Baltimore Project Pushes To Meet Federal Deadline
July 22, 2019 —
Justin Rice - Engineering News-RecordTwo giant anaerobic digesters shaped like Faberge eggs have for years served as landmarks for commuters traveling on Interstate-695 east of downtown Baltimore. And cranes, recently removed, signaled the location of one of the latest projects in a years-long, $1.6-billion construction program to upgrade the 100-year-old Back River Wastewater Treatment Plant. “You probably won’t see a collection of this many ‘sticks’ anywhere else in the city,” Shane Lippert noted back in October.
Read the court decisionRead the full story...Reprinted courtesy of
Justin Rice, ENRMr. Rice may be contacted at
ricej@enr.com
Quick Note: Staying, Not Dismissing, Arbitrable Disputes Under Federal Arbitration Act
July 31, 2024 —
David Adelstein - Florida Construction Legal UpdatesAs you hopefully know from posted articles, arbitration is a creature of contract. Stated differently, there must be a contractual basis to have a dispute resolved through binding arbitration. The Federal Arbitration Act (FAA) applies to transactions involving interstate commerce. Oftentimes, lawsuits are filed despite an arbitration provision in a contract because parties can, if they desire, waive their rights to have their dispute resolved through binding arbitration.
In what should not be a shocker, the United States Supreme Court in Smith v. Spizzirri, 144 S.Ct. 1173, 1178 (2024), held that when a federal “district court finds that a lawsuit involves an arbitrable dispute, and a party requests a stay pending arbitration, section 3 of the FAA compels the court to stay the proceeding.” Dismissing the lawsuit should not be the option. Staying the lawsuit should.
Read the court decisionRead the full story...Reprinted courtesy of
David Adelstein, Kirwin Norris, P.A.Mr. Adelstein may be contacted at
dma@kirwinnorris.com
What if the "Your Work" Exclusion is Inapplicable? ISO Classification and Construction Defect Claims.
February 14, 2023 —
David Humphreys - Carson Law Group, PLLCThis article was first published by the National Association of Home Builders (NAHB) on their NAHBNow blog
One of the risks faced by a residential builder is that, following completion of construction, the homeowner may assert a claim against the builder for damage to the home caused by an alleged construction defect. One of the ways a builder manages the risk of such construction defect claims is by purchasing commercial general liability (“CGL”) insurance.
A builder’s CGL policy covers those sums the builder is legally obligated to pay as damages because of bodily injury or property damage caused by an “occurrence,” that is, damage that is accidental rather than being expected or intended by the builder, so long as the claim does not fall within any of the policy’s several “exclusions” from coverage.
When faced with a construction defect lawsuit, our builder clients are often surprised—and dismayed—when their CGL insurer denies coverage and refuses to defend the builder. However, builders shouldn’t take their insurer’s denial of coverage at face value. This article discusses a new argument we recently discovered that has been a game-changer for our builder clients who were denied coverage in construction defect cases.
Whether coverage exists always depends on the specific language of the particular CGL policy, and courts generally construe exclusions against insurers. This allows experienced coverage attorneys to, at times, successfully challenge declinations of coverage and, at a minimum, convince insurers to pay for the builder’s defense.
A typical CGL policy provides products-completed operations coverage, which is sought by businesses that face potential liability arising out of the products that they have sold or operations that they have completed. Products-completed operations coverage allows builders to obtain many years of coverage for a completed project. Over the years, insurers have added to their policies modifications and exclusions that limit their exposure for claims that fall under that coverage.
Exclusion (l) or the “your work” exclusion, will often exclude coverage for a latent defect claim against the builder. A standard “your work” exclusion provides:
This insurance does not apply to: . . . “[p]roperty damage” to “your work” arising out of it or any part of it and included in the “products-completed operations hazard.”
This “your work” and similar exclusions are designed to limit coverage for business risks that are within the contractor’s own control; e.g., a claim that the contractor caused damage to the contractor’s own work. These exclusions apply both to ongoing and completed projects, which can leave a builder unprotected from lawsuits for years after a project is completed.
However, builders who are classified on the declarations page with Code 91580 Contractors— Executive Supervisors or Executive Superintendents, may not be subject to the “your work” exclusion. 91580 is a common classification assigned to builders during insurance underwriting. This classification falls into what is referred to as “dagger class” or “plus sign class,” which indicates that Products and/or Completed Operations coverage is
included as part of and not separate from the Premises/Operations coverage (emphasis added).
It has been noted that dagger” and “plus sign” classifications create confusion because of the seeming contradiction between policy wording and coverage rules.* The CGL policy seems to expressly exclude products and/or completed operations losses for “dagger” or “plus sign” classes. In the definitions section we find the following:
“Products-completed operations hazard”: . . .b. Does not Include “bodily Injury” or “property damage” arising out of:. . . (3) Products or operations for which the classification, listed In the Declarations or in a policy schedule, states that products- completed operations are subject to the General Aggregate Limit.”
This apparent exclusionary language, however, must be read in conjunction with the Insurance Services Office’s (ISO) Rule 25.F.1.:
Rule 25. CLASSIFICATIONS
F. Symbols
1. Plus Sign
A plus sign when shown in the Premium Base column under General Liability insurance in the Classification Table - means that coverage for Products and/or Completed Operations is included in the Premises/Operations coverage at no additional premium charge. When this situation applies, the classification described in the policy schedule or Declarations must state that:
“Products-completed operations are subject to the General Aggregate Limit” to provide Products and/or Completed Operations coverage(s).
When read together then, the exclusionary wording in the policy definition removes any product or operation loss subject to the “dagger” or “plus sign” classification from the definition of Products Completed Operations Hazard. Under the dagger or plus sign classification of Rule 25, coverage for products and/or operations is included in the premises operations coverage. Consequently, a loss can no longer be defined as a product completed loss, and as a result it is no longer subject to the “your work” exclusion.
Recall that the standard “your work” exclusion quoted above excludes coverage for “property damage” to “your work” “arising out of it or any part of it
and included in the “products-completed operations hazard”.” Here, we emphasize “and” because the “your work” exclusion applies only to property damage that is also included in the “products-completed operations hazard.” Since property damage claims arising under “plus sign” classifications are expressly excluded from the “products-completed operations hazard” (they are included in the premises/operations coverage) the “your work” exclusion simply does not apply. This means that, if your CGL insurer denies your construction defect claim based on the “your work” exclusion, do what the title of this article suggests: Check your ISO classification! If 91580 “Executive Supervisors or Executive Superintendents” is listed on your Declarations page, you may be in luck.
This new ISO classification-based coverage argument will likely also apply to other exclusions and endorsements that CGL insurers routinely rely on in denying coverage in construction defect cases. We recently successfully challenged a coverage denial based on the following “prior work” exclusionary endorsement:
”This insurance does not apply to ‘your products’ or ‘your work’ completed prior to” a certain date listed in the endorsement. . .
“Specifically, this insurance does not apply to. . . “property damage”. . . included in the ‘products-completed operations hazard’ and arising out of. . . ‘your work’ performed by or on behalf of you prior to the date shown above.”
Again, this endorsement incorporates the “products-completed operations hazard,” which allowed us to successfully argue that the exclusion was inapplicable to a builder classified as a 91580 “Executive Supervisor or Executive Superintendent.”
To our knowledge, this new ISO classification-based coverage argument has not yet been addressed by a court. Our recent successes with it have concluded with favorable settlements for our clients. Accordingly, for now, the ISO classification-based argument is a powerful new tool to challenge denials of coverage in construction defect cases where the builder is classified under 91580 “Executive Supervisors or Executive Superintendents.”
David Humphreys is a Partner at Carson Law Group, PLLC, and has been representing construction contractors, subcontractors, and owners for more than two decades in Mississippi and throughout the Southeast.
*See “Dagger” or Plus Symbol Classes: What They Mean, Chris Boggs - Virtual University | “Dagger” or Plus Symbol Classes: What They Mean) (independentagent.com)
Read the court decisionRead the full story...Reprinted courtesy of
Illinois Appellate Court Addresses Professional Services Exclusion in Homeowners Policy
August 03, 2022 —
James M. Eastham - Traub LiebermanIn Stonegate Ins. Co. v. Smith, 2022 IL App (1st) 210931, the Insured was performing plumbing work at a multi-story townhouse when a fire ensued causing damage to the second story unit. Although a carpenter by trade, the Insured was performing plumbing work consisting of the replacement of a shower valve as a favor for a friend. To accomplish the task, the Insured utilized a small propane torch to attempt to remove the old water piping to the shower. In doing so, the insulation behind the bathroom wall caught fire and the flame spread upward to the neighboring unit. Stonegate had issued a homeowner’s policy to the Insured during the relevant time period. The homeowner's policy excluded coverage for property damage "[a]rising out of the rendering of or failure to render professional services." Subsequent to tender of the loss, Stonegate initiated a declaratory judgment action seeking a declaration that it owned no duty to defend or indemnity pursuant to the professional services exclusions.
In finding in favor of the Insured, the Court began its analysis by noting that the homeowner's policy did not define the term "professional services" such that it was the Court’s task to determine whether the Insured’s work qualified as a "professional service" for purposes of the exclusion. The Court further prefaced its holding by stating that for an exclusionary clause to effectively deny coverage, its applicability must be clear and free from doubt because any doubts as to coverage will be resolved in favor of the insured. Looking to Illinois case precedent, the Court found that the term "professional service" is not limited to services for which the person performing them must be licensed by a governmental authority. Rather, "professional services" encompass any business activity conducted by an insured that (1) involves specialized knowledge, labor, or skill, and (2) is predominantly mental or intellectual as opposed to physical or manual in nature.
Read the court decisionRead the full story...Reprinted courtesy of
James M. Eastham, Traub LiebermanMr. Eastham may be contacted at
jeastham@tlsslaw.com
ASCE Releases New Report on Benefits and Burdens of Infrastructure Investment in Disadvantaged Communities
February 05, 2024 —
The American Society of Civil EngineersWashington — The
American Society of Civil Engineers today released a new paper, Measuring the Benefits and Burdens of Infrastructure in Disadvantaged Communities. The report looks at how several communities across the country consider equity when investing infrastructure funds, and the impact of those projects on lower-income communities.
"Civil engineers are focused on improving quality of life by building systems that improve the public's health, safety, and well-being," said Marsia Geldert-Murphey, P.E., 2024 President, ASCE. "However, the decisions on how and where infrastructure is built can affect communities for decades after a project is complete. By looking at the benefits and burdens of past projects, infrastructure owners and developers can find better ways to consider the impact of infrastructure projects being designed now."
Some of the recommendations in the paper include encouraging government and other infrastructure stakeholders to use community engagement and transparent metrics when making decisions about proposed infrastructure investments. It also encourages post-project assessments and the use of existing resources to evaluate the positive and unexpected consequences of past infrastructure projects.
Measuring the Benefits and Burdens of Infrastructure in Disadvantaged Communities is
available here.
ABOUT THE AMERICAN SOCIETY OF CIVIL ENGINEERS
Founded in 1852, the American Society of Civil Engineers represents more than 150,000 civil engineers worldwide and is America's oldest national engineering society. ASCE works to raise awareness of the need to maintain and modernize the nation's infrastructure using sustainable and resilient practices, advocates for increasing and optimizing investment in infrastructure, and improve engineering knowledge and competency. For more information, visit www.asce.org or www.infrastructurereportcard.org and follow us on Twitter, @ASCETweets and @ASCEGovRel.
Read the court decisionRead the full story...Reprinted courtesy of
Change #7- Contractor’s Means & Methods (law note)
March 28, 2018 —
Melissa Dewey Brumback - Construction Law in North CarolinaFirst, a little history: as you know, means, methods, techniques, sequences, and procedures are all part of the Contractor’s responsibility on a construction site. However, when the AIA A201 was last revised, in 2007, there was a provision put in for that rare time when the Contract Documents gave specific instructions concerning a particular construction method. If the Contractor viewed such instructions as unsafe, he was to give notice to the Owner and Architect, and was not to proceed with that portion of the Work without further written instructions from the Architect. If the Architect directed him to proceed, the Contractor was absolved from any risks with following that instruction. Instead, the Owner assumed the responsibility for any loss or damage.
Read the court decisionRead the full story...Reprinted courtesy of
Melissa Dewey Brumback, Construction Law in North Carolina
The Impact of the IIJA and Amended Buy American Act on the Construction Industry
May 23, 2022 —
Chad Theriot & Stan Milan - ConsensusDocsContractors working on federally funded construction projects need to be aware of the new Infrastructure Investment and Jobs Act (IIJA) and amendments to the Buy American Act (BAA) which have expanded the requirement that contractors use domestic goods and materials on their projects. Failure to consider these requirements could have far-reaching impacts.
Overview of Domestic-Procurement Laws and Regulations
A number of domestic-preference laws exist today, which generally require that certain goods purchased with federal funds must be produced primarily in the United States. Projects affected include Department of Transportation (DOT)-funded highways, public transportation, airports, aviation, and rail, and Environmental Protection Agency (EPA)-funded water infrastructure initiatives, among others.
Reprinted courtesy of
Chad Theriot, Jones Walker (ConsensusDocs) and
Stan Millan, Jones Walker (ConsensusDocs)
Mr. Theriot may be contacted at ctheriot@joneswalker.com
Mr. Millan may be contacted at smillan@joneswalker.com
Read the court decisionRead the full story...Reprinted courtesy of
Toolbox Talk Series Recap – Arbitration Motion Practice
August 07, 2023 —
Michael Zehner - The Dispute ResolverIn the June 22, 2023 edition of the Toolbox Talk Series,
Adrian Bastianelli, Peckar & Abramson, P.C., and
Brian Cashmere, Williams Mullen, moderated by Jennifer Millender of the American Arbitration Association (“AAA”), discussed motion practice in arbitration. Specifically, they offered advice on how to choose the right issue for a motion, how to get approval for a motion, how to write the motion, and how to get the arbitrator to grant it. They also discussed the pros and cons of motion writing in arbitration settings.
1. How to choose the “right issue” for a motion in arbitration
The panel discussed what type of issues can, or should, be brought up in a motion in arbitration. Cashmere stated that a clear and concise issue is best for this type of review. For example, statute of limitations, notice, or contract interpretation issues may make great summary judgment or partial summary judgment motions. Essentially, an issue that the arbitrator may resolve via primarily a question of law is more likely to succeed. Bastianelli warned against submitting just any “available” motion, as the practice may turn the arbitrator against you. Both panelists mentioned the need to consider strategy before filing a motion—ask, “how will filing this motion help or hurt reachingArbi final resolution.” Cashmere noted that sometimes the threat of bringing the issue to a hearing can put pressure on the adverse party in a way that is favorable to your client’s goals; possibly even more so than actually submitting the issue.
Read the court decisionRead the full story...Reprinted courtesy of
Michael Zehner, BBG Construction LawMr. Zehner may be contacted at
mzehner@bbglaw.com
