A Word to the Wise about Construction Defects
October 10, 2013 —
CDJ STAFFA post on The Buckner Blog suggests that “construction defects” are the scariest words for architects, engineers, and contractors. With the possible outcomes of a damaged reputation and astronomical costs, it’s not a surprise. Further, builders are using techniques that “have yet to be tested in real application over time.” As a result, “whoever has the deepest pockets or the most to lose becomes the primary target.”
While a commercial general liability policy might pay for damage caused by a construction defect, the post notes that “it does not, however, cover the costs to remedy your work.” That cost could be “greater than the actual property damages incurred.”
The post recommends a combination of transferring risk and risk control In transferring risk, the builder uses “indemnification and hold harmless agreements as well as inditional insured requirements in their construction contracts.” They advise to “request coverage as an additional insured on a primary basis.”
And then there’s risk control. “Work only with architects, engineers and contactors who have good reputations and a track record of performance. Don’t cut corners.” By some careful planning, builders might “sleep better at night.”
Read the court decisionRead the full story...Reprinted courtesy of
BHA Attending the Construction Law Conference in San Antonio, TX
February 18, 2015 —
Beverley BevenFlorez-CDJ STAFFBert L. Howe & Associates, Inc. (BHA) is proud to be joining with the State Bar of Texas, Construction Law Section as a sponsor and exhibitor at the event, and is excited to announce that they will also be sponsoring a raffle for a $100 Nordstrom gift card to given away at the Conference. Just stop by the BHA booth, and drop your card in the bowl for a chance to win.
With offices in San Antonio and Houston, BHA offers the experience of over 20 years of service to carriers, defense counsel, and insurance professionals as designated experts in nearly 5,500 cases. BHA’s staff encompasses a broad range of licensed and credentialed experts in the areas of general contracting and specialty trades, as well as architects, civil and structural engineers, and has provided services on behalf of developers, general contractors and subcontractors across the state of Texas.
BHA’s experience covers the full range of construction defect litigation, including single and multi-family residential (including high-rise), institutional (schools, hospitals and government buildings), commercial, and industrial claims. BHA also specializes in coverage, exposure, and delay claim analysis.
Download the seminar brochure and register...
Read the court decisionRead the full story...Reprinted courtesy of
Consulting Firm Indicted and Charged with Falsifying Concrete Reports
August 17, 2011 —
CDJ STAFFThe New York Times reports that a company paid to inspect concrete at major public works projects in New York has been charged with falsifying results. They had been hired by the city three years ago after their predecessor was found to have falsified results.
According to the Times, investigators found nothing legitimate in nearly three thousand reports. The owner and five employees of American Standard Testing and Consulting Laboratories have been indicted on twenty-nine counts, including charges under New York’s racketeering law. Prison terms could be up to twenty-five years.
Prior to the city’s contract with American Standard, the city employed a firm called Testwell. Testwell was found in 2008 to have falsified its test results.
Read the full story…
Read the court decisionRead the full story...Reprinted courtesy of
Should CGL Insurer have Duty to Defend Insured During Chapter 558 Notice of Construction Defects Process???
September 01, 2016 —
David Adelstein – Florida Construction Legal UpdatesDoes a CGL insurer have a duty to defend its insured-contractor during Florida Statutes Chapter 558 notice of construction defects pre-suit process? This answer is currently undecided and will be up to the Florida Supreme Court to decide. (It is on appeal stemming from a federal district court saying that an insurer does not have a duty to defend its insured-contractor in the 558 process based on the definition of the word “suit” in the CGL policy.)
Why is this an important issue?
The 558 pre-suit notice of construction defects process is designed to facilitate an avenue for construction defect lawsuits to get resolved without having to file a lawsuit or, at least, have issues narrowed before a lawsuit needs to be filed. (Check here for a summary of the 558 process.) It requires pre-suit notifications so that implicated parties can become aware of the defects and have an opportunity to inspect the defects / damage, test the defects / damage, and respond to the notice of construction defects; it provides an avenue for beneficial pre-suit discovery. Through participating in the 558 process, the contractor and/or design professional (and those downstream from them) can: (i) offer to remedy the defect, (ii) settle the defect, whether through money or a combination of money and repairs, (iii) dispute the defect, or (iv) advise that available insurance proceeds will be determined by its liability insurer. See Fla. Stat. s. 558.004.
Read the court decisionRead the full story...Reprinted courtesy of
David M. Adelstein, Kirwin NorrisMr. Adelstein may be contacted at
dma@kirwinnorris.com
Insured's Claim for Replacement Cost Denied
December 02, 2015 —
Tred R. Eyerly – Insurance Law HawaiiThe Illinois Appellate Court affirmed the trial court's ruling that the insured was only entitled to the actual cost value of his loss, not the replacement cost. Lytle v. Country Mutual Ins. Co., 2015 Ill. App. LEXIS 756 (Sept. 30, 2015).
The insured's home was built around 1903. On June 21, 2011, the insured discovered damage to his home because of a severe storm. He made a claim with his insurer, Country Mutual.
The policy contained a depreciation holdback provision. The provision said the insurer would not pay more than the actual cash value until the actual repair or replacement was complete. If the insured elected to accept actual cash value, he would have one year from the date of the loss to repair or replace the damaged property and request the difference between the actual cash value and the replacement cost.
Read the court decisionRead the full story...Reprinted courtesy of
Tred R. Eyerly, Insurance Law HawaiiMr. Eyerly may be contacted at
te@hawaiilawyer.com
Janus v. AFSCME
July 18, 2018 —
Ryan Foltz – Gordon & Rees Construction Law BlogOn June 27, 2018, the Supreme Court of the United States issued its decision in Janus v. AFSCME1. By a 5-4 vote, SCOTUS ruled that public employee unions cannot require non-members to pay union dues, even if those employees are benefiting from the services provided by the union. 28 states already had “right-to-work” laws on the books, meaning that unions in those states were already precluded from collecting fees from non-union members. This ruling makes that ban a national standard.
Read the court decisionRead the full story...Reprinted courtesy of
Ryan Foltz, Gordon & Rees Scully MansukhaniMr. Foltz may be contacted at
rfoltz@grsm.com
Let it Shine: California Mandates Rooftop Solar for New Residential Construction
May 16, 2018 —
Garret Murai - California Construction Law BlogCalifornia. Birthplace of the Frisbee, skateboard, television, canned tuna and (yup) fortune cookies has added another first to the list: California has become the first state in the nation to mandate the use of solar panels for new residential construction.
On May 9, 2018, the California Energy Commission (CEC) unanimously approved the state’s 2019 Building Energy Efficiency Standards. The 2019 Energy Efficiency Standards update the California Building Standards Codes found at Title 24 of the California Code of Regulations which are updated every three years. The 2019 Energy Efficiency Standards go into effect on January 1, 2020.
Read the court decisionRead the full story...Reprinted courtesy of
Garret Murai, Wendel Rosen Black & Dean LLPMr. Murai may be contacted at
gmurai@wendel.com
7 Areas where Technology is Shifting the Construction Business
November 21, 2018 —
Eric Weisbrot – JW Surety BondsThe digital transformation of the last two decades has taken hold of the business environment in a powerful way. Companies in nearly all sectors are experiencing a significant shift in the way business is done, with a heavy focus on improved productivity, increase profitability, and enhanced product and service offerings. The construction industry has been historically slow to update its processes and business models in-line with other industries, but technology is currently making its long-awaited appearance in the sector. Construction professionals can embrace these new solutions to run more efficient businesses and keep a closer eye on profitability by reducing
common costs over time.
These are the seven major areas where technology is changing construction.
1 - Business Management
One of the most apparent shifts taking place in the construction industry thanks to technology is the advancement of business processes and systems behind the scenes. Construction managers and job site owners have countless
digital tools at their fingertips to help with managing all aspects of the business. This includes more efficient ways to manage material use and equipment inventory, logging subcontractor hours and pay, and maintaining reporting requirements from regulatory perspectives. Many software solutions integrate with older, legacy systems, making this change an easy one for construction businesses across the board.
2 – Jobsite Productivity
Another area of transformation in construction is productivity on each job site. Technology has offered job owners and general contractors more efficient methods to keep track of project timelines as well as subcontractor progress from start to finish. The technology advancements in this arena come in the form of wearable devices that track work performed, as well as mobile devices that help keep the often mundane tasks necessary for a project’s success up to date and completed on time.
3 – Worker Safety
Although wearables are being utilized in several different ways in the construction business, these devices are making a significant difference in the safety of workers. From smart helmets to digitally enhanced eyewear, workers are alerted to potential hazards on the job that they otherwise could not identify. Similarly, augmented and virtual reality solutions are being used to train workers before they arrive at a job, preparing them for safety concerns well in advance. Even though most licensed and
bonded construction workers have appropriate training throughout their careers, the addition of these resources has the ability to further reduce the risks often associated with construction work.
4 – Surveying and Monitoring
Unmanned aerial vehicles, also known as
drones, are being used throughout construction. These digital tools are equipped with cameras to offer a bird’s eye view of a construction site to help with surveying and identifying potential hazards for workers. Drones also help with inspections throughout a project’s progression, offering some reduction in cost and improving efficiencies.
5 – Improved Materials
Technology is also playing a role in the materials used on job sites. The addition of 3D printing has proven beneficial for construction companies, as concrete composites, plastics, and other materials are being printed and used to create structures on-site. This offers a more cost-effective and accurate way to complete a project.
6 – Self-operating Equipment
Some technology firms are making waves in the construction industry because they are currently developing and implementing
autonomous equipment solutions. Heavy machinery, like excavators, bricklayers, and bulldozers, are already being used on construction sites to help ease the burden of the labor shortage in the industry. While these machines are not yet mainstream, the benefits they offer mean they are likely to become a staple in construction in the years to come.
7 – Big Data
Finally, technology is shifting the construction business by way of big data analytics. With the detailed information from new software solutions, wearable tech, and drones, construction site managers have more data than they have ever had. This influx of information offers a way to analyze job site progress, budgets, timelines, and efficiency for companies large and small.
Author:
Eric Weisbrot is the Chief Marketing Officer of
JW Surety Bonds. With years of experience in the surety industry under several different roles within the company, he is also a contributing author to the surety bond blog.
Read the court decisionRead the full story...Reprinted courtesy of
