Fairfield Connecticut Building Expert Directory

NJ Condo Construction Defect Case Dismissed over Statute of Limitations

June 11, 2014 — Beverley BevenFlorez-CDJ STAFF
According to an article by Matthew D. Stockwell of the firm Pillsbury Winthrop Shaw Pittman, LLP published in Lexology, “a trial court in Bergen County, New Jersey dismissed a condominium association's construction defect claims against several construction entities for failure to comply with the applicable statute of limitations.” Stockwell stated that the “aftermath will be interesting to follow, because the trial court stripped away some of the protection that New Jersey's discovery rule affords to property owners who become aware of latent defects well after a project is substantially completed.” Read the court decision
Read the full story...
Reprinted courtesy of

Construction Lien Needs to Be Recorded Within 90 Days from Lienor’s Final Furnishing

March 22, 2018 — David Adelstein – Florida Construction Legal Updates

A lienor needs to record its construction lien within 90 days of its final furnishing date. This final furnishing date excludes punchlist, warranty, or the lienor’s own corrective work. A lien recorded outside of the 90-day window will be deemed invalid.

The opinion in In re: Jennerwein, 309 B.R. 385 (M.D. Fla. 2004) provides a good discussion of this 90-day window. This matter dealt with a debtor / owner’s bankruptcy where the owner was contesting the validity of a construction lien by its pool contractor. The owner contended that the lienor’s lien was recorded outside of this 90-day window thus rendering the lien invalid. The bankruptcy court was determining the validity of the lien.

In this matter, the owner hired a swimming pool contractor to construct a pool. On October 25, 2002, the pool contractor installed pavers around the pool. After this was performed, the pool contractor realized the owner was unable to obtain the financing to pay for the pool. As a result, the pool contractor ceased doing any more improvements. But, neither the pool contractor nor the owner terminated the contract. Then, on November 27, 2002, the pool contractor sent a supervisor to the property to inspect the pool (work-in-place), the pool equipment, the installed pavers, made a list of the unfinished work, and remove any debris. On January 27, 2003, the pool contractor recorded its lien.

Read the court decision
Read the full story...
Reprinted courtesy of David Adelstein, Florida Construction Legal Updates
Mr. Adelstein may be contacted at dadelstein@gmail.com

Zero-Energy Commercial Buildings Increase as Contractors Focus on Sustainability

February 10, 2020 — Jeffrey S. Wertman - Construction Executive
Imagine a functional, low energy commercial building that annually consumes only as much power as the building creates with on-site, clean, renewable resources. From coast to coast, there is considerable momentum for zero-energy (ZE) buildings, also known as ZEB’s or net-zero energy buildings (NZEBs). Although still an emerging market, the growth trend for ZEBs is steep. The world’s net-zero energy market for commercial and residential projects is expected to exceed $1.4 trillion by 2035. The number of ZEBs across North America has dramatically increased since 2010 which encompasses about 80 million square feet of commercial building space. ZE has captured the attention of building owners, developers, architects, engineers, contractors, designers, policymakers and others who see its potential to efficiently use clean energy resources to reduce the substantial carbon footprint of buildings. Real Applications of Net Zero From 2012 to 2019, the number of ZE projects has increased ten-fold. According to the “2019 Getting to Zero Project List” released in May 2019 by the New Buildings Institute, a nonprofit organization striving to achieve better energy performance in commercial buildings, the total number of certified, verified and emerging ZE projects grew to 607 in 2019. New projects continue to appear regularly. Today, hundreds of ZE buildings, including commercial buildings of all types (including retail, office, warehouse, hotel, educational and government) are being developed. Reprinted courtesy of Jeffrey S. Wertman, Construction Executive, a publication of Associated Builders and Contractors. All rights reserved. Read the court decision
Read the full story...
Reprinted courtesy of

Will Superusers Future-Proof the AEC Industry?

May 13, 2019 — Aarni Heiskanen - AEC Business
Design professionals who leverage tools and technology and, at the same time, have people skills, are essential to the future of the industry. They are Superusers, the protagonists of the latest book by Randy Deutsch. Randy Deutsch is an architect, educator, workshop leader, writer, and international keynote speaker. I had a chance to interview him about his book, Superusers: Design Technology Specialists and the Future of Practice. First, I was curious to know why he chose this topic for his fourth book. He explains: “Right now, it made a lot of sense to focus on the individual, not focus on collaboration and building teams, and really define what each individual team member should be.” Who Are Superusers? IT, technology, and tool specialists are typically experts in a relatively narrow field. Designers, especially architects, must have a wider perspective. Superusers are design technologists; liaisons between business needs and technology solutions. They demonstrate certain skillsets and mindsets. Read the court decision
Read the full story...
Reprinted courtesy of Aarni Heiskanen, AEC Business
Mr. Heiskanen may be contacted at aec-business@aepartners.fi

Third Circuit Limits Pennsylvania’s Kvaerner Decision; Unexpected and Unintended Injury May Constitute an “Occurrence” Under Pennsylvania Law

December 22, 2019 — Michael S. Levine & Michelle M. Spatz - Hunton Insurance Recovery Blog
The Third Circuit ruled on Friday that differing “occurrence” definitions can have materially different meanings in the context of whether product defect claims constitute an “occurrence” triggering coverage under general liability insurance policies. The Court held in Sapa Extrusions, Inc. v. Liberty Mutual Insurance Company, that product claims against Sapa may be covered under policies that define an “occurrence” as an accident resulting in bodily injury or property damage “neither expected nor intended from the standpoint of the insured.” However, the Court affirmed that coverage was not triggered under policies lacking the “expected” or “intended” limitation, reasoning that, under those policies, there was no question that the intentional manufacturing of Sapa’s product was too foreseeable to amount to an “accident.” The coverage dispute arose from an underlying action in which Marvin, a window manufacturer, alleged that, between 2000 and 2010, Sapa sold it roughly 28 million defective aluminum window extrusions. Marvin alleged that the extrusions, which are metal frames that hold glass window panes in place, began to oxidize and break down shortly after they were installed, causing Marvin to incur substantial costs to fix and replace them. Marvin sued Sapa in 2010 in Minnesota federal court, and the parties settled in 2013. Sapa sought coverage for the settlement from its eight general liability insurers for the period implicated by Marvin’s allegations. The insurers denied coverage and Sapa brought suit in the Middle District of Pennsylvania. Reprinted courtesy of Michael S. Levine, Hunton Andrews Kurth and Michelle M. Spatz, Hunton Andrews Kurth Mr. Levine may be contacted at mlevine@HuntonAK.com Ms. Spatz may be contacted at mspatz@HuntonAK.com Read the court decision
Read the full story...
Reprinted courtesy of

Construction Termination Issues for the Architect and Engineer: Part 1– Introduction to the Series

July 24, 2023 — Melissa Dewey Brumback - Construction Law in North Carolina
Earlier this year, I was asked to talk to other construction lawyers on the topic of termination. My first question was– whose termination are we talking about here– the architect / engineer? The contractor? Is someone wanting to “fire” the owner? The answer, as it turns out, is — yes. That is, yes, any and all of the above termination topics were on the table. As you may have suspected, even the threat of a termination is bad, bad news. It is the “nuclear option” for a construction project. Everyone risks getting harmed. As the design professional administering a contract, you run a risk of being dragged into litigation no matter what you do. So, how should you proceed? Carefully. Read the court decision
Read the full story...
Reprinted courtesy of Melissa Dewey Brumback, Ragsdale Liggett
Ms. Brumback may be contacted at mbrumback@rl-law.com

What ‘The Curse’ Gets Wrong About Passive House Architecture

April 02, 2024 — Teresa Xie - Bloomberg
In the fifth episode of Showtime’s The Curse, two potential buyers are touring a boutique house in Española, a soon-to-be gentrified Santa Fe neighborhood when one of them makes a remark about the temperature. “Sorry, can I get a water? It’s just really hot in here,” he says, airing out his sweat-stained shirt. The quirky home’s architect-slash-developer, played by Emma Stone, says, “Sure!” and without skipping a beat, continues to explain the virtues of her passive house design: The home functions like a thermos, with no need for air conditioning — unless any air escapes the house. Then it takes five to seven hours for the room to recover. Owning a passive house sounds like a nightmare, right? If you’re buying a one-of-a-kind, mirror-clad spec house from Stone and co-star Nathan Fielder, it may well be. On The Curse, the two play a do-gooder couple attempting to make an HGTV series (with Benny Safdie) about turning regular houses into carbon-neutral passive homes. Odd things happen to Stone and Fielder over the show’s first season: trouble with the laws of gravity, the trials of a failing marriage and a literal curse from a small child. But the weirdest might be the show’s portrayal of passive house design, an energy-efficient design standard that has been around since the 1970s. Passive building, which has its origins in Europe, relies on advanced construction methods to seal a structure in an airtight envelope, thereby reducing energy consumption for heating and cooling by as much as 75%. Read the court decision
Read the full story...
Reprinted courtesy of Teresa Xie, Bloomberg

Reminder About the Upcoming Mechanic’s Lien Form Change

August 26, 2019 — Christopher G. Hill - Construction Law Musings
As July 1, 2019 approaches with its inevitable changes to the Virginia Code, I wanted to remind you once again that the statutory form for a Virginia mechanic’s lien will change as of that date. HB2409 passed both houses of the General Assembly and has been signed by the Governor. This bill reconciled the language found in Virginia Code Sec. 43-4 with the various forms for general contractor, subcontractor and sub-subcontractor/supplier forms found in later sections of the code. As you will see if you download the .pdf of the bill as signed, this involved some tweaks to 43-4 and some updates to the mechanic’s lien forms that are in the code. The recent Desai case from the Virginia Supreme Court made it clear that such action was necessary. Read the court decision
Read the full story...
Reprinted courtesy of The Law Office of Christopher G. Hill
Mr. Hill may be contacted at chrisghill@constructionlawva.com

FAIRFIELD CONNECTICUT BUILDING EXPERT DIRECTORY AND CAPABILITIES