Fairfield Connecticut Building Expert Directory

Buy America/Buy American, a Primer For Contractors

March 23, 2020 — John P. Ahlers - Ahlers Cressman & Sleight PLLC
President Trump has promoted his campaign agenda—bringing manufacturing jobs back to the United States (especially jobs relating or pertaining to the steel industry.) To do this, he has strengthened domestic preferences through the Buy America and Buy American Acts.[1] 1. Buy America Act: The Buy America Act refers to a collection of domestic contract restrictions pertaining to the U.S. Department of Transportation/Federal Highway Administration projects (highway, mass transit and other transportation projects). The USDOT grants provided to state and local governments prohibit the federal government from obligating funds unless the steel, iron and manufactured products used in the projects are produced in the U.S. Generally, Buy America applies to projects where USDOT provides part of the funding, applies to steel, iron and manufactured products, and requires that “all manufacturing processes, including application of a coating, for these materials…occur in the United States.”

Buy American: Buy American is critical for construction contractors because FAR 52.225-9 requires that all federal construction contracts under approximately $7 million[2] contain a clause which mandates that contractors use “only domestic construction material in performing [the] contract.” [Note: This requirement is not limited to steel and steel products, as the Buy America Act is.]

Read the court decision
Read the full story...
Reprinted courtesy of John P. Ahlers, Ahlers Cressman & Sleight PLLC
Mr. Ahlers may be contacted at john.ahlers@acslawyers.com

Manufacturer of Asbestos-Free Product May Still Be Liable for Asbestos Related Injuries

July 30, 2015 — Kristian B. Moriarty, R. Bryan Martin and Lee Marshall – Haight Brown & Bonesteel LLP
In Sherman v. Hennessy Industries, Inc. (No. B252566, filed June 18, 2015), the Court of Appeal, Second District, reversed a trial court’s grant of summary judgment in favor of a manufacturer of a brake grinding machine. The Court cited an exception to the general rule that manufacturers may not be held liable, under a strict products liability theory, where the plaintiff’s injuries arise from other products that are used in conjunction with the defendant’s product. Plaintiff and appellant, Michael Sherman, was an automobile mechanic from 1962 to 1977. Mr. Sherman alleged that during this period he used an arcing machine, which abraded brake linings by means of sand paper moving at high speeds. Sherman alleged the machine released asbestos dust, which he then brought home, exposing his wife Debra Sherman to asbestos. Ms. Sherman developed mesothelioma and passed away from exposure to the asbestos dust carried home by her husband. Reprinted courtesy of Kristian B. Moriarty, R. Bryan Martin and Lee Marshall of Haight Brown & Bonesteel LLP Mr. Moriarty may be contacted at kmoriarty@hbblaw.com Mr. Martin may be contacted at bmartin@hbblaw.com Mr. Marshall may be contacted at lmarshall@hbblaw.com Read the court decision
Read the full story...
Reprinted courtesy of

Fixing the Problem – Not the Blame

November 30, 2016 — Curtis W. Martin – Peckar & Abramson, P.C. Bulletin
Who is responsible for defective design under Texas law? The contractor, under Lonergan? The owner, under Spearin? A recent Fifth Circuit decision suggests that in some cases this might be the wrong question when design responsibility is disputed. The appellate court recently remanded a case back to the district court to determine whether the contractor or owner breached an implied duty to cooperate in discovering defects in design and subsequently pricing the change required to correct the problem. Read the court decision
Read the full story...
Reprinted courtesy of Curtis W. Martin, Peckar & Abramson, P.C.
Mr. Martin may be contacted at cmartin@pecklaw.com

Big Changes and Trends in the Real Estate Industry

February 06, 2023 — Rachel Mihai - Bremer Whyte Brown & O'Meara LLP
In my practice, I am fortunate enough to attend a real estate conferences on a regular basis. And, without exception, we always get a run down on hot trends/cases from industry leaders. Some issues that are being attacked in hot cases/trends are:

Are the typical commission structures – e.g., the typical 5% to 6% divided in half – fair or creating an antitrust issue?
Is MLS commission anti-competitive and artificially inflates commission rates?
Can a buyer’s agent advertise/represent that it is working for its client for free, as generally happens and has been allowed?
What is the impact of agent only showing their clients houses with higher typical commissions, like 6%? And how is this being advertised, pushed for and manipulated contrary to the interests of consumers?

There are currently some big, national cases that will likely bring about big changes in the entire national real estate community with regard to how real estate brokers’/agents’ commissions are determined, explained and advertised. These cases revolve around antitrust and alleged conspiracy claims – asserting that the use of commissions in today real estate markets are creating an overcharging to consumers and artificially manipulation of the market. Read the court decision
Read the full story...
Reprinted courtesy of Rachel Mihai, Bremer Whyte Brown & O'Meara LLP
Ms. Mihai may be contacted at rmihai@bremerwhyte.com

Insurer Must Defend and Indemnify Construction Defect Claims Under Iowa Law

February 23, 2017 — Tred R. Eyerly – Insurance Law Hawaii
Applying Iowa law, the federal district court found that the insurer had to defend and indemnify construction defect claims for damage to property caused by the insured's subcontractors. Van Der Weide v. Cincinnati Ins., 2017 U.S. Dist. LEXIS 4469 (N.D. Iowa Jan. 12, 2017). Van Der Weide contracted with Bouma & Company, Inc. to construct a house in 1996. Before construction began, Bouma purchased a CGL policy and a separate umbrella policy from Cincinnati, which were in effect from January 30, 1996 to January 30, 1999. Bouma used various subcontractors to build the home, including Elkato Masonry, which did the brick veneer and masonry work. The house was completed in February 1998 and Van Der Weide moved in during August 1998. Read the court decision
Read the full story...
Reprinted courtesy of Tred R. Eyerly, Insurance Law Hawaii
Mr. Eyerly may be contacted at te@hawaiilawyer.com

The G2G Year in Review: 2019

February 03, 2020 — Pillsbury's Construction & Real Estate Law Team - Gravel2Gavel Construction & Real Estate Law Blog
As we kick off the new decade, we wanted to share the top five most-read articles of 2019 from Gravel2Gavel. The most-read blog posts covered 2019 real estate and construction industry trends ranging from affordable housing to the new State Bill 35 (SB 35) to sustainability in modern real estate. Our posts provided deep insight and detailed case studies, and summarized hot topics that addressed the legal implications and exciting disruptions that are affecting the industry. We hope you enjoy the roundup:

Assessing SB 35—Success or Failure? by Robert Howard, Alexander Walker and Matt Olhausen Robert, Alex and Matt examined the newly implemented SB 35 and highlighted real examples of SB 35 in action.
Update Your California Release Provisions to Include Amended Section 1542 Language by William S. Hale, P.E. Bill Hale encouraged readers to update their California release provisions to include Amended Section 1542 Language, which ensures that the releasing party is consciously releasing both known and unknown claims that may be later discovered.

Read the court decision
Read the full story...
Reprinted courtesy of Pillsbury's Construction & Real Estate Law Team

Public Works Bid Protests – Who Is Responsible? Who Is Responsive?

December 14, 2020 — Eric Divine - Porter Law Group
Most Public Works Solicitations Are Low Bid The process for awarding public works projects in California is controlled by the Public Contract Code. Generally, regardless of whether the public agency is the State, a county, a city or a local district, the project is awarded to the contractor who is “responsible” and submits the least expensive “responsive” bid. This is generally known as a “low bid” contract. In the context of public works, the terms responsible and responsive have very important meanings. As a result, State and local governments have gotten into very expensive trouble for not following the law. So, to understand how to best present a bid protest on a low bid solicitation, you, as a contractor should have a good understanding of the meaning of these terms. Note: There are other methods of contracting for public works that are not low bid, which are typically called “best value” contracts because the procurement process considers factors other than just price. These methods are typically used for large projects because the added complexity and expense of the procurement process only makes sense when the project is itself complex and expensive. Read the court decision
Read the full story...
Reprinted courtesy of Eric Divine, Porter Law Group
Mr. Divine may be contacted at edivine@porterlaw.com

Engineer and CNA Dispute Claim Over Dual 2014 Bridge Failures

December 15, 2016 — Scott Van Voorhis – Engineering News-Record
An engineering company whose error led to two pedestrian bridge collapses in North Carolina in 2014 that left one worker dead and caused costly damage contends it is being unfairly denied $2 million in potential insurance coverage by its carrier due to what it claims is an “ambiguous” wording of the policy. Read the court decision
Read the full story...
Reprinted courtesy of Scott Van Voorhis, Engineering News-Record
ENR may be contacted at ENR.com@bnpmedia.com

FAIRFIELD CONNECTICUT BUILDING EXPERT DIRECTORY AND CAPABILITIES