Fairfield Connecticut Building Expert Directory

3D Printing: A New Era in Concrete Construction

April 11, 2022 — Zoey Zhao - Construction Executive
The construction of buildings using concrete has been around since the time of the Romans. In all those centuries, concrete structures have been built using essentially the same method: forms, reinforcement, mixing, pouring, setting, repeat. The process is costly and time-consuming. The construction of the forms alone demands dozens of workers and requires a substantial amount of lumber, keeping labor and materials costs high. Builders might save some time using prefabricated concrete blocks, but such materials are not appropriate for every construction project and carry their own expenses. For the first time in history, builders have an alternative to traditional concrete construction methods that are more cost-effective, less expensive, more environmentally friendly and allow for a wide range of possible construction projects. Three-dimensional concrete printing for construction has emerged in the building field as a viable and efficient alternative. Reprinted courtesy of Zoey Zhao, Construction Executive, a publication of Associated Builders and Contractors. All rights reserved. Read the court decision
Read the full story...
Reprinted courtesy of
Ms. Zhao may be contacted at zoey@aictbuild.com

Georgia Passes Solar CUVA Bill

April 20, 2017 — David R. Cook Jr. - Autry, Hanrahan, Hall & Cook, LLP
Georgia House Bill 238 authorizes the withdrawal of property from a conservation use covenant for purposes of developing a solar generation plant. Before the law was passed, subject to certain limited exceptions, properties under a conservation use covenant generally could not be developed without breaching the covenant. The new law permits the removal of a portion of the property to be used for solar development without breaching the covenant for the rest of the property. Read the court decision
Read the full story...
Reprinted courtesy of David R. Cook, Autry, Hanrahan, Hall & Cook, LLP
Mr. Cook may be contacted at cook@ahclaw.com

Pine River’s Two Harbors Now Targets Non-Prime Mortgages

November 05, 2014 — Jody Shenn - Bloomberg
Count Two Harbors Investment Corp. (TWO) among investors looking for profits in riskier home loans -- and expecting a market for bonds backed by them to re-emerge even with safer issuance showing limited signs of life. The real-estate investment trust, whose 74 percent total return over the past three years is almost double that of peers, recently told the lenders that have been selling it big, high-quality mortgages that it’s now also seeking to purchase non-prime loans and those with low down payments, Chief Investment Officer Bill Roth said today during a conference call for analysts and investors. “Our expectation and certainly hope would be as this market opens up and becomes fairly meaningful that a securitization market would develop,” he said. Of course, he sees the timeline as “probably measured in years, not months.” Read the court decision
Read the full story...
Reprinted courtesy of Jody Shenn, Bloomberg
Ms. Shenn may be contacted at jshenn@bloomberg.net

Construction defect firm Angius & Terry moves office to Roseville

January 09, 2013 — CDJ STAFF
The law firm Angius & Terry LLP has closed its office on River Park Drive in Sacramento and opened a Roseville office that will allow for growth. The new office at 3001 Lava Ridge Court provides more usable space in a nice area for less money, said Brad Epstein, a local partner with the firm. Five attorneys and three staff moved to the new space in Roseville on Jan. 2. “It can house three additional attorneys — and we plan to grow,” Epstein said. The firm specializes in construction defect litigation and general corporate work for community associations. There are about 800 community associations in the Sacramento area and a handful of small firms that divvy up the work. “Condominium developments and homeowners’ associations never die and always have legal issues,” Epstein said. Angius & Terry has a total of 20 lawyers in six offices, four in California and two in Nevada. Besides Roseville, the firm has offices in Walnut Creek, Manteca, Newport Beach, Reno and Las Vegas. Read the court decision
Read the full story...
Reprinted courtesy of

It Ain’t Over Till it’s Over. Why Project Completion in California Isn’t as Straightforward as You Think

May 07, 2015 — Garret Murai – California Construction Law Blog
Baseball legend Yogi Berra was famous for his pithy quotes such as “the future ain’t what it used to be,” “half the lies they tell about me aren’t true,” and what is probably his most famous, “it ain’t over till it’s over.” The last, of course, begs the question of when over is over? And, on California construction projects when over is over, or more accurately, when a project is complete, can be as paradoxical as a “yogiism.” Why “Completion” is Important in California In California, project “completion,” is important not only for getting paid, but for knowing the deadlines associated with California’s statutory construction payment remedies. Read the court decision
Read the full story...
Reprinted courtesy of Garret Murai, Wendel Rosen Black & Dean LLP
Mr. Murai may be contacted at gmurai@wendel.com

Protecting and Perfecting Your Mechanics Lien when the Property Owner Files Bankruptcy

June 19, 2023 — William L. Porter - Porter Law Group
Introduction/Overview of the Mechanics Lien Law The California mechanics lien is a powerful tool for contractors, subcontractors and materials suppliers to secure payment of unpaid construction debts. A contractor, subcontractor or materials supplier is allowed to record a mechanics lien on real property, based on the value added to the property by the claimant during the construction process. The recorded mechanics lien provides the claimant with legal right to force the sale of the improved real property and thereby obtain the funds necessary to pay the delinquent debt. Under the usual procedure, the first step is the recording of mechanics lien with County Recorder’s office in the County where the property is located. A lawsuit to foreclose on the lien must then be filed in the County Superior Court of that County, within ninty (90) days after the mechanics lien is recorded. The goal of the lawsuit is to obtain a judgment for foreclosure on the mechanics lien by way of a forced sale of the property. The net proceeds of the sale will be used to pay the unpaid construction debt secured by the recorded mechanics lien, assuming that sale proceeds exceed the amount of senior liens and encumbrances. Read the court decision
Read the full story...
Reprinted courtesy of William L. Porter, Porter Law Group
Mr. Porter may be contacted at bporter@porterlaw.com

Good-To-Know Points Regarding (I) Miller Act Payment Bonds And (Ii) Payment Bond Surety Compelling Arbitration

December 22, 2019 — David Adelstein - Florida Construction Legal Updates
Every now and then I come across an opinion that addresses good-to-know legal issues as a corollary of strategic litigation decisions that are questionable and/or creative. An opinion out of the United States District Court of New Mexico, Rock Roofing, LLC v. Travelers Casualty and Surety Company of America, 2019 WL 4418918 (D. New Mexico 2019), is such an opinion. In Rock Roofing, an owner hired a contractor to construct apartments. The contractor furnished a payment bond. The contractor, in the performance of its work, hired a roofing subcontractor. A dispute arose under the subcontract and the roofer recorded a construction lien against the project. The contractor, per New Mexico law, obtained a bond to release the roofer’s construction lien from the project (real property). The roofer then filed a lawsuit in federal court against the payment bond surety claiming it is entitled to: (1) collect on the contractor’s Miller Act payment bond (?!?) and (2) foreclose its construction lien against the lien release bond furnished per New Mexico law. Count I – Miller Act Payment Bond Claiming the payment bond issued by the contractor is a Miller Act payment bond is a head scratcher. This claim was dismissed with prejudice upon the surety’s motion to dismiss. This was an easy call. Read the court decision
Read the full story...
Reprinted courtesy of David Adelstein, Kirwin Norris, P.A.
Mr. Adelstein may be contacted at dma@kirwinnorris.com

Sources of Insurance Recovery for Emerging PFAS Claims

December 17, 2024 — Jasjeet K. Sahani - Saxe Doernberger & Vita, P.C.
This year, the Environmental Protection Agency (“EPA”) issued its first-ever national, legally enforceable drinking water standard to protect communities from exposure to harmful per-and polyfluoroalkyl substances (“PFAS”), also known as “forever chemicals.”[1] In addition, the Food and Drug Administration announced that grease-proofing materials containing PFAS are no longer being sold for use in food packaging in the United States.[2] These are likely the first in a line of many PFAS regulations that will emerge as the harmful effects of PFAS are further understood. With this increasing regulatory focus on PFAS and their harmful effects, companies whose operations might involve these substances should be aware of what they are and potential sources of recovery for claims that arise from their omnipresence. PFAS Background According to the EPA, PFAS are widely used, long-lasting chemicals which break down slowly over time.[3] PFAS can be found in thousands of items, including, but not limited to: pots and pans, cleaning products, fabric and leather coatings, firefighting foam, carpeting, roofing materials, paints, sealants, caulks, and adhesives.[4] Additionally, manufacturing processes, waste storage, and treatment sites commonly release PFAS into the air, soil, and water.[5] Read the court decision
Read the full story...
Reprinted courtesy of Jasjeet K. Sahani, Saxe Doernberger & Vita, P.C.
Ms. Sahani may be contacted at JSahani@sdvlaw.com

FAIRFIELD CONNECTICUT BUILDING EXPERT DIRECTORY AND CAPABILITIES