Seattle Washington Building Expert Directory

Contractors Should Be Optimistic that the Best Value Tradeoff Process Will Be Employed by Civilian Agencies

September 10, 2018 — Pillsbury's Construction & Real Estate Law Team - Gravel2Gavel
In The Fiscal Year 2019 NDAA Imposes Government-Wide Limitations on the Use of Lowest-Price Technically Acceptable Procurements, Pillsbury attorneys Dick Oliver and Aaron Ralph are optimistic that contractors will soon have additional legal authority to demonstrate to civilian agencies that a best value tradeoff process should be employed.

Congress’ trend of limiting the use of the much-derided lowest price, technically acceptable (LPTA) procurement process continues.

Read the court decision
Read the full story...
Reprinted courtesy of Pillsbury's Construction & Real Estate Law Team

Newmeyer & Dillion Attorneys Listed in the Best Lawyers in America© 2017

September 01, 2016 — Newmeyer & Dillion LLP
Prominent business and real estate law firm Newmeyer & Dillion LLP is pleased to announce that eight of the firm’s attorneys were recently selected for inclusion and will be recognized in their respective areas in The Best Lawyers in America© 2017. They are:

Michael Cucchissi: Real Estate Law
Jeffrey M. Dennis: Insurance Law
Gregory L. Dillion: Commercial Litigation, Construction Law, Insurance Law, Litigation- Construction, Litigation- Real Estate
Joseph A. Ferrentino: Litigation- Construction, Litigation- Real Estate
Thomas F. Newmeyer: Commercial Litigation, Construction Law, Litigation- Real Estate
John A. O’Hara: Litigation- Construction
Bonnie T. Roadarmel: Insurance Law
Carol Sherman Zaist: Commercial Litigation

Beyond the above recognition, Greg Dillion was also named the Best Lawyers® 2017 Construction Law "Lawyer of the Year" in Orange County. Best Lawyers is the oldest peer-review publication for the legal profession. Attorneys are chosen through intensive peer-review surveys in which leading lawyers evaluate their professional peers. Best Lawyers listings are published in almost 70 countries worldwide and are recognized for their reliable and unbiased selections. About Newmeyer & Dillion For more than 30 years, Newmeyer & Dillion has delivered creative and outstanding legal solutions and trial results for a wide array of clients. With over 70 attorneys practicing in all aspects of business, employment, real estate, construction and insurance law, Newmeyer & Dillion delivers legal services tailored to meet each client’s needs. Headquartered in Newport Beach, California, with offices in Walnut Creek, California and Las Vegas, Nevada, Newmeyer & Dillion attorneys are recognized by The Best Lawyers in America©, and Super Lawyers as top tier and some of the best lawyers in California, and have been given Martindale-Hubbell Peer Review's AV Preeminent® highest rating. For additional information, call 949-854-7000 or visit www.ndlf.com. Read the court decision
Read the full story...
Reprinted courtesy of

Administration Launches 'Buy Clean' Construction Materials Push

February 28, 2022 — James Leggate - Engineering News-Record
The Biden administration is moving to put U.S. government purchasing power behind construction materials with lower embodied carbon emissions and pollutants, with the White House launching a “Buy Clean Task Force” on Feb. 15. as part of a slate of initiatives intended to decarbonize manufacturing while boosting the economy. Reprinted courtesy of James Leggate, Engineering News-Record Mr. Leggate may be contacted at leggatej@enr.com Read the full story... Read the court decision
Read the full story...
Reprinted courtesy of

Are Mechanic’s Liens the Be All End All of Construction Collections?

August 12, 2024 — Christopher G. Hill - Construction Law Musings
For those of you familiar with Construction Law Musings, you are aware of my affinity and discussion of those powerful but tricky collection tools: mechanic’s liens. You have heard me tout their ability to secure payment when a contractor or subcontractor has not been paid on a construction project (even in the face of bankruptcy). If you read my construction law blog regularly (though recently not-so-regularly updated), you could get the impression that a mechanic’s lien is an automatic avenue to payment. While mechanic’s liens can be a powerful collection tool, this post is going to discuss some pros and cons of recording, and ultimately suing to enforce, a mechanic’s lien in Virginia. Read the court decision
Read the full story...
Reprinted courtesy of The Law Office of Christopher G. Hill
Mr. Hill may be contacted at chrisghill@constructionlawva.com

Georgia Court Rules that Separate Settlements Are Not the End of the Matter

October 14, 2013 — CDJ STAFF
The Georgia Court of Appeals recently took up the question of how parties in a construction defect settlement relate to one another in terms of apportioning the settlement. Scott Murphy, writing on the Barnes & Thornburg blog clarifies the issues. The underlying construction defect case involved a newly-constructed hotel with mold and mildew problems. The owners sued the contractor (for negligent construction) and the architect (for negligent design). Separately, the owners settled with the contractor for $2.3 million and the architect for $100,000. Subsequently, the contractor sued the architect, attempting to recover part of the settlement the contractors had made with the owners. At trial, the architect prevailed, obtaining a summary judgment that under Georgia law, “joint-tortfeasors can no longer assert contribution or non-contractual indemnity claims.” This was reversed by the Court of Appeals, determining that the two were not joint tortfeasors. Mr. Murphy notes that “the court rejected the parties’ attempt to disavow joint and several liability in their respective settlement agreements.” The court ruled that the contractor could proceed with their claims against the argument. Read the court decision
Read the full story...
Reprinted courtesy of

Hovnanian Reports “A Year of Solid Profitability”

December 30, 2013 — CDJ STAFF
Hovnanian Enterprises has released its results for its fourth quarter and the twelve months ending in October 2013, which are described by Ara K. Havnanian, the company’s Chairman of the Board, President and Chief Executive Officer as “a year of solid profitability,” which he attributes to “revenue growth, gross margin improvement and operating efficiencies,” as reported by The Wall Street Journal. The company’s total revenues for 2013 were $1.85 billion, a 24.2% increase over the 2012 totals. Home sales totaled 5,930, a 10.7% increase over the prior year. Mr. Hovnanian expects “increased demand for new homes,” and he believes that “our industry is still in the early stages of a housing recovery.” Read the court decision
Read the full story...
Reprinted courtesy of

Homebuilders See Record Bearish Bets on Shaky Recovery

June 18, 2014 — Callie Bost – Bloomberg
Someone thinks the housing rebound is built on shaky foundations. A record 180,000 puts traded on the SPDR S&P Homebuilders (XHB) exchange-traded fund on June 11, according to data compiled by Bloomberg. The contract with the highest ownership pays off in the event of a 20 percent slump by December in the ETF tracking stocks from DR Horton Inc. to Williams-Sonoma Inc. Prospects for rising interest rates and an uneven recovery in the housing market have hurt returns this year, sending the SPDR Homebuilders ETF down 3.3 percent. While economic data yesterday showed that builders broke ground on 1 million U.S. homes in May, permits, a proxy for future construction, decreased because of fewer applications for condominiums and apartment buildings. Read the court decision
Read the full story...
Reprinted courtesy of
Ms. Bost may be contacted at cbost2@bloomberg.net

10 Safety Tips for General Contractors

October 09, 2018 — Eric Weisbrot – JW Surety Bonds
The construction industry continues to grow each year, paving the way for general contractors to make a profitable, sustainable living when the job is done right. However, to do so effectively, safety standards need to be met with consistency and focus on each worksite. General contractors who are licensed and bonded must take proactive steps to avoid potentially fatal injuries among their subcontractors and employees, even though this may be easier said than done. To create and maintain a safe worksite each and every time, general contractors should consider how to implement the following best practices and safety tips on the job. 1 – Know the Risks The most crucial step toward maintaining a safe construction site is to first be aware of the risks involved. Each year, thousands of construction workers experience injuries on the job, and some ultimately lose their life because of safety missteps at work. As a general contractor, it is your responsibility to know that construction risks run rampant given the nature of the work. Being tuned into the potential for falls, slips, and other common safety-related incidents is a necessary part of operating a safe worksite for you and your employees. 2 – Require Protective Gear An often overlooked safety precaution on construction sites is the use of up-to-date and well-maintained protective gear. For many subcontractors and employees, it is easy to skip this necessary step in safeguarding themselves from potential safety issues. However, general contractors can take steps to make protective gear a requirement on the job. This may include mandating hardhats and steel-toed shoes, gloves, and eyewear when appropriate. All visitors and workers on a construction site should follow protective gear instructions to avoid unnecessary safety risks. 3 – Educate on Ladder Safety According to the Bureau of Labor Statistics, ladder injuries account for a significant number of construction worker incidents each year, making up more than 200,000 accidents on average. Ladders have continuously ranked high on OSHA’s list of violations at construction sites because the prevalence of injuries is so high. General contractors can help thwart ladder-related injuries among workers by promoting ladder safety training, including reminders about the right ladder to use for each task. Workers should also be well aware of the importance of inspection before use, and they should always follow the three points of contact rule when going up or down a ladder. 4 – Recognize Equipment Pitfalls Many construction workers experience injuries relating to equipment used on the job. This could be tied to getting on or off equipment, or loading and unloading materials from machinery. In any case, general contractors can encourage simple tactics to improve equipment safety measures. Paying close attention to secure footing while getting on or off a machine, having more than one person assist with loading and unloading, and ensuring everyone feels comfortable asking for help with these tasks reduces safety risks. 5 – Document Potential Hazards A general contractor’s main responsibility is to manage the construction site efficiently from start to finish. Part of this duty is recognizing the possible issues on a worksite that may lead to accidents or injuries if not addressed at the beginning of a project. It is necessary to take the time to identify safety risks such as unstable working surfaces, dangerous trenches, or weather-related concerns that may impact the safety of subcontractors, suppliers, or other site visitors. Potential hazards should be documented and shared with site workers, and they should be updated as the project progresses. 6 – Maintain Equipment and Tools Poorly maintained equipment and tools also cause issues on construction sites. The Infrastructure Health and Safety Association suggests that general contractors remind workers to inspect tools, machines, handheld equipment, and vehicles before each use to ensure they are properly maintained. Additionally, understanding the maintenance standards for certain tools or equipment and following those guidelines is crucial to reducing injury on the job. 7 – Minimize Crowds Crowded work areas can be a serious safety issue for general contractors, subcontractors, and vendors and suppliers on site. It is common for crowds to gather during the use of heavy equipment or when a significant task is being completed. However, general contractors should discourage crowd-forming for spectating purposes. This can be done by limiting the number of people allowed to be in an area when certain activities are taking place, and enforcing these rules at every possible opportunity. 8 – Hire Licensed Subcontractors General contractors may have full- or part-time employees as part of their business model, or there may be a heavy presence of subcontractors not directly tied to the main business. In either case, it is essential to have faith in the capabilities of workers, including their willingness and commitment to follow safety standards. General contractors can help ensure each worker is more likely to take safety seriously when they hire licensed contractors who follow through with licensing requirements as mandated by the state or city. 9 – Focus on Training Even after vetting subcontractors and employees based on their licensing status, general contractors also need to ensure training and education are a priority. Several online and in-person courses focus on construction safety training which workers should be encouraged to attend. Safety education programs from OSHA and other reputable sources are crucial to decreasing accidents on the job. 10 – Be Present Finally, general contractors can only have an impact on the safety of the job site when they are purposefully present. It is common for some GCs to stop by a project when they are needed or to check on progress periodically. However, new safety hazards, lacking worker training, and other risks are not easily fixed when the general contractor is not consistently on site. Reducing the potential for falls, slips, trips, and fatalities on the job requires communication with workers, and that takes place most effectively when general contractors are in person. Eric Weisbrot is the Chief Marketing Officer of JW Surety Bonds. With years of experience in the surety industry under several different roles within the company, he is also a contributing author to the surety bond blog. Read the court decision
Read the full story...
Reprinted courtesy of

SEATTLE WASHINGTON BUILDING EXPERT DIRECTORY AND CAPABILITIES