CGL Policies and the Professional Liabilities Exclusion
August 14, 2018 —
David Adelstein - Florida Construction Legal UpdatesCommercial general liability (CGL) policies for contractors traditionally contain a professional liabilities exclusion. This exclusion is generally added through a specific endorsement to eliminate coverage for professional services. Read the endorsement The point of the exclusion, in a nutshell, is simply to eliminate a CGL policy for a contractor serving as a professional liability policy.
Contractors need to appreciate a professional liabilities exclusion added through endorsement because oftentimes there are delegated design components they are responsible for. Perhaps the contractor value engineered a system and is responsible for engineering and signing and sealing the engineered documents (through its subcontractor) associated with that system. Perhaps there is a performance specification that requires the contractor to engineer a system. Perhaps there is a design-build component. Regardless of the circumstance, this professional liabilities exclusion can certainly come into play, particularly if a defect is raised with the design or professional services associated with the engineered system.
Read the court decisionRead the full story...Reprinted courtesy of
David Adelstein, Kirwin NorrisMr. Adelstein may be contacted at
dma@kirwinnorris.com
60-Mile-Long Drone Inspection Flight Points to the Future
January 15, 2019 —
Tom Sawyer - Engineering News-RecordBlack & Veatch announced in December the successful conclusion of a 60-mile-log, non-stop, proof-of-concept drone-based inspection flight conducted by a remote pilot in a command center miles away in rural Illinois.
Read the court decisionRead the full story...Reprinted courtesy of
Tom Sawyer, ENRMr. Sawyer may be contacted at
sawyert@enr.com
Define the Forum and Scope of Recovery in Contract Disputes
March 02, 2020 —
Phillip L. Sampson Jr. & Richard F. Whiteley - Construction ExecutivePrivate and public companies spend billions of dollars every year on construction projects. For these projects, time is money, and incorporating the most advantageous legal terms in the construction contract can minimize the number and extent of disputes, and ultimately save money.
It is important to remember that the provisions in construction contracts are negotiable. In a common scenario, the contractor and owner informally agree to the scope of a construction project and its cost. When it is time to reduce the deal to writing, the contractor and owner decide to use an AIA contract that appears to be a standard form. The document looks to be on point, and the parties simply need to fill in a few blanks with the cost and scope-specific information. Presuming that the AIA provisions are mutually protective and beneficial, the parties do not think about altering the “standard” terms. They sign the contract, and the project begins.
Months later, the owner and contractor end up disputing delays on the project, entitlement to various payments, and whether certain aspects of the work are defective. At this point, the parties realize that some of the contract’s terms could have been drafted a bit more favorably—but by that time it’s too late. So remember, construction contracts are negotiable, even provisions within “standard” AIA contracts.
Reprinted courtesy of
Phillip L. Sampson Jr. and Richard F. Whiteley, Construction Executive, a publication of Associated Builders and Contractors. All rights reserved.
Mr. Sampson may be contacted at phillip.sampson@bracewell.com.
Mr. Whiteley may be contacted at richard.whiteley@bracewell.com.
Read the court decisionRead the full story...Reprinted courtesy of
Application of Set-Off When a Defendant Settles in Multiparty Construction Dispute
January 05, 2017 —
David Adelstein – Florida Construction Legal UpdatesThe defense of set-off is an important defense in construction disputes, particularly multiparty disputes. For more information on this defense, please check out this
article as it explains the application of set-off in civil disputes in detail.
The issue of set-off will come up in a multiparty dispute when a plaintiff settles with one or more of the defendants. The remaining defendant(s) wants the benefit of that settlement to set-off and reduce any judgment against it. An example of this scenario can be found in Escadote I Corp. v. Ocean Three Limited Partnership, 42 Fla. L. Weekly D23a (Fla. 3d DCA 2016).
In this case, an owner of a condominium unit sued the condominium association, the developer, and the general contractor for water intrusion and mold infestation. The claim against the condominium association was the only claim that entitled the owner to attorney’s fees pursuant to its lawsuit (thus, attorney’s fees were isolated to only that claim against the association). During trial, the owner settled with the association. In entering a settlement, the owner smartly allocated the settlement amount such that $500 was allocated to its principal damages and $374,500 was allocated to its attorney’s fees. The owner then obtained a jury verdict against the contractor and developer for approximately $2M, jointly and severally, and the contractor and developer wanted the entire $375,000 settlement amount with the association to be set-off from the $2M verdict. The trial court set-off the entire $375,000 from the jury verdict when entering judgment. The appellate court reversed.
Read the court decisionRead the full story...Reprinted courtesy of
David Adelstein, Florida Construction Legal UpdatesMr. Adelstein may be contacted at
dma@katzbarron.com
Agrihoods: The Best of Both Worlds
July 23, 2014 —
Beverley BevenFlorez-CDJ STAFFSmithsonian Magazine reported on a new U.S. trend of blending farms and housing developments: The concept is called Development Supported Agriculture (DSA), or more commonly known as “Agrihoods.” In a DSA, “consumers pledge money or resources to support a farm operation, and in turn, receive a share of what it produces, but take the concept one step further by integrating the farm within residential developments.” Residents receive similar perks of being a part of a home owner association such as supported pools, tennis courts, and playgrounds through their contribution to the farm.
The first DSA, Prairie Crossing, was built in Grayslake, Illinois to preserve land while adding about 350 residential homes. Willowsford, a new DSA being built in Ashburn Virginia, will have over 2,000 homes.
Willowsford’s developers have preserved 2,000 acres, with 300 acres of farmland. The development will be broken into four villages, and each will have its own farm.
Part of the popularity of DSAs is that they may “require less of an investment than other green space communities—for instance, communities planned around golf courses,” according to Smithsonian Magazine. “What does it cost to leave the open space alone in the first place? Almost nothing,” said Ed McMahon, the Charles E. Fraser chair on sustainable development and environmental policy at the Urban Land Institute, as quoted by Smithsonian Magazine. “A light bulb went off in the mind of savvy developers who said, ‘Jeez, I can build a golf course development without the golf course.’ So that led to designing communities around other green-space amenities such as a farm.”
Read the court decisionRead the full story...Reprinted courtesy of
Judge Halts Sale of Brazilian Plywood
June 06, 2022 —
Beverley BevenFlorez – CDJ StaffA permanent injunction was issued by Judge Roy Altman in a Ft. Lauderdale federal court on May 24th that requires the revocation of all PS 1 certificates that were issued by PFS-TECO to more than a dozen Brazilian mills that produced structural plywood for the U.S. market,
reported Business Wire.
“This case highlights how a few bad actors profited by essentially looking the other way while substandard, and potentially dangerous plywood was imported into the U.S. and used to build homes and businesses,”
Michael Haglund, counsel representing the U.S. Structural Plywood Integrity Coalition, of Haglund Kelley, LLP, told Business Wire.
Building codes throughout the U.S. require the use of PS 1 structural plywood in construction. "If product standards are not being met, there can be serious implications for all homes constructed using those substandard wood panel products," Tyler Freres, VP of Sales for
Freres Engineered Wood, told CDJ. "Contractors and homeowners should be able to trust that U.S. certification agencies are doing their due diligence to accurately inspect panels, ensuring consumers' health and safety."
The U.S. Structural Plywood Integrity Coalition, including nine family-owned U.S. plywood manufacturers, alleged that PFS-TECO falsely certified that plywood from Brazil met U.S. structural integrity requirements. This substandard plywood has been used throughout the U.S. In particular, it was used during the hurricane reconstruction efforts in Florida and Puerto Rico due to its cheaper price. In 2021, Brazilian plywood made up 11% of the U.S. supply with
nearly 1.2 billion square feet sold.
Read the court decisionRead the full story...Reprinted courtesy of
The Golden State Commits to Going Green – Why Contractors Will be in High Demand to Build the State’s Infrastructure
November 28, 2018 —
Karla Pascarella & Alexa Magrath - Peckar & Abramson, P.C.On September 10, 2018 California’s Governor took an ambitious stance on environmental policy and signed Senate Bill 100 (“SB100”). The bill accelerates several Renewables Portfolio Standards (“RPS”) deadlines previously established by former Governor Arnold Schwarzenegger. The bill’s most notable effect—it requires that 100 percent of California’s electricity come from renewable and zero-carbon sources by 2045. California is the second state in the nation to pass such legislation; Hawaii passed a similar bill in 2015.
The passage of this bill could not be timelier as wildfires, drought, and record high temperatures continue to make national headlines. California, as it often does, has taken a contrarian position as the federal government attempts to reinvigorate the coal mining industry in America. Coal and other fossil fuels used to produce energy increase air pollution and deplete necessary ozone. California has been experimenting and utilizing renewable energy technology since as early as 1997. According to the California Energy Commission, by the end of 2017 California generated approximately 32 percent of its energy from renewable sources.
Reprinted courtesy of
Karla Pascarella, Peckar & Abramson, P.C. and
Alexa Magrath, Peckar & Abramson, P.C.
Ms. Pascarella may be contacted at kpascarella@pecklaw.com
Ms. Magrath may be contacted at amagrath@pecklaw.com
Read the court decisionRead the full story...Reprinted courtesy of
NLRB Finalizes Rule for Construction Industry Unions to Obtain Majority Support Representational Status
September 23, 2024 —
Aaron C. Schlesinger - Peckar & Abramson, P.C.On July 26, 2024, the National Labor Relations Board (“NLRB”) issued its Fair Choice – Employee Voice Final Rule (“Final Rule”), which takes effect September 30, 2024. The Final Rule eases the process for unions in the construction industry to convert their status as collective bargaining representative of bargaining unit employees from Section 8(f) to 9(a) of the National Labor Relations Act (“Act”) simply by placing certain recognitional acceptance language in their collective bargaining agreements. As a result, construction industry employers should review their collective bargaining agreements prior to signing to determine if such language exists.
Section 9(a) Non-Construction Industry Employers
In most industries, not including construction, union recognitional status as collective bargaining representative of the employer’s employees is governed by Section 9(a) of the Act. In order for a Union to obtain recognitional status under Section 9(a), the union must either: (1) file a petition with the NLRB showing support of 30% of the proposed bargaining unit via employee executed authorization cards and win an election of 51% of the employees in the proposed bargaining unit who actually vote; or (2) by reaching an agreement with the employer that the union possesses employee executed authorization cards from 51% of the proposed bargaining unit, which has been confirmed by a neutral arbitrator pursuant to a card count. Once such status is achieved, the union and employer are required to meet and bargain towards reaching a collective bargaining agreement covering the terms and conditions of employment of the union represented employees. A Section 9(a) union cannot have its recognitional status revoked absent the loss of majority support of the employees it represents.
Read the court decisionRead the full story...Reprinted courtesy of
Aaron C. Schlesinger, Peckar & Abramson, P.C.Mr. Schlesinger may be contacted at
aschlesinger@pecklaw.com
