Warranty of Workmanship and Habitability Cannot Be Disclaimed or Waived Under Any Circumstance
May 01, 2023 —
Jason Feld & Stephanie Wilson - Kahana & Feld LLPArizona residential construction and single-family home production is growing at a rapid pace. And just as fast as the homes are sold, homeowners are constantly seeking warranty repairs from their homebuilders. Despite having strong purchase documents with express warranty language, the Arizona Supreme Court in
Zambrano v. M & RC, II LLC, 254 Ariz. 53 (2022) adopted a bright line rule that regardless of the contract, the implied warranty of workmanship and habitability (“implied warranty”) cannot be disclaimed or waived under any circumstance. The Arizona Supreme Court opinion provides clear guidance of the law in this area on the scope of the implied warranty in contracts between homebuyers and builder/vendors, specifically on the issue of whether an express warranty can negate and effectively waive the common law implied warranty – which is a definitive violation of public policy.
The Zambrano decision involved a licensed real estate broker who bought a new single family home for herself in a newly constructed master planned community in Surprise, AZ. Zambrano entered into a valid sales contract with Scott Homes (homebuilder) which contained a stand-alone 45-page pre-printed form express warranty. The express warranty was to be the “only warranty applicable to the home.” The contract further clarified that the buyer was expressly disclaiming (and, thus, waiving) the implied warranty. The sales documents and express warranty were signed and authorized by Zambrano. A short time later, the home developed alleged “design and construction defects” that were “either time barred or outside the coverage” of the express warranty. Zambrano filed suit for the alleged defects based on the implied warranty. Scott Homes filed summary judgment based on the Zambrano’s waiver and disclaimer of the implied warranty in the purchase agreement. The trial court granted summary judgment and the matter was appealed up to the Arizona Supreme Court.
Reprinted courtesy of
Jason Feld, Kahana & Feld LLP and
Stephanie Wilson, Kahana & Feld LLP
Mr. Feld may be contacted at jfeld@kahanafeld.com
Ms. Wilson may be contacted at swilson@kahanafeld.com
Read the court decisionRead the full story...Reprinted courtesy of
COVID-19 Vaccine Considerations for Employers in the Construction Industry
July 11, 2021 —
Maggie Spell - ConsensusDocs1. Can employers in the construction industry require employees to receive a COVID-19 vaccine as a condition of employment?
In short, it depends. Back in December 2020, the U.S. Equal Employment Opportunity Commission (EEOC) explained that, generally speaking (and under federal law), employers can require employees to receive the COVID-19 vaccine. However, there are a few caveats.
First, certain employees may need to be excused from a mandatory vaccination requirement as a reasonable accommodation unless it will present undue hardship. Under the Americans with Disabilities Act (ADA), employers must provide reasonable accommodations to employees with a covered disability that prevents them from receiving the vaccine. (Fact sheets for the COVID-19 vaccines include examples of some of the underlying medical conditions that may result in an accommodation request.) And under Title VII of the Civil Rights Act of 1964, employers are similarly required to provide reasonable accommodations to employees with sincerely held religious beliefs, practices, or observances that prevent them from getting the vaccine. Employers requiring the vaccination would be wise to consult with an experienced employment lawyer before denying an accommodation. Accommodation issues stemming from administration of the COVID-19 vaccine (and COVID-19 more generally) are likely to plague employers for a while, so getting ahead of this issue is key.
Read the court decisionRead the full story...Reprinted courtesy of
Maggie Spell, Jones Walker LLPMs. Spell may be contacted at
mspell@joneswalker.com
Colorado Court of Appeals Decides the Triple Crown Case
January 17, 2014 —
Berkeley W. Mann, Jr. – Higgins, Hopkins, McLain & Roswell, LLCIn an earlier blog post, I discussed the case of Triple Crown Observatory Village Assn., Inc. v. Village Homes of Colorado, Inc., et al (2013 WL 5761028) because it presented the rare case where the Colorado Court of Appeals accepted an interlocutory appeal. Notably, the interlocutory appeal resulted from dismissal of the HOA case in which the trial judge directed the parties to arbitrate in lieu of a jury trial, under the declaration of covenants, conditions, and restrictions that governed the community. The Court of Appeals decided the case on its merits on November 7, 2013, and its decision can be found at 2013 WL 6502659. (Note: this presently unpublished opinion may be subject to further appeal to the Colorado Supreme Court.)
The case resulted from an attempt by the HOA’s counsel to amend the mandatory arbitration provisions of the declarations before it filed suit. This amendment process took the form of soliciting signature votes of homeowners on a revocation resolution to repeal the specific provisions of the declarations that provided mandatory, binding arbitration as the sole remedy for disputes between the HOA and the developer and/or general contractor. The declarations required that 67% of homeowners vote in favor of amendment in order to modify the declarations.
Read the court decisionRead the full story...Reprinted courtesy of
Berkeley W. Mann, Jr., Higgins, Hopkins, McLain & Roswell, LLCMr. Mann may be reached at
mann@hhmrlaw.com
Design Professional Liens: A Blueprint
March 12, 2015 —
Garret Murai – California Construction Law BlogIf you work in the construction industry in California you’re likely familiar with
mechanics liens.
But there’s one other type of lien available on construction projects in California: The design professional lien.
So, here’s a blueprint of what you need to know.
What is a design professional lien?
A design professional lien, like a mechanics lien, creates a security interest in real property for services rendered by a design professional prior to commencement of construction. If the design professional is not paid, the design professional can file a lawsuit to foreclose on the design professional lien to have the property sold and the proceeds from the sale used to satisfy the amount of the design professional lien.
Read the court decisionRead the full story...Reprinted courtesy of
Garret Murai, Wendel Rosen Black & Dean LLPMr. Murai may be contacted at
gmurai@wendel.com
Previously Owned U.S. Home Sales Rise to Eight-Month High
July 23, 2014 —
Victoria Stilwell – BloombergSales (ETSLTOTL) of previously owned U.S. homes climbed in June to an eight-month high as more listings helped prices cool, luring buyers into the market.
Sales increased 2.6 percent to a 5.04 million annual rate last month, led by gains in all four U.S. regions, figures from the National Association of Realtors showed today in Washington. The median forecast of 78 economists surveyed by Bloomberg projected sales would rise to a 4.99 million rate. Prices advanced at the slowest pace since March 2012 and inventories rose to an almost two-year high.
Historically low interest rates and smaller price increases are helping bring homeownership within reach for more Americans. A pickup in employment opportunities that lead to faster wage growth would provide an added spark for a residential real-estate market that began to soften in the middle of 2013.
Read the court decisionRead the full story...Reprinted courtesy of
Victoria Stilwell, BloombergMs. Stilwell may be contacted at
vstilwell1@bloomberg.net
New Mexico Adopts Right to Repair Act
April 25, 2023 —
William L. Doerler - The Subrogation StrategistOn April 7, 2023, New Mexico’s governor, Michelle Lujan Grisham, signed into law New Mexico’s Right to Repair Act (Act), 2023 N.M. SB 50. The Act’s effective date is July 1, 2023. The Act applies to construction defects in dwellings, i.e., newly constructed single family housing units designed for residential use. The Act applies to not only newly constructed housing units but also to systems and other components and improvements that are part of the housing unit at the time of construction.
Pursuant to the Act, except for construction defect claims that involve an immediate threat to the life or safety of persons occupying the dwelling, that render the dwelling uninhabitable or in which the seller, after notice, refused to make a repair pursuant to any applicable express warranty, a purchaser must comply with the provisions of the Act before filing a complaint or pursing an alternative dispute mechanism related to a construction defect in the dwelling. A seller who receives a notice complying with the provisions of the Act must give notice to all construction professionals who may be responsible for the defect.
Read the court decisionRead the full story...Reprinted courtesy of
William L. Doerler, White and Williams LLPMr. Doerler may be contacted at
doerlerw@whiteandwilliams.com
Oregon Duty to Defend Triggered by Potential Timing of Damage
June 28, 2013 —
CDJ STAFFThe Oregon Supreme Court has concluded that if it is possible that damage could have occurred prior to the completion of the project, then the policies in effect at that time are triggered. John Green of Farella Braun + Martel LLP writes that “we have long argued that, since the duty to defend exists if there is any ‘potential’ of covered liability, there is a potential that damage happened before that project was completed, or at any time after completion, triggering all policies in that time frame.” The Oregon court concluded that if property damage could have happened during construction, the insuerer had a duty to defend and “the insured had no burden to establish any additional facts to support that potential.”
Read the court decisionRead the full story...Reprinted courtesy of
What if the "Your Work" Exclusion is Inapplicable? ISO Classification and Construction Defect Claims.
February 14, 2023 —
David Humphreys - Carson Law Group, PLLCThis article was first published by the National Association of Home Builders (NAHB) on their NAHBNow blog
One of the risks faced by a residential builder is that, following completion of construction, the homeowner may assert a claim against the builder for damage to the home caused by an alleged construction defect. One of the ways a builder manages the risk of such construction defect claims is by purchasing commercial general liability (“CGL”) insurance.
A builder’s CGL policy covers those sums the builder is legally obligated to pay as damages because of bodily injury or property damage caused by an “occurrence,” that is, damage that is accidental rather than being expected or intended by the builder, so long as the claim does not fall within any of the policy’s several “exclusions” from coverage.
When faced with a construction defect lawsuit, our builder clients are often surprised—and dismayed—when their CGL insurer denies coverage and refuses to defend the builder. However, builders shouldn’t take their insurer’s denial of coverage at face value. This article discusses a new argument we recently discovered that has been a game-changer for our builder clients who were denied coverage in construction defect cases.
Whether coverage exists always depends on the specific language of the particular CGL policy, and courts generally construe exclusions against insurers. This allows experienced coverage attorneys to, at times, successfully challenge declinations of coverage and, at a minimum, convince insurers to pay for the builder’s defense.
A typical CGL policy provides products-completed operations coverage, which is sought by businesses that face potential liability arising out of the products that they have sold or operations that they have completed. Products-completed operations coverage allows builders to obtain many years of coverage for a completed project. Over the years, insurers have added to their policies modifications and exclusions that limit their exposure for claims that fall under that coverage.
Exclusion (l) or the “your work” exclusion, will often exclude coverage for a latent defect claim against the builder. A standard “your work” exclusion provides:
This insurance does not apply to: . . . “[p]roperty damage” to “your work” arising out of it or any part of it and included in the “products-completed operations hazard.”
This “your work” and similar exclusions are designed to limit coverage for business risks that are within the contractor’s own control; e.g., a claim that the contractor caused damage to the contractor’s own work. These exclusions apply both to ongoing and completed projects, which can leave a builder unprotected from lawsuits for years after a project is completed.
However, builders who are classified on the declarations page with Code 91580 Contractors— Executive Supervisors or Executive Superintendents, may not be subject to the “your work” exclusion. 91580 is a common classification assigned to builders during insurance underwriting. This classification falls into what is referred to as “dagger class” or “plus sign class,” which indicates that Products and/or Completed Operations coverage is
included as part of and not separate from the Premises/Operations coverage (emphasis added).
It has been noted that dagger” and “plus sign” classifications create confusion because of the seeming contradiction between policy wording and coverage rules.* The CGL policy seems to expressly exclude products and/or completed operations losses for “dagger” or “plus sign” classes. In the definitions section we find the following:
“Products-completed operations hazard”: . . .b. Does not Include “bodily Injury” or “property damage” arising out of:. . . (3) Products or operations for which the classification, listed In the Declarations or in a policy schedule, states that products- completed operations are subject to the General Aggregate Limit.”
This apparent exclusionary language, however, must be read in conjunction with the Insurance Services Office’s (ISO) Rule 25.F.1.:
Rule 25. CLASSIFICATIONS
F. Symbols
1. Plus Sign
A plus sign when shown in the Premium Base column under General Liability insurance in the Classification Table - means that coverage for Products and/or Completed Operations is included in the Premises/Operations coverage at no additional premium charge. When this situation applies, the classification described in the policy schedule or Declarations must state that:
“Products-completed operations are subject to the General Aggregate Limit” to provide Products and/or Completed Operations coverage(s).
When read together then, the exclusionary wording in the policy definition removes any product or operation loss subject to the “dagger” or “plus sign” classification from the definition of Products Completed Operations Hazard. Under the dagger or plus sign classification of Rule 25, coverage for products and/or operations is included in the premises operations coverage. Consequently, a loss can no longer be defined as a product completed loss, and as a result it is no longer subject to the “your work” exclusion.
Recall that the standard “your work” exclusion quoted above excludes coverage for “property damage” to “your work” “arising out of it or any part of it
and included in the “products-completed operations hazard”.” Here, we emphasize “and” because the “your work” exclusion applies only to property damage that is also included in the “products-completed operations hazard.” Since property damage claims arising under “plus sign” classifications are expressly excluded from the “products-completed operations hazard” (they are included in the premises/operations coverage) the “your work” exclusion simply does not apply. This means that, if your CGL insurer denies your construction defect claim based on the “your work” exclusion, do what the title of this article suggests: Check your ISO classification! If 91580 “Executive Supervisors or Executive Superintendents” is listed on your Declarations page, you may be in luck.
This new ISO classification-based coverage argument will likely also apply to other exclusions and endorsements that CGL insurers routinely rely on in denying coverage in construction defect cases. We recently successfully challenged a coverage denial based on the following “prior work” exclusionary endorsement:
”This insurance does not apply to ‘your products’ or ‘your work’ completed prior to” a certain date listed in the endorsement. . .
“Specifically, this insurance does not apply to. . . “property damage”. . . included in the ‘products-completed operations hazard’ and arising out of. . . ‘your work’ performed by or on behalf of you prior to the date shown above.”
Again, this endorsement incorporates the “products-completed operations hazard,” which allowed us to successfully argue that the exclusion was inapplicable to a builder classified as a 91580 “Executive Supervisor or Executive Superintendent.”
To our knowledge, this new ISO classification-based coverage argument has not yet been addressed by a court. Our recent successes with it have concluded with favorable settlements for our clients. Accordingly, for now, the ISO classification-based argument is a powerful new tool to challenge denials of coverage in construction defect cases where the builder is classified under 91580 “Executive Supervisors or Executive Superintendents.”
David Humphreys is a Partner at Carson Law Group, PLLC, and has been representing construction contractors, subcontractors, and owners for more than two decades in Mississippi and throughout the Southeast.
*See “Dagger” or Plus Symbol Classes: What They Mean, Chris Boggs - Virtual University | “Dagger” or Plus Symbol Classes: What They Mean) (independentagent.com)
Read the court decisionRead the full story...Reprinted courtesy of
