Bally's Secures Funding for $1.7B Chicago Casino and Hotel Project
August 12, 2024 —
Annemarie Mannion - Engineering News-RecordPlans for a $1.7-billion casino and adjacent 34-story hotel are advancing in Chicago as the gaming operator reports it has secured $940 million to complete funding for the project and has set demolition for a printing press building now occupying the site for this summer.
Reprinted courtesy of
Annemarie Mannion, Engineering News-Record
Ms. Mannion may be contacted at manniona@enr.com
Read the full story... Read the court decisionRead the full story...Reprinted courtesy of
Homeowners Sued for Failing to Disclose Defects
December 30, 2013 —
CDJ STAFFThe Madison-St. Clair Record reports that a Wisconsin homeowner has sued the former owners of her home, alleging that they failed to disclose a defect. According to the lawsuit, David and Doris Stephens informed Jennifer Davies that a basement window well had previously leaked, but that the problem had been fixed and not recurred in three years. Ms. Davies had problems with the leaks after she moved in.
And while the window was the only defect the Stepehenses reported, Ms. Davies found problems with the home’s heating and air conditioning as well. Though she paid only $112,000 for the home, Ms. Davies is suing for $400,000 for the repairs, loss of property value, and the court fees.
Read the court decisionRead the full story...Reprinted courtesy of
Construction Defect Claims Not Covered
May 10, 2022 —
Tred R. Eyerly - Insurance Law HawaiiThe court found that the insured's negligent acts causing damage to only the structure of the home it built were not covered under the CGL policy. Westfield Ins. Co. v. Zaremba Builders II LLC, 2022 U.S. Dist. LEXIS 36189 (N.D. Ill. March 2, 2022).
Zaremba contracted to build a house for the Vrdolyak Trust. After completion of the home, the occupants found many problems, including painting defects such as bubbling and peeling, leaving the basement full of water for months, causing damage to ductwork, framing and piping in the house, etc. The Trust sued and Westfield denied a defense.
Westfield filed a declaratory judgment action for a ruling that it had no duty to defend or indemnify. On Westfield's motion for summary judgment, the court determined there was no property damage. Property damage included "physical injury to tangible property." When the alleged damage occurred in the course of a construction project, tangible property had to be property outside the scope of the contract for project.
Read the court decisionRead the full story...Reprinted courtesy of
Tred R. Eyerly, Damon Key Leong Kupchak HastertMr. Eyerly may be contacted at
te@hawaiilawyer.com
7 Areas where Technology is Shifting the Construction Business
November 21, 2018 —
Eric Weisbrot – JW Surety BondsThe digital transformation of the last two decades has taken hold of the business environment in a powerful way. Companies in nearly all sectors are experiencing a significant shift in the way business is done, with a heavy focus on improved productivity, increase profitability, and enhanced product and service offerings. The construction industry has been historically slow to update its processes and business models in-line with other industries, but technology is currently making its long-awaited appearance in the sector. Construction professionals can embrace these new solutions to run more efficient businesses and keep a closer eye on profitability by reducing
common costs over time.
These are the seven major areas where technology is changing construction.
1 - Business Management
One of the most apparent shifts taking place in the construction industry thanks to technology is the advancement of business processes and systems behind the scenes. Construction managers and job site owners have countless
digital tools at their fingertips to help with managing all aspects of the business. This includes more efficient ways to manage material use and equipment inventory, logging subcontractor hours and pay, and maintaining reporting requirements from regulatory perspectives. Many software solutions integrate with older, legacy systems, making this change an easy one for construction businesses across the board.
2 – Jobsite Productivity
Another area of transformation in construction is productivity on each job site. Technology has offered job owners and general contractors more efficient methods to keep track of project timelines as well as subcontractor progress from start to finish. The technology advancements in this arena come in the form of wearable devices that track work performed, as well as mobile devices that help keep the often mundane tasks necessary for a project’s success up to date and completed on time.
3 – Worker Safety
Although wearables are being utilized in several different ways in the construction business, these devices are making a significant difference in the safety of workers. From smart helmets to digitally enhanced eyewear, workers are alerted to potential hazards on the job that they otherwise could not identify. Similarly, augmented and virtual reality solutions are being used to train workers before they arrive at a job, preparing them for safety concerns well in advance. Even though most licensed and
bonded construction workers have appropriate training throughout their careers, the addition of these resources has the ability to further reduce the risks often associated with construction work.
4 – Surveying and Monitoring
Unmanned aerial vehicles, also known as
drones, are being used throughout construction. These digital tools are equipped with cameras to offer a bird’s eye view of a construction site to help with surveying and identifying potential hazards for workers. Drones also help with inspections throughout a project’s progression, offering some reduction in cost and improving efficiencies.
5 – Improved Materials
Technology is also playing a role in the materials used on job sites. The addition of 3D printing has proven beneficial for construction companies, as concrete composites, plastics, and other materials are being printed and used to create structures on-site. This offers a more cost-effective and accurate way to complete a project.
6 – Self-operating Equipment
Some technology firms are making waves in the construction industry because they are currently developing and implementing
autonomous equipment solutions. Heavy machinery, like excavators, bricklayers, and bulldozers, are already being used on construction sites to help ease the burden of the labor shortage in the industry. While these machines are not yet mainstream, the benefits they offer mean they are likely to become a staple in construction in the years to come.
7 – Big Data
Finally, technology is shifting the construction business by way of big data analytics. With the detailed information from new software solutions, wearable tech, and drones, construction site managers have more data than they have ever had. This influx of information offers a way to analyze job site progress, budgets, timelines, and efficiency for companies large and small.
Author:
Eric Weisbrot is the Chief Marketing Officer of
JW Surety Bonds. With years of experience in the surety industry under several different roles within the company, he is also a contributing author to the surety bond blog.
Read the court decisionRead the full story...Reprinted courtesy of
What You Need to Know About the Recently Enacted Infrastructure Bill
December 06, 2021 —
Garret Murai - California Construction Law BlogThis past week, President Biden signed the Infrastructure Investment and Jobs Act. The bill, commonly referred to as the Infrastructure Bill, provides for $1.2 trillion in spending over the next five years on the nation’s infrastructure and is one of two major legislative initiatives of the Biden Administration, the other being Biden’s $1.75 billion Build Back Better Bill focused on “soft” assets such money to fight climate change, for universal free preschool, for paid family and medical leave, etc.
While the Infrastructure Bill contains its fair share of pet projects, economists and historians generally agree that the Infrastructure Bill is the largest investment in the nation’s infrastructure since President Franklin D. Roosevelt’s “New Deal” in 1933.
Read the court decisionRead the full story...Reprinted courtesy of
Garret Murai, Nomos LLPMr. Murai may be contacted at
gmurai@nomosllp.com
It’s Time to Start Planning for Implementation of OSHA’s Silica Rule
May 03, 2017 —
Nathan Owens & Louis “Dutch” Schotemeyer – Newmeyer & Dillion LLPGetting a notification from OSHA that your company is being investigated for a health or safety violation is an unwanted disruption to your business that could lead to a hefty monetary fine. Worse yet, if your company is found to have committed multiple violations, OSHA may categorize your company as a severe violator, which makes you subject to follow-up inspections. In the last 6 years, OSHA has added 520 companies to the Severe Violator Enforcement Program - sixty percent of which are in the construction industry.
New OSHA regulations impacting the construction industry may result in more companies facing investigations and fines, or worse yet, laying off workers and unable to compete for new work. In 2013, OSHA proposed a new mandate to reduce silicosis in workers. The mandate, which was revised multiple times before being made final in March 2016, requires that employers ensure their workers are exposed to no more than 50 micrograms of crystalline silica in an eight hour period (down from the current standard of 250 micrograms). Under the new mandate, employers are also held to heightened reporting requirements, protective measures and medical testing for employees with extended exposure to silica.
In the construction industry alone, OSHA believes the new mandate will prevent 1,080 cases of silicosis and more than 560 deaths. Builder and trade groups believe the new mandate will result in the loss of tens of thousands of jobs and cost the building industry billions of dollars. The National Association of Home Builders estimates that the Silica Rule will cost homebuilders $1,500 per start. While the two sides mount their arguments and seek support, how to implement the rule and its long term feasibility are still contested questions.
Recognizing the challenges employers will have with the heightened requirements of the Silica Rule, OSHA just announced that enforcement is being delayed 90 days to develop additional guidance for implementation of the rule in the construction industry. The new start date for enforcement of the Silica Rule is September 23, 2017.*
Many in the industry are hoping the Trump administration repeals the Silica Rule like they have “blacklisting” and the Volks rule. However, until that happens, OSHA expects your company to implement processes to ensure compliance by the new start date.
*The Silica Rule was adopted by Cal/OSHA in August 2016 even though Cal/OSHA’s own silica standard had been in place since 2008. Cal/OSHA adopted the federal standard with the June 23, 2017 effective date; however; in an effort to synchronize with OSHA, Cal/OSHA recently announced that the effective date in California will also be September 23, 2017.
Nathan Owens is the Las Vegas Managing Partner of Newmeyer & Dillion, and represents businesses and individuals operating in a wide array of economic sectors including real estate, construction, insurance and health care in all stages of litigation in state and federal court. For questions related to the OSHA and the Silica Rule, you can reach him at Nathan.Owens@ndlf.com.
Louis “Dutch” Schotemeyer is an associate in Newmeyer & Dillion’s Newport Beach office. Dutch’s practice concentrates on the areas of business litigation, labor and employment law, and construction litigation. For questions related to OSHA or the Silica Rule, you can reach him at Dutch.Schotemeyer@ndlf.com
Read the court decisionRead the full story...Reprinted courtesy of
Natural Disasters’ Impact on Construction in the United States
December 14, 2020 —
Robert S. Peckar & Crystal T. Dang - Construction ExecutiveIn these times of easy and instant access to news from around the globe, the effects of major earthquakes in Indonesia and Mexico, cyclones in Southeast Asia, Tsunamis around the world, volcanoes in Europe in unexpected places and, of course, raging forest fires and hurricanes in the United States are frequently in the news. Accompanying each of these disasters are immediate threats to construction projects, both physical and those affecting the safety and health of personnel.
However, after the dust settles or the waters recede, myriad issues will become obstacles to the road to recovery for a contractor to navigate. In 2020 alone, the volume of strong storms and forest fires have focused so much attention on the impact of disasters. The purpose of this article is to provide guidelines in anticipation of disasters, for reviewing the impact of a disaster as it is happening, and developing a mitigation plan to limit losses.
Anticipating Disasters
The best time to prepare for a disaster on a project is before the project starts. Reviewing contract rights, insurance policies and company disaster response protocols while a category 3 hurricane is a day away is not a best practice. To avoid falling into that situation, a contractor should follow the following guidelines. Doing so facilitates proper action during the actual disaster itself and in the aftermath.
Reprinted courtesy of
Robert S. Peckar & Crystal T. Dang, Construction Executive, a publication of Associated Builders and Contractors. All rights reserved.
Mr. Peckar may be contacted at rpeckar@pecklaw.com
Ms. Dang may be contacted at cdang@pecklaw.com
Read the court decisionRead the full story...Reprinted courtesy of
Colorado Senate Committee Approves Construction Defect Bill
March 19, 2015 —
Jesse Howard Witt – Acerbic WittLate last night, the Colorado Senate Business, Labor, and Technology Committee voted to refer
SB 15-177 to the committee of the whole. The vote followed nearly seven hours of testimony from those in favor of construction defect legislation and those opposed.
As I have
previously discussed, the bill sponsors have argued that their measure will encourage the construction of more affordable housing by giving builders de facto immunity for claims of defective workmanship and property damage in common interest communities. The bill achieves this by establishing difficult voting and disclosure requirements for homeowner associations and requiring costly, private arbitration of any disputes that can overcome the procedural hurdles. During the recent hearing, proponents echoed these statements and testified that insulating homebuilders from claims would lower home prices and rents by increasing the supply of cheaply-built condominiums.
Opponents questioned whether the bill contained any provisions that would actually help the affordable housing market. They also argued that it was improper for the legislature to shift the cost of fixing construction defects onto those homeowners who can least afford to pay for necessary repairs.
Read the court decisionRead the full story...Reprinted courtesy of
Jesse Howard Witt, The Witt Law FirmMr. Witt welcomes comments at www.acerbicwitt.com
