisionRead the full story...Reprinted courtesy of
Landmark Towers Association, Inc. v. UMB Bank, N.A. or: One Bad Apple Spoils the Whole Bunch
May 12, 2016 —
Jean Meyer - Colorado Construction LitigationOn April 21, 2016, the Colorado Court of Appeals issued an opinion that immediately drew the ire of the greater real estate development industry and those concerned about affordable housing in a state in the midst of unprecedented soaring rent and housing prices. The Landmark Towers Assn., Inc. v. UMB Bank, N.A., 2016 COA 61, decision is the result of protracted litigation arising out of construction and sale of the ill-fated European Village (“Village”) residential community. For a thorough summary of the origins of the development and the unfortunate story of the man behind the curtain, review the Denver Post’s article titled “Zachary Davidson, Denver Landmark developer, and his fall from grace.” (http://www.denverpost.com/ci_22656011/fall-from-grace-zach-davidson-landmark denver)
Despite the unique facts and circumstances relating to the questionable dealings by the developer, Mr. Zachary Davidson, the decision now stands to turn the Colorado real estate development business on its head. Specifically, a group of condominium owners, who did not live in the Village, learned that their properties had been included in a special district, the Marin Metropolitan District (“District”), to finance the Village. Prior to their purchase, Mr. Davidson failed to disclose to the condominium owners that they would be responsible for financing the Village’s development through previously issued bonds by the District to be paid for through their property taxes. Understandably frustrated by this discovery the condominium owners, through the Landmark Towers Association, Inc. (“Landmark HOA”), investigated the origin of these unforeseen property taxes.
Read the court decisionRead the full story...Reprinted courtesy of
Jean Meyer, Higgins, Hopkins, McLain & Roswell, LLCMr. Meyer may be contacted at
meyer@hhmrlaw.com
Town Sues over Defective Work on Sewer Lines
January 13, 2014 —
CDJ STAFFThe Handy Sanitary District in North Carolina has filed a lawsuit against one of the subcontractors on the Badin Lake Sewer Project, which the Lexington Dispatch describes as “delay riddled.” The town claims that the materials used by Hobbs, Upchurch and Associates “were not adequate for the project.” Additionally, the town claims that valves were improperly installed or damaged, and that pipes were of the incorrect type and improperly connected.
The Sanitary District Board of Commissioners has additionally settled a lawsuit over non-payment for work on the sewer project. The Handy Sanitary District has settled claims brought by Monroe Roadways Contractors and Young Construction with a payment of $250,000.
Read the court decisionRead the full story...Reprinted courtesy of
CDJ’s #8 Topic of the Year: California’s Board of Equalization Tower
December 31, 2014 —
Beverley BevenFlorez-CDJ STAFFImagine a workplace where bats fly, floors flood, and glass panels randomly pop out of the building to shatter on the sidewalk. Add to that repairs that could total more than twice the purchase price, and you have a story. Especially when it involves a California government facility. Jon Ortiz of the Sacramento Bee shared the story on Insurance News.
Read the court decisionRead the full story...Reprinted courtesy of
Standard of Care
December 16, 2019 —
Jay Gregory - Gordon & Rees Construction Law BlogOne of the key concepts at the heart of Board complaints and civil claims against a design professional is whether or not that design professional complied with the applicable standard of care. In order to prevail on such a claim, the claimant must establish (typically with the aid of expert testimony) that the design professional deviated from the standard of care. On the other side of the coin, to defend a design professional against a professional malpractice claim, defense counsel attempts to establish that – contrary to the claimant’s allegations – the design professional, in fact, complied with the standard of care. Obviously, it becomes very important in such a claim situation to determine what the standard of care is that applies to the conduct of the defendant design professional. Often, this is easier said than done. There is no dictionary definition or handy guidebook that identifies the precise standard of care that applies in any given situation. The “standard of care” is a concept and, as such, is flexible and open to interpretation. Traditionally, the standard of care is expressed as being that level of service or competence generally employed by average or prudent practitioners under the same or similar circumstances at the same time and in the same locale. In other words, to meet the standard of care a design professional must generally follow the pack; he or she need not be perfect, exemplary, outstanding, or even superior – it is sufficient merely for the designer to do that which a reasonably prudent practitioner would do under similar circumstances. The negative or reverse definition also applies, to meet the standard of care, a practitioner must refrain from doing what a reasonably prudent practitioner would have refrained from doing.
Although we have this ready definition of the standard of care, in any given dispute it is practically inevitable that the parties will have markedly different opinions as to: (1) what the standard of care required of the designer; and (2) whether the defendant design professional complied with that requirement. The claimant bringing a claim against a design professional typically will be able to find an expert reasonably qualified (at least on paper) who will offer an opinion that the defendant failed to comply with the standard of care. It is just as likely that the counsel for the defendant design professional will be able to find his or her own expert who will counter the opinion of the claimant’s expert and maintain that the defendant design professional, in fact, complied with the standard of care. What’s a jury to think?
The concept of standard of care is intertwined with the legal concept of negligence. In the vast majority of law suits against design professionals, a claimant (known as the plaintiff) will assert a claim for negligence against the design professional now known as the defendant.1 As every first year law student learns while studying the field of “Torts,” negligence has four subparts. In order for a defendant to be found negligent, the claimant must establish four elements: (1) duty; (2) breach; (3) causation; and (4) damages. In other words, to establish a claim against a defendant design professional, a plaintiff must demonstrate that the defendant owed the plaintiff a duty of care but breached that duty and, as a result, caused the plaintiff to suffer damages.
Read the court decisionRead the full story...Reprinted courtesy of
Jay Gregory, Gordon & Rees Scully MansukhaniMr. Gregory may be contacted at
jgregory@grsm.com
AB5 Construction Exemption – A Checklist to Avoid Application of AB5’s Three-Part Test
February 18, 2020 —
Blake Dillion - Payne & Fears LLPConstruction companies have a unique opportunity to avoid the application of the restrictive new independent contractors law that took effect this year. This article provides a checklist that will help construction companies determine whether their relationships with subcontractors qualify for this exemption.
California’s Assembly Bill 5 (“AB5”), which went into effect Jan. 1, 2020, enacts into a statute last year’s California Supreme Court decision in
Dynamex Operations West, Inc. v. Superior Court, 4 Cal. 5th 903 (2018), and the Court’s three-part standard (the “ABC test”) for determining whether a worker may be classified as an employee or an independent contractor.
Certain professions and industries are potentially exempt from this standard, including the construction industry. The ABC test does not apply to the relationship between a contractor and an individual performing work pursuant to a subcontractor in the construction industry, if certain criteria are met. In order for the “construction exemption” to apply, the contractor must demonstrate that all of the following criteria are satisfied.
- The subcontract is in writing;
- The subcontractor is licensed by the Contractors State License Board and the work is within the scope of that license;
- If the subcontractor is domiciled in a jurisdiction that requires the subcontractor to have a business license or business tax registration, the subcontractor has the required business license or business tax registration;
- The subcontractor maintains a business location that is separate from the business or work location of the contractor;
- The subcontractor has the authority to hire and to fire other persons to provide or assist in providing the services;
- The subcontractor assumes financial responsibility for errors or omissions in labor or services as evidenced by insurance, legally authorized indemnity obligations, performance bonds, or warranties relating to the labor or services being provided; and
- The subcontractor is customarily engaged in an independently established business of the same nature as that involved in the work performed.
The contractor must be able to establish each of the above criteria for the construction exemption to apply. If the contractor is successful, the long standing multi-factor test for determining independent contractor vs. employee status as described in
S.G. Borello & Sons, Inc. v. Dep’t of Industrial Relations, 48 Cal. 3d 341 (1989) will apply.
You should review your processes and procedures for engaging subcontractors to ensure that you can satisfy the above criteria. If you have questions about the application of AB5, the construction exemption, or the
Borello factors, you should speak with an attorney.
Read the court decisionRead the full story...Reprinted courtesy of
Blake A. Dillion, Payne & FearsMr. Dillion may be contacted at
bad@paynefears.com
Is the Sky Actually Falling (on Green Building)?
November 03, 2016 —
Christopher G. Hill – Construction Law MusingsI have spoken on many occasions here at Construction Law Musings and elsewhere about the risks and rewards for contractors found in sustainable construction. The rewards were fairly apparent. New markets, government incentives and the desires of owners to be “green” clearly point toward a need for contractors to get into the sustainable building game.
However, when I was first writing my Eeyore like thoughts most of the thoughts of all us construction attorneys were speculative. Whether because wholesale “green” construction was relatively new or because the court process was relatively slow, there were not many ways to test if our, shall we say “less optimistic,” predictions were going to come to pass.
For better or worse, several of the more dire predictions have come true. One major green construction debacle is the Destiny USA litigation. I cannot possibly set out all of the various issues as well as my friend and colleague Chris Cheatham does in his e-book about the project and its aftermath. I highly recommend this e-book and the posts found at Chris’ Green Building Law Update blog for those of you interested in how the IRS, the USGBC and the Green Bonds Program interact to cause many a pitfall for construction and design professionals.
Read the court decisionRead the full story...Reprinted courtesy of
Christopher G. Hill, The Law Office of Christopher G. Hill, PCMr. Hill may be contacted at
chrisghill@constructionlawva.com
Architects Should Not Make Initial Decisions on Construction Disputes
July 05, 2023 —
Bill Wilson - Construction Law ZoneA common provision often deleted from the standard form AIA documents is the provision in the AIA A201 General Conditions requiring an Initial Decision Maker (IDM) for claims between the contractor and owner. In the A201, the contracting parties have the option of naming their own IDM for the project. If an IDM is not selected (which is typically the case) the architect serves this role by default. While it is in all parties’ best interests to resolve disputes quickly and efficiently, using the architect as the IDM is not the best way to achieve such a resolution.
Several reasons work against using the architect as the IDM. Contractors typically don’t trust architects to be impartial in resolving disputes because the architect is paid by the owner. Most architects don’t have the temperament or any training to facilitate dispute resolution. An architect’s “initial decision” could even drive the parties further apart and lead to further issues later in the project. The architect may also be perceived to be part of the problem that led to the dispute in the first place. Also, many architects simply prefer to avoid serving the thankless role of an IDM altogether. Lastly, inserting the architect into the dispute resolution process as a required IDM adds an additional unnecessary step to dispute resolution, which can delay the overall procedure.
Read the court decisionRead the full story...Reprinted courtesy of
Bill Wilson, Robinson & Cole LLPMr. Wilson may be contacted at
wwilson@rc.com
