Seattle Washington Building Expert Directory

Design-build Trends, Challenges and Risk Mitigation

August 26, 2019 — Bill Webb - Construction Executive
As the commercial construction industry continues to evolve and grow, design-build methodologies are becoming increasingly popular for their ability to speed completion rates, control costs and produce an overall more efficient process under the guidance of the design-build contractor (DBC). The Design-Build Institute of America (DBIA) predicts that “over half of owners have already or will use design-build in the next five years” due to the opportunities it provides for innovation and fast-tracking projects. The organization also expects that design build methodologies will account for approximately 45% of all nonresidential construction spending over the 2018 – 2021 forecast period. Design-build provides many benefits to projects owners, however, holding contractual responsibility for both design and construction does accompany its fair share of challenges and risks for the DBC. Although basic risk management principles are inherent to design build through improved communication and collaboration, strong contractual language and proper insurance programs can greatly control risk exposures. Reprinted courtesy of Bill Webb, Construction Executive, a publication of Associated Builders and Contractors. All rights reserved. Read the court decision
Read the full story...
Reprinted courtesy of
Mr. Webb may be contacted at Bill.Webb@rtspecialty.com

Colorado Requires Builders to Accommodate High-Efficiency Devices in New Homes

December 14, 2020 — David M. McLain – Colorado Construction Litigation
Starting in 2009, the Colorado Legislature began adding requirements that builders offer certain options to accommodate high-efficiency devices. These requirements started with solar prewire options in 2009, then water-smart home options in 2010. In 2020, the Legislature added requirements for electric vehicle charging and heating systems. These sections apply to unoccupied homes serving as sales inventory or a model home or manufactured homes, as defined by Colorado law. While the Legislature has only required builders to include options to accommodate these devices, it may be just a matter of time until builders must install the prescribed devices themselves. In 2009, the Legislature passed C.R.S. 38-35.7-106, which was amended this year by HB 20-1155. As it now reads, Colorado law requires every builder of single-family detached residences to offer to have the home’s electrical or plumbing system, or both, include:

A residential photovoltaic solar generation system or a residential thermal system, or both;
Upgrades of wiring or plumbing, or both, planned by the builder to accommodate future installation of such systems; and
A chase or conduit, or both, constructed to allow ease of future installation of the necessary wiring or plumbing for such systems.

Read the court decision
Read the full story...
Reprinted courtesy of David McLain, Higgins, Hopkins, McLain & Roswell
Mr. McLain may be contacted at mclain@hhmrlaw.com

Engineer at Flint Negligence Trial Details Government Water Errors

April 04, 2022 — Richard Korman & Jeff Yoders - Engineering News-Record
Warren Green, vice president and chief engineer of Lockwood, Andrews & Newnam, an engineering consultant to Flint, Mich. during its disastrous water crisis of 2014 and 2015, testified in federal court last week that city officials forged ahead to switch its source of drinking water without adequate water softening or testing after one municipal manager assured him that the more extensive testing would be done. Reprinted courtesy of Richard Korman, Engineering News-Record and Jeff Yoders, Engineering News-Record Mr. Korman may be contacted at kormanr@enr.com Mr. Yoders may be contacted at yodersj@enr.com Read the full story... Read the court decision
Read the full story...
Reprinted courtesy of

Virginia General Assembly Tweaks Pay-if-Paid Ban

April 03, 2023 — Christopher G. Hill - Construction Law Musings
Last year, the Virginia General Assembly passed into law a ban on the so-called pay-if-paid clauses, effective January 1, 2023. I shared my thoughts and concerns with the legislation as drafted at the time of its passage. During this most recent legislative session, and among some other construction-related bills, the General Assembly sought to clarify its past enactment. The enrolled bill fills in certain gaps in the law as follows:

For both private and public contracts, the General Contractor, if it has good reason to withhold any payment, now has a maximum of 50 days from receipt of a proper invoice to notify its subcontractor of the reason for the withholding, including the contractual noncompliance, the amount to be withheld, and the lower-tier subcontractor responsible for the contractual noncompliance.
For private contracts, the Owner now has 45 days in which to provide any written notice of intention to withhold payment. This notice must include the specific contractual non-compliance and the dollar amount to be withheld. NB- Owners do not need to specify the subcontractor responsible for the non-compliance.

Read the court decision
Read the full story...
Reprinted courtesy of The Law Office of Christopher G. Hill
Mr. Hill may be contacted at chrisghill@constructionlawva.com

Changes in the Law on Lien Waivers

November 16, 2020 — Alan Paulk - Autry, Hall & Cook, LLP
Among many things to look forward to in 2021, we can add a new lien law to the list. Effective January 1, 2021, Georgia’s Lien Statute will be modified so that lien waivers and releases are limited to “waivers and releases of lien and labor or material bond rights and shall not be deemed to affect any other rights or remedies of the claimant.” O.C.G.A. 44-14-366(a). This would mean that lien waivers only waive lien or bond rights and do not waive contractual rights to collect payment. The new law is in reaction to a decision from the Georgia Court of Appeals in ALA Constr. Servs., LLC v. Controlled Access, Inc., 351 Ga. App. 841 (2019). In that case, a contractor signed an interim lien waiver at the time it submitted an invoice. The contractor did not receive payment, and it failed to timely record an affidavit of non-payment or a claim of lien. Subsequently, the contractor filed suit for breach of contract. The Georgia Court of Appeals held that the statutory form lien waiver was binding against the parties “for all purposes” and not just the purpose of preserving the right to file a lien. By such sweeping logic, the contractor’s breach of contract claim was denied. Read the court decision
Read the full story...
Reprinted courtesy of Alan Paulk, Autry, Hall & Cook, LLP
Mr. Paulk may be contacted at paulk@ahclaw.com

Veterans Day – Thank You for Your Service

December 05, 2022 — Travis Colburn - Ahlers Cressman & Sleight
Happy Veterans Day[1] to our country’s servicemembers past and present! ACS would like to express its deepest gratitude and respect in saying thank you to those that have served, or are serving, in our armed forces. It undoubtedly takes incredible bravery, fortitude, integrity, respect, and a commitment to our country’s evolving ideals. Some of those same attributes that are necessary for service are also well-geared toward a post-military career in construction. As some already know, Veterans have unique construction contracting opportunities at both the state and federal level. The following is a high-level overview of the process and opportunities for veterans who are not aware or who are considering a career in construction. There are federal and state level opportunities for Veteran-owned businesses. The initial step in accessing federal and state level contracting opportunities is different for each but begins with certification/verification. At the federal level, effective January 1, 2023, all responsibilities for the verification of Veteran-owned small businesses (“ VSOB”) will transfer from the Department of Veterans Affairs to the Small Business Administration.[2] Verification is the process that establishes eligibility for access to Veteran-specific benefits, including certain government contracts and the purchase of surplus government property, by confirming that VSOBs and service-disabled Veteran-owned small businesses (“SDVOSB”) are operated by Veterans.[3] Read the court decision
Read the full story...
Reprinted courtesy of Travis Colburn, Ahlers Cressman & Sleight
Mr. Colburn may be contacted at travis.colburn@acslawyers.com

Economic Loss Doctrine Bars Negligence Claim Against Building Company Owner, Individually

October 20, 2016 — Michael L. DeBona – The Subrogation Strategist
In Beaufort Builders, Inc. v. White Plains Church Ministries, Inc., 783 S.E.2d 35 (N.C. Ct. App. 2016), the Court of Appeals of North Carolina addressed whether the economic loss rule barred the negligence claim of White Plains Church Ministries, Inc. (White Plains) against Charles F. Cherry (Cherry), the owner of Beaufort Builders, Inc. (Beaufort Builders). The court held that, because the economic loss rule would bar White Plains’ negligence claims against Beaufort Builders, White Plains could not pursue a third-party negligence claim against Cherry, individually. Read the court decision
Read the full story...
Reprinted courtesy of Michael L. DeBona, White and Williams LLP
Mr. DeBona may be contacted at debonam@whiteandwilliams.com

Manufacturer of Asbestos-Free Product May Still Be Liable for Asbestos Related Injuries

July 30, 2015 — Kristian B. Moriarty, R. Bryan Martin and Lee Marshall – Haight Brown & Bonesteel LLP
In Sherman v. Hennessy Industries, Inc. (No. B252566, filed June 18, 2015), the Court of Appeal, Second District, reversed a trial court’s grant of summary judgment in favor of a manufacturer of a brake grinding machine. The Court cited an exception to the general rule that manufacturers may not be held liable, under a strict products liability theory, where the plaintiff’s injuries arise from other products that are used in conjunction with the defendant’s product. Plaintiff and appellant, Michael Sherman, was an automobile mechanic from 1962 to 1977. Mr. Sherman alleged that during this period he used an arcing machine, which abraded brake linings by means of sand paper moving at high speeds. Sherman alleged the machine released asbestos dust, which he then brought home, exposing his wife Debra Sherman to asbestos. Ms. Sherman developed mesothelioma and passed away from exposure to the asbestos dust carried home by her husband. Reprinted courtesy of Kristian B. Moriarty, R. Bryan Martin and Lee Marshall of Haight Brown & Bonesteel LLP Mr. Moriarty may be contacted at kmoriarty@hbblaw.com Mr. Martin may be contacted at bmartin@hbblaw.com Mr. Marshall may be contacted at lmarshall@hbblaw.com Read the court decision
Read the full story...
Reprinted courtesy of

SEATTLE WASHINGTON BUILDING EXPERT DIRECTORY AND CAPABILITIES