FAIRFIELD CONNECTICUT BUILDING EXPERT
DIRECTORY AND CAPABILITIES

COVID-19 and Mutual Responsibility Clauses

June 01, 2020 — Joseph M. Leone - ConsensusDocs
As everyone knows, there is a tremendous amount of uncertainty in the construction industry due to the COVID-19 pandemic. Schedules, productivity, safety processes, and seemingly everything else are being affected. In these difficult times, most contractors are making every effort to work together to solve the problems caused by COVID-19. But what happens when differences arise between project owners, contractors, and subcontractors as to the effect of COVID-19 on a project? One party may want to continue pushing the schedule, others may want to slow down, or, more likely, not be able to keep up with the original schedule because of some reason related to COVID-19. As between a prime contractor and a subcontractor, a mutual responsibility clause can provide some clarity or, unfortunately, depending on how the subcontract is written, confusion. Almost all subcontracts have a clause which flows down the prime contractor’s obligations on a project to the subcontractor as applicable to the subcontractor’s work. Known as “flow-down” clauses, this clause works in one direction; obligations of the prime contractor “flow-down” to the Subcontractor. A mutual responsibility clause, in essence, works in both directions. The subcontractor is required to perform its obligations consistent with the prime contractor’s obligations to the owner and the subcontractor is granted the same rights against the prime contractor which the prime contractor has against the owner. Obligations flow down and rights flow up. The rights and obligations flowing through the prime contractor include, the obligation to perform the work in accordance with the plans and specifications, the obligation to meet the schedule constraints in the prime agreement, and the right to extensions of time and change orders to the extent the prime contractor obtains the same. Read the court decision
Read the full story...
Reprinted courtesy of Joseph M. Leone, Drewry Simmons Vornehm, LLP
Mr. Leone may be contacted at jleone@dsvlaw.com

---

The Multigenerational Housing Trend

May 02, 2014 — Beverley BevenFlorez-CDJ STAFF
Reuters reported that “[m]ore than 50 million Americans already live in multigenerational situations, according to Pew Research, and the number is expected to grow as baby boomers age.” Lennar Corp has “Next Gen” home models, which provides multigenerational housing for prices similar to traditional homes. For instance, according to Reuters, one of the Next Gen models contains “an 800-square-foot house-within-a-house” with “a separate entrance and its own patio, plus a bedroom, sitting area, and bathroom.” Other home builders are also providing multigenerational housing: “Gertz Fine Homes, which builds between 12-30 houses a year near Portland, Oregon, says about 30 percent of sales are now multigenerational models, which can cost around $600,000.” Read the court decision
Read the full story...
Reprinted courtesy of

---

SE 2050 Is In Quixotic Pursuit of Eliminating Embodied Carbon in Building Structures

January 23, 2023 — Nadine M. Post - Engineering News-Record
Walking to work one November morning, structural engineer Chris Jeseritz was buoyed by a Nelson Mandela quotation on a digital sign on the side of a Seattle office tower: “A winner is a dreamer who never gives up.” Reprinted courtesy of Nadine M. Post - Engineering News-Record Ms. Post may be contacted at postn@enr.com Read the full story... Read the court decision
Read the full story...
Reprinted courtesy of

---

Contractors Admit Involvement in Kickbacks

December 09, 2011 — CDJ STAFF

Two New Jersey contractors have pleaded guilty to charges that they made false representations for a government contract in a case related to kickbacks for construction work done in two school districts. New Jersey is recommending that the two men, Martin Starr and Stephen Gallagher, will each pay $50,000 in penalties, serve up to a year in jail, and be unable to accept public contracts for five years.

Last month, another individual in the case, Kenneth Disko, who had been the engineer for the school district, pleaded guilty on a similar charge. In addition to a $50,000 penalty, he will be serving three to five years in prison. A fourth conspirator, Robert Berman, the former business administrator for one of the school districts, has to pay a $13,000 fine and cooperate with the investigation. He is also barred from public employment in New Jersey and has been terminated from his position.

Starr admitted to preparing fictitious quotes which appeared to be from other contractors in order that his firm would seem to be the lowest bidder. Gallagher helped in preparing the fictitious bids and also provided cash kickbacks to Disko.

Read the full story…

Read the court decision
Read the full story...
Reprinted courtesy of

---

Know your Obligations: Colorado’s Statutory Expansions of the Implied Warranty of Habitability Are Now in Effect

November 04, 2019 — Luke Mecklenburg - Snell & Wilmer Real Estate Litigation Blog
The Colorado legislature had a busy session this year. Among the several significant bills it enacted, HB1170 strengthens tenant protections under the implied warranty of habitability. It became effective on August 2, 2019, so landlords and tenants alike are now subject to its requirements. The bill makes numerous changes to Colorado’s implied warranty of habitability, and interested parties should review the bill in detail. Landlords in particular may want to consider retaining legal counsel to make sure they have proper procedures in place to promptly deal with any habitability complaints within the new required timelines. This posting is not intended to provide a comprehensive guide to the changed law, but simply to highlight some of the most significant changes. With that caveat, landlords and tenants should be aware that as of August 2, 2019:

• The following conditions are now deemed to make a residential residence uninhabitable for the purposes of the implied warranty of habitability:
  • The presence of mold, which is defined as “microscopic organisms or fungi that can grow in damp conditions in the interior of a building.”
  • A refrigerator, range stove, or oven (“Appliance”) included within a residential premises by a landlord for the use of the tenant that did not conform “to applicable law at the time of installation” or that is not “maintained in good working order.” Nothing in this statute requires a landlord to provide any appliances, but these requirements apply if the landlord either agreed to provide appliances in a written agreement or provided them at the inception of the tenant’s occupancy.
  • Other conditions that “materially interfere with the tenant’s life, health or safety.”
  Read the court decision
  Read the full story...
  Reprinted courtesy of Luke Mcklenburg, Snell & Wilmer
  Mr. Mecklenburg may be contacted at lmecklenburg@swlaw.com

  ---

  What to Expect From the New Self-Retracting Devices Standard

  November 29, 2021 — Andre Pelland - Construction Executive
  One of the latest and most anticipated changes to occur this year relevant to fall protection is the publishing of the ANSI/ASSP Z359.14 2021 revision. Although the effective date isn’t until August 2022, this change is prompting the need for end user to prepare for using and understanding the new terminology performance requirements that will ultimately alter equipment selection criteria. The reason for its relevance is mostly due to its industry dependence and the increasing popularity of these types of devices. This voluntary consensus standard accounts for a vast portion of the fall protection market equipment and has been adopted as the industry standard, even though it is not the legal requirement. To assure a smooth transition, the immediate priority should be to understand the changes and what it means from a usability standpoint. A clear understanding of what changes devices need to comply will allow users to proceed with a comprehensive transition plan. What Are the Most Relevant Changes for the User? Classes The most significant changes are for Class A and B devices used to designate arrest distances and forces and the introduction of the Class 1 and 2 devices. These classes were known as designators for arresting falls at 24 inches and under with higher forces (Class A), and 54 inches and under with lower forces (Class B). Class 1 devices allow anchoring on overhead anchorages only and limitg freefall to no more than two feet. Reprinted courtesy of Andre Pelland, Construction Executive, a publication of Associated Builders and Contractors. All rights reserved. Read the court decision
  Read the full story...
  Reprinted courtesy of
  Mr. Pelland may be contacted at andre.pelland@puresafetygroup.com

  ---

  Texas Court Construes Breach of Contract Exclusion Narrowly in Duty-to-Defend Case

  September 10, 2018 — Lorelie S. Masters & Tae Andrews - Hunton Insurance Recovery Blog
  In a victory for policyholders, a recent decision from the Western District of Texas narrowly construed a common breach-of-contract exclusion and held that the insurer had a duty to defend its insured against an underlying lawsuit over construction defects. The allegations potentially supported a covered claim, as the conduct of the insured’s subcontractor could have been an independent, “but for” cause of the property damage at issue, thereby triggering the insurer’s duty to defend. In Slay, the insured – a construction company – was hired by a city to design and construct a municipal sports complex, including Little League baseball fields, a softball field, parking lots, and a swimming pool. The construction company hired a subcontractor to perform various services on the project, including paving parking lots and laying the cement for the pool. After completing the project, one of the construction company’s employees noticed cracking in the parking lot and the pool. The construction company notified the city and tried to work out a repair plan, but the city refused and eventually sued, alleging construction defects and asserting claims for breach of contract and negligence. Reprinted courtesy of Lorelie S. Masters, Hunton Andrews Kurth and Tae Andrews, Hunton Andrews Kurth Ms. Masters may be contacted at lmasters@HuntonAK.com Mr. Andrews may be contacted at tandrews@HuntonAK.com Read the court decision
  Read the full story...
  Reprinted courtesy of
  

  ---

  AEM Pursuing ISO Standard for Earthmoving Grade-Control Data

  March 09, 2020 — Jeff Rubenstone - Engineering News-Record
  Citing the growing and increasingly crowded field of grade-control systems and site-layout technology, the Association of Equipment Manufacturers (AEM) announced on Feb. 18 that it is working with the International Organization for Standardization (ISO) on a common standard for grade-control data sharing. Jeff Rubenstone, Engineering News-Record Mr. Rubenstone may be contacted at rubenstonej@enr.com Read the full story... Read the court decision
  Read the full story...
  Reprinted courtesy of
  

  ---