Wildfire Insurance Coverage Series, Part 5: Valuation of Loss, Sublimits, and Amount of Potential Recovery
July 25, 2022 —
Scott P. DeVries & Yosef Itkin - Hunton Insurance Recovery BlogInsurance policies provide different levels of insurance coverage and even if the amount purchased was adequate at one time, developments over time (e.g., inflation, upgrades, regulatory changes and surge pricing) may leave the policyholder underinsured. In this post in the Blog’s Wildfire Insurance Coverage Series, we emphasize the need for policyholders to take a close look at the policy’s terms to select the right type and amount of coverage for a potential loss.
Various types of coverage are available and there has been extensive litigation concerning the amount of coverage provided by one policy form or another. For example, the policyholder may have purchased market value coverage (the value of the house at the time of the wildfire), replacement coverage subject to a policy limits cap, guaranteed replacement cost coverage, or some variation on the theme. While the property may be properly valued when the insurance is purchased, it may become undervalued at the time of loss due to factors like inflation or home improvements that were not disclosed to the insurer. And, however generous the limits may be when the policy is procured, as one court discussed, it may be insufficient when “surge pricing” occurs after a wildfire.
[1]
Reprinted courtesy of
Scott P. DeVries, Hunton Andrews Kurth and
Yosef Itkin, Hunton Andrews Kurth
Mr. DeVries may be contacted at sdevries@HuntonAK.com
Mr. Itkin may be contacted at yitkin@HuntonAK.com
Read the court decisionRead the full story...Reprinted courtesy of
Micropiles for bad soil: a Tarheel victory
March 14, 2011 —
Melissa BrumbackDespite foundation challenges, construction is almost complete on the expansion at University of North Carolina’s Kenan stadium. The project started with a deep foundation system from design-build contractor GeoStructures. Known as the Carolina Student-Athlete Center for Excellence, the addition was built on a parcel with a knotty mix of fill soils, subsurface boulders and varying depths to rock. To achieve uniform foundation support, GeoStructures designed a Micropile system (also known as a Mini pile system) which could be drilled into the variable ground conditions.
Read the full story...
Reprinted courtesy of Melissa Brumback of Ragsdale Liggett PLLC. Ms. Brumback can be contacted at mbrumback@rl law.com.
Read the court decisionRead the full story...Reprinted courtesy of
Connecting Construction Project Information: Open Technology Databases Improve Project Communication, Collaboration and Visibility
March 14, 2018 —
Andy Kayhanfar - InEightThe construction industry has been plagued for decades with projects coming in over budget and behind schedule. There are many reasons this happens, but it ultimately comes down to just one thing – a lack of connected information.
Today, gigabytes and even terabytes of data are generated on a project and housed in different systems that do not talk or share information, which creates a closed approach and inhibits collaboration. Data is siloed and only accessible to certain companies, departments or disciplines, which gives each project stakeholder a very limited view into the status of the project as they are making decisions.
To be successful, the construction industry needs to free project data from closed systems. There must be a way to give all project stakeholders access to accurate information within the context of how it applies to the overall project that will empower everyone from owners to engineers to contractors to make timely, fully informed decisions that bring projects in on time and within budget.
INTRODUCING THE OPEN TECHNOLOGY DATABASE
The need for deep visibility into project information across systems and stakeholders has given rise in the construction industry to the open technology database. This approach enables project stakeholders to link the data in their existing software systems and connect that information into one centralized location. Project stakeholders can continue to use and maintain the data in their own systems while still feeding the information to the shared environment, which brings together critical project details, provides context for decisions and makes it easier for all parties to collaborate.
Project stakeholders are now able to connect business data related to estimating, cost control, scheduling, contracts, purchasing, accounting and more. This creates a common data set across the project that can be quickly accessed and can easily be put in the hands of project decision makers.
Innovative companies are taking this connectivity to a new level. They see the potential to use 3D models beyond simply the design aspects of a project and bring them into the activities of construction. Innovators are taking all the project information available in the shared environment and connecting it to the 3D model to create a comprehensive view of the project.
Read the court decisionRead the full story...Reprinted courtesy of
Andy Kayhanfar, Construction Executive, a Publication of Associated Builders and Contractors. All Rights Reserved
Changes To Commercial Item Contracting
May 29, 2023 —
Marcos R. Gonzalez - ConsensusDocsThe FAR Council has recently published two changes to commercial item contracting that clarify the definition of commercial services and simplify commercial item determinations (“CIDs”) for contracting officers (“COs”). Since the 1990s, the federal government has encouraged the purchase of commercial items to ease the regulatory burden on vendors who have not previously conducted federal business, encourage innovation, and lower prices[
1]. These different objectives (cost savings, broadening markets, innovation) often have corollary policies; for example, vendors who are not accustomed to the regulatory burdens of government business are encouraged to enter the market by being exempted from a slew of regulations (found in standard commercial items clause FAR 52.212-4). As a result, the regulations applicable to commercial item contracting are those required by statute and executive orders in addition to generic commercial terms that may be tailored due to potential variation in commercial terms.[
2]
Commercial Products v. Commercial Services
The first change, in effect since November 2021 pursuant to the 2019 National Defense Authorization (“NDAA”), split the old definition of “commercial item” into two separate definitions: “commercial product” and “commercial service.”[
3] We are now blessed with the following definitions of commercial products and services, respectively:
Commercial product means—
(1) A product, other than real property, that is of a type customarily used by the general public or by nongovernmental entities for purposes other than governmental purposes, and–
(i) Has been sold, leased, or licensed to the general public; or
(ii) Has been offered for sale, lease, or license to the general public;
Reprinted courtesy of
Marcos R. Gonzalez, Peckar & Abramson, P.C.
Mr. Gonzalez may be contacted at mgonzalez@pecklaw.com
Read the court decisionRead the full story...Reprinted courtesy of
Home Buyer May Be Third Party Beneficiary of Property Policy
July 19, 2017 —
Tred R. Eyerly - Insurance Law HawaiiThe Oklahoma Supreme Court reversed the trial court's grant of summary judgment to the insurer, finding that the purchaser may have third party beneficiary rights under the seller's property policy. Hensley v. State Farm Fire & Cas. Co., 2017 Okla. LEXIS 59 (June 20, 2017).
In May 2000, Hensley sold his property and a mobile home located thereon to Douglas using a contract for deed. The contract for deed required Douglas to keep the premises insured, and the monthly payments made by Douglas to Hensley included the premiums. Hensley had a policy with State Farm on the property. Hensley continued to make the premium payments and the policy continued to be renewed. Further, State Farm was informed of the change in the property's status.
Read the court decisionRead the full story...Reprinted courtesy of
Tred R. Eyerly - Insurance Law HawaiiMr. Eyerly may be contacted at
te@hawaiilawyer.com
Construction Mediation Tips for Practitioners and 'Eyes Only' Tips for Construction Mediators
December 05, 2022 —
Stacy L. La Scala - Construction ExecutiveConstruction mediation can occur during or after construction and prior to or during arbitration or litigation. But, regardless of when a construction mediation occurs, its success often depends on the parties’ willingness to exchange critical information well in advance of the mediation session.
Tips for the Construction Practitioner
- Schedule a mandatory pre-session call.
A pre-session call with the mediator is the first and most effective opportunity to convey your client’s position and to allow the mediator to absorb and evaluate that information without distraction. On that call, counsel should describe the dispute and identify the decision-makers. Additionally, counsel should address the following questions:
- Are the parties working together and sharing information, or are they at war?
- Have the parties shared expert information?
- Have demands been published?
- Will the parties be publishing their briefs?
- What confidential information is not in the mediation brief?
- Will the decision-makers be participating? Are there any decision-makers who are not available or “behind the scenes”?
Reprinted courtesy of
Stacy L. La Scala, Construction Executive, a publication of Associated Builders and Contractors. All rights reserved.
Read the court decisionRead the full story...Reprinted courtesy of
Not If, But When: Newly Enacted Virginia Legislation Bans “Pay-If-Paid” Clauses In Construction Contracts
August 22, 2022 —
Joseph A. Figueroa & Thomas E. Minnis - ConsensusDocsRecently passed legislation in Virginia is likely to dramatically change contractual relationships between prime contractors and subcontractors in the Commonwealth. Abrogating well-established common-law principles set forth by the Supreme Court of Virginia, on April 27, 2022, the Virginia General Assembly, after receiving input from Virginia Governor Glenn Youngkin, passed Senate Bill 550 banning “pay-if-paid” clauses in public and private construction contracts. Contractors performing work in Virginia should take note of the new law, which goes into effect next year and will apply to any contracts executed after January 1, 2023.
The History Of Pay-if-Paid Clauses In Virginia
Broadly speaking, “pay-if-paid” clauses are a commonly used tool by prime contractors on construction projects to shift the risk to subcontractors in the event that the owner does not pay the prime contractor for work. Such clauses usually include language creating an express condition precedent to the subcontractor’s right to be paid for work under a subcontract, stating that the prime contractor shall be under no obligation to pay the subcontractor for work unless and until the prime contractor first receives payment for that work by the project owner. The “pay-if-paid” clause also has a less extreme cousin, the “pay-when-paid” clause, which merely delays the time in which the prime contractor is obligated to pay the subcontractor to the time in which the prime contractor is paid by the owner. It does not, however, extinguish the prime contractor’s ultimate obligation to pay the subcontractor.
Reprinted courtesy of
Joseph A. Figueroa, Watt, Tieder, Hoffar, & Fitzgerald, LLP (ConsensusDocs) and
Thomas E. Minnis, Watt, Tieder, Hoffar, & Fitzgerald, LLP (ConsensusDocs)
Mr. Figueroa may be contacted at jfigueroa@watttieder.com
Read the court decisionRead the full story...Reprinted courtesy of
Court Finds that Subcontractor Lacks Standing to Appeal Summary Judgment Order Simply Because Subcontractor “Might” Lose at Trial Due to Order
May 03, 2021 —
Garret Murai - California Construction Law BlogCases sometimes take unanticipated twists and turns. Atlas Construction Supply, Inc. v. Swinerton Builders, Case No. D076426 (January 26,2021), involving a tragic construction accident, a motion for summary judgment, a motion for good faith settlement, and a stipulated dismissal, is one of those cases.
The Accident
Swinerton Builders was the general contractor on a residential construction project in San Diego, California. Swinerton contracted with J.R. Construction, Inc. to perform concrete work and with Brewer Crane & Rigging, Inc. to perform crane work on the project. J.R. Construction in turn rented a concrete column formwork approximately 10 feet tall and weighing 300 to 400 pounds from Atlas Construction Supply, Inc.
One day on the construction project, Marcus Develasco, Sr. and another co-worker, employees of J.R. Construction, climbed to the top of the formwork to adjust its size. The formwork, which had been positioned on the site by Brewer, was upright but unsupported by braces. When the co-worker stepped off the formwork, Develasco’s weight caused the unsecured formwork to topple over, killing Develasco in the process.
Read the court decisionRead the full story...Reprinted courtesy of
Garret Murai, Nomos LLPMr. Murai may be contacted at
gmurai@nomosllp.com
