Seattle Washington Building Expert Directory

Home insurance perks for green-friendly design (guest post)

February 04, 2014 — Melissa Dewey Brumback – Construction Law in North Carolina
Wondering how to get your residential clients to pony up more money for green design? Check out today’s guest post by Carrie Van Brunt-Wiley and Katherine Wood. They are writers for the Homeowners’ Insurance Blog, which serves as a resource center for insurance consumers and homebuyers across the country. The U.S. Green Building Council’s new LEEDv4 standards present challenges for contractors, engineers, and architects – the restrictions in many cases are more stringent. There is, however an added bonus to remaining on the sustainable-building track: it’s more marketable than you think. That’s because green homes don’t just appeal to buyers with environmental concerns any more. Now smart budgeters seek them out as well. Why? While it’s true that sustainable construction can cost about 2% more than conventional methods, McGraw-Hill’s Smart Market Report says it typically increases a building’s overall value by an average of 7.5% and improves the return on investment by 6.6%. Read the court decision
Read the full story...
Reprinted courtesy of Melissa Dewey Brumback, Construction Law in North Carolina
Ms. Brumback can be contacted at mbrumback@rl-law.com

Disruption: When Did It Start and Where Will It End?

June 25, 2019 — Brian Gallagher - Construction Executive
If change is the only constant—as was famously observed by a Greek philosopher circa 500 B.C.—then why single out some changes as “disruption”? Disruption is about more than just technology; it’s about more, even, than the rapid rollout and development of technology in the past couple of decades. The word disruption refers to processes or products that are fundamentally different from what is currently in use and that render unforeseen, large-scale changes. Early discussions of disruption (the term was coined by Harvard Business School professor Clayton M. Christensen in a 1995 Harvard Business Review article) compared incremental change in existing systems, which are usually supported by established corporations, to innovations that start out as something completely fresh, limited in their appeal and flawed in initial iterations. The construction industry was—and still is—late to adopt most technologies and late in experiencing overall disruption. It also lags behind other industries when it comes to efficiency and productivity. McKinsey reported that construction is one of the “least digitized industries in the world,” despite employing approximately 7% of the world’s working-age population and representing one of the world economy’s largest sectors. Disruption is likely to be fast approaching now, even for the construction industry. But its delay may confer the benefit of allowing construction companies to learn from other industries’ mistakes. Reprinted courtesy of Brian Gallagher, Construction Executive, a publication of Associated Builders and Contractors. All rights reserved. Read the court decision
Read the full story...
Reprinted courtesy of

“If It Walks Like A Duck . . .” – Expert Testimony Not Always Required In Realtor Malpractice Cases Where Alleged Breach Of Duty Can Be Easily Understood By Lay Persons

April 17, 2019 — David W. Evans & Renata L. Hoddinott - Haight Brown & Bonesteel LLP
In Ryan v. Real Estate of the Pacific, Inc., et al. (No. D072724, filed 2/26/19), the Fourth Appellate District reversed a trial court’s granting of summary judgment and finding that expert testimony is not required in a professional negligence action where the claimed acts or omissions are within the understanding of a lay person. Daniel and Patricia Ryan hired Defendants David Schroedl, David Schroedl & Associates, and Real Estate of the Pacific, Inc., doing business as Pacific Sotheby’s International Realty to list, market, and sell their property. During an open house, the Ryans’ neighbor informed Defendant David Schroedl that he planned significant construction on his own property which would impact the Ryans’ property including, but not limited to, building a large addition that would obstruct the property’s westerly ocean view. Schroedl never disclosed this information to the Ryans or to the subsequent purchasers of the Ryans’ property. The day after escrow closed, the new owners’ interior decorator spoke with that neighbor who again explained his extensive remodeling plans. Reprinted courtesy of David W. Evans, Haight Brown & Bonesteel LLP and Renata L. Hoddinott, Haight Brown & Bonesteel LLP Mr. Evans may be contacted at devans@hbblaw.com Ms. Hoddinott may be contacted at rhoddinott@hbblaw.com Read the court decision
Read the full story...
Reprinted courtesy of

Construction Lien Waiver Provisions Contractors Should Be Using

January 06, 2020 — Jason Lambert - Construction Executive
It is common in construction for a subcontractor or material supplier of any tier to be required to provide a lien waiver when receiving payment. But not all lien waivers are created equal. While at a minimum, a lien waiver, by definition, needs to include a release of liens, it can also include many other terms that can tie up loose ends or resolve potential problems before they begin. Additional Releases A typical lien release is going to release any liens and right to claim liens on the subject property. But a lien waiver can also include releases of any claims against surety bonds, other statutory rights or claims, and at its broadest, claims against the paying party. One example of a provision that could help accomplish this is a release of “any right arising from a payment bond that complies with a state or federal statute, any common law payment bond right, any claim for payment, and any rights under any similar ordinance, rule, or statute related to claim or payment rights.” Broad release language can also be used to effectively preclude any claims arising prior to the date of the release. Payment Representations and Warranties A typical lien release has no representations or warranties about payment to subcontractors or material suppliers of a lower tier. But contractors can include language requiring the company receiving payment to represent and warrant that all subcontractors of a lower tier have been paid or will be paid within a certain timeframe using the funds provided and that these are material representations and inducements into providing payment. On a related note, if the contract requires subcontractors to provide lien releases from lower tier subcontractors in addition to their own release when seeking payment, contractors can require the sub-subcontractor releases to include representations that they have been paid by the subcontractor to try and tie up payment loose ends all around. Reprinted courtesy of Jason Lambert, Construction Executive, a publication of Associated Builders and Contractors. All rights reserved. Read the court decision
Read the full story...
Reprinted courtesy of
Mr. Lambert may be contacted at jason.lambert@nelsonmullins.com

Building a Case: Document Management for Construction Litigation

October 07, 2019 — Robert A. Gallagher, Jane Fox Lehman, & Michael I. Frankel, Pepper Hamilton LLP - ConsensusDocs
Success in construction litigation often turns less on counsel’s ability to craft legal arguments and more on counsel’s ability to gather, master and present the often complex set of facts underlying the case. In construction matters, most of the key facts are found in documents: contract documents, drawings, plans and specifications, schedules, submittals, progress reports, daily logs, change orders, invoices and payment records. Nowadays, these documents will almost certainly be created, exchanged and stored electronically; many will never exist in hard copy. As such, timely collection, organization and analysis of electronically stored information (ESI) is crucially important in construction litigation. The construction industry has always involved a large quantity of records. Today, the majority of those records exist only as ESI: Design professionals use computer-aided design (CAD) software to create construction plans. Construction managers use Primavera or similar software to create schedules and workflows. Estimators use job cost control programs. Innovative firms capture digital photos of the project, from mobilization through the punch process. Because ESI is created and exchanged at a higher rate than hard-copy documents, ESI has facilitated a dramatic increase in the volume of records associated with construction projects. Further compounding the increase is the proliferation of mobile devices. With a smartphone in every pocket, ESI creation has moved out of the home office and the site trailer and onto the site itself. As the volume of ESI expands, so too does the time and expense associated with storing, processing, reviewing and producing these records. This article will cover strategies for balancing time and expense with the requirements of the rules and the needs of the case. Reprinted courtesy of Pepper Hamilton LLP attorneys Robert A. Gallagher, Jane Fox Lehman and Michael I. Frankel Mr. Gallagher may be contacted at gallagherr@pepperlaw.com Ms. Lehman may be contacted at lehmanj@pepperlaw.com Mr. Frankel may be contacted at frankelm@pepperlaw.com Read the court decision
Read the full story...
Reprinted courtesy of

Billion-Dollar Power Lines Finally Inching Ahead to Help US Grids

April 03, 2023 — Brian Eckhouse, Naureen S Malik & Dave Merrill - Bloomberg
The biggest impediment to the US achieving a cleaner power grid isn't climate deniers or fossil-fuel lobbies; it’s a lack of transmission lines. The country badly needs more conduits to cart wind and solar energy and hydropower to cities. For more than a decade, multibillion-dollar power-line projects have struggled to advance, slowed or halted by bureaucracy, NIMBYism or general industry stasis. Now suddenly, several are progressing — and with them the prospect of newly unleashed clean energy as well as more resilient grids in the face of ever-dangerous storms and extreme heatwaves. There’s SunZia in the Southwest, TransWest Express in the Mountain West, Grain Belt Express to the Midwest, and Champlain Hudson Power Express into New York City — projects that together will cost at least $13 billion. Some are now ordering expensive equipment, a signal of their advancement. SunZia and TransWest expect to begin construction this year. Reprinted courtesy of Brian Eckhouse, Bloomberg, Naureen S Malik, Bloomberg and Dave Merrill, Bloomberg Read the court decision
Read the full story...
Reprinted courtesy of

Lake Charles Tower’s Window Damage Perplexes Engineers

October 05, 2020 — Autumn Cafiero Giusti - Engineering News-Record
When Hurricane Laura came onshore Aug. 27 as a Category 4 hurricane with sustained winds of 150 mph, it shattered windows on nearly every level of the 22-story Capital One Tower in the Lake Charles, La., business district. The glass damage is perplexing to engineers who study wind dynamics and window performance. Reprinted courtesy of Autumn Cafiero Giusti, Engineering News-Record ENR may be contacted at ENR.com@bnpmedia.com Read the full story... Read the court decision
Read the full story...
Reprinted courtesy of

What Does “Mold Resistant” Really Mean?

December 21, 2016 — Duane Craig – Construction Informer
Mold resistant building products offer to reduce the long term risks builders and architects face, but it’s important to know how companies verify their products are truly mold resistant. Here’s the deep story. It may come as a surprise to many but we live in a world that is infested with mold. Some sources put the number of species of mold, or fungi, at three hundred thousand or more. Most of these fungi spend their time doing useful things like breaking down complex substances into simpler compounds. For example the single-celled forms of fungi, called yeast, make bread, beer, and wine possible. Even most of the multi-celled, or hyphae molds, serve the planet by decomposing organic matter so it can be recycled and reused by other life forms on earth. Outdoor Mold Dominates The built environment definitely has its share of mold. But new research has found that most of the mold occurring inside is actually of the outdoor variety. In “The Diversity and Distribution of Fungi on Residential Surfaces” study, Rachel I. Adams and researchers “sampled fungi from three surface types likely to support growth and therefore possible contributors of fungi to indoor air: drains in kitchens and bathrooms, sills beneath condensation-prone windows, and skin of human inhabitants. ” They took the samples at a university housing complex that didn’t have any mold problems. Read the court decision
Read the full story...
Reprinted courtesy of Duane Craig, Construction Informer
Mr. Craig may be contacted at dtcraig@constructioninformer.com

SEATTLE WASHINGTON BUILDING EXPERT DIRECTORY AND CAPABILITIES