Sixth Circuit Rejects Claim for Reverse Bad Faith
June 17, 2015 —
Tred R. Eyerly – Insurance Law HawaiiThe Sixth Circuit rejected the insurer's claim for reverse bad faith against its insured who made a fraudulent claim after her home was destroyed by fire. State Auto Property and Cas. Ins. Co. v. Hargis, 2015 U.S. App. LEXIS 7475 (6th Cir. April 23, 2015).
The insured's home burned to the ground early one morning. She filed what she would later admit was a fraudulent insurance claim with State Auto for approximately $866,000. State Auto paid in excess of $425,000 before filing an action to declare the policy void. State Farm's investigation eventually led to the insured's admission that she had a friend burn down her house to collect insurance proceeds. An indictment was issued and the insured pled guilty. She was sentenced to a 60-month term and was ordered to pay restitution to State Auto totaling $672,497.
Read the court decisionRead the full story...Reprinted courtesy of
Tred R. Eyerly, Insurance Law HawaiiMr. Eyerly may be contacted at
te@hawaiilawyer.com
Best Practices: Commercial Lockouts in Arizona
April 10, 2023 —
Patrick Tighe - Snell & Wilmer Real Estate Litigation BlogIf a tenant defaults under a commercial lease, Arizona law permits the landlord to re-take possession of the premises by locking out the defaulting tenant. However, if the landlord’s lockout is wrongful, the landlord may be liable for the damages the tenant sustains because of the wrongful lockout. To minimize such liability, here are some general best practices to follow when locking out a defaulting tenant:
- Do Not Breach the Peace. It is vital when performing a lockout to not breach the peace. What constitutes a “breach of the peace” depends on the particular circumstances at hand. For example, if a tenant arrives during the lockout and becomes angry or threatens violence, the landlord should stop performing the lockout and return at a later time. As a general rule of thumb, it is best to perform lockouts in the early morning hours or in the late evening hours when the landlord is less likely to encounter the tenant.
- Provide A Notice of Default. Many commercial leases require the landlord to provide a notice of default before the landlord can lock out a defaulting tenant. Check, double check, and triple check that the landlord followed the lease’s notice of default provisions correctly, including that the landlord sent the notices to all required parties in accordance with the time requirements set forth in the lease.
Read the court decisionRead the full story...Reprinted courtesy of
Patrick Tighe, Snell & WilmerMr. Tighe may be contacted at
ptighe@swlaw.com
No Coverage for Building's First Collapse, But Disputed Facts on Second Collapse
January 10, 2018 —
Tred R. Eyerly – Insurance Law Hawaii While building's first collapse was not covered, there were disputed facts regarding the second collapse, leading to a reversal of the order granting summary judgment to the insurer on both collapses. Intergroup Int'l Ltd. v. Cincinnati Ins. Cos, 2017 Ohio app. LEXIS 5099 (Ohio Ct. App. Nov. 22, 2017). Intergroup bought a building after it was inspected. While leaks on the roof were repaired and a roof truss that was sagging was replaced, the inspector found the roof to be in good shape.
Read the court decisionRead the full story...Reprinted courtesy of
Tred R. Eyerly, Insurance Law HawaiiMr. Eyerly may be contacted at te@hawaiilawyer.com
M&A Representation and Warranty Insurance Considerations in the Wake of the Coronavirus Pandemic
April 06, 2020 —
Lori Smith & Patrick Devine - White and Williams Taking Care of Business BlogIncreasingly, M&A transactions are using representation and warranty insurance (RWI) to bridge the gap between a buyer’s desire for adequate recourse to recover damages arising out of breach of representations in the purchase agreement and a seller’s desire to minimize post-closing risk and holdbacks or purchase price escrows traditionally used as the means to satisfy such obligations. When it works, RWI provides a significant benefit to both parties: it mitigates the buyer’s risk in the event that the seller’s representations and warranties prove untrue, and it permits the seller to reduce the portion of the purchase price that it would otherwise have to leave in escrow to cover future claims for breach of those representations and warranties. However, as the coronavirus pandemic ravages the global economy, insurers are now expressly adding COVID-19 exclusions to their RWI policies. If RWI insurers decline coverage for these losses, the allocation of risk in the representations and warranties (and related indemnity provisions) will be more critical than the parties contemplated when they negotiated the transaction documents.
Unlike in the case of a natural disaster, insurers cannot quantify the economic fallout that may result from the coronavirus pandemic. This uncertainty breeds systemic concern about the number of insurance claims that covered parties of all varieties will bring, which in turn creates an industry-wide reluctance to cover the claims. Based on discussions with market participants, we understand that, at the present time, 70% to 80% of RWI insurers are broadly excluding losses resulting from COVID-19 and similar viruses, epidemics, and pandemics (including government actions in response thereto), 5% to 10% are narrowly excluding specific coronavirus-related losses that are more likely to be implicated in a particular transaction (e.g., losses caused by business interruption), and 10% to 15% may be willing to narrow their exclusions upon completion of the underwriting process, depending on their comfort level after conducting rigorous and heightened diligence. Insurers’ concerns are wide-ranging, but the representations and warranties causing the greatest distress appear to be those regarding customer retention, supply chain matters, undisclosed liabilities, and the absence of changes between the date of the seller’s most recent financial statements and the transaction closing date.
Reprinted courtesy of
Lori Smith, White and Williams and
Patrick Devine, White and Williams
Ms. Smith may be contacted at smithl@whiteandwilliams.com
Mr. Devine may be contacted at devinep@whiteandwilliams.com
Read the court decisionRead the full story...Reprinted courtesy of
Beam Fracture on Closed Mississippi River Bridge Is at Least Two Years Old
May 31, 2021 —
Jim Parsons - Engineering News-RecordThe Arkansas Dept. of Transportation (ARDOT) has terminated the employee responsible for inspecting the Interstate-40 Mississippi River bridge after two-year-old drone footage revealed the presence of a tie-beam fracture that forced
last week’s emergency shutdown.
Reprinted courtesy of
Jim Parsons, Engineering News-Record
ENR may be contacted at ENR.com@bnpmedia.com
Read the full story...
Read the court decisionRead the full story...Reprinted courtesy of
OSHA Issues COVID-19 Guidance for Construction Industry
July 13, 2020 —
Garret Murai - California Construction Law BlogThis past month, after remaining relatively quiet following the coronavirus outbreak, OSHA began issuing industry-specific guidance on how to deal with the coronavirus in the workplace.
Until this month, the only construction industry specific guidance issued by OSHA was an OSHA Alert entitled COVID-19 Guidance for the Construction Workforce, a one page document providing little more guidance than that workers should stay home if sick, wear masks and frequently wash hands to prevent spreading and catching the coronavirus, and to sanitize tools and work areas.
Early this month, OSHA issued more comprehensive guidance for the construction industry. The guidance, as noted in the preface by OSHA is simply guidance, “is not a standard or regulation” and “creates no legal obligations. The guidance supplements general guidance applicable to all workplaces issued earlier by OSHA.
Read the court decisionRead the full story...Reprinted courtesy of
Garret Murai, Nomos LLPMr. Murai may be contacted at
gmurai@nomosllp.com
Contract And IP Implications Of Design Professionals Monetizing Non-Fungible Tokens Comprising Digital Construction Designs
December 26, 2022 —
Colin C. Holley - ConsensusDocsThere is an emerging market that appears poised to increasingly provide opportunities to monetize architectural and other construction designs through the sale of non-fungible tokens (NFTs). Last year, artist Krista Kim reportedly made the first sale of a digital home design via an NFT marketplace, for over $500,000. With some NFTs selling for millions of dollars, monetizing digital designs is undoubtedly an enticing prospect for architects, engineers, and other design professionals. It is thus critical to understand the application of intellectual property rights to NFTs and to address those rights in contracts involving design professionals.
What is an NFT?
To understand the market for NFTs it is necessary to first understand blockchain technology. A blockchain is a decentralized system of recording information via a digital ledger of transactions duplicated and distributed across many computers. The manner in which each block of the ledger chain is created—using a cryptographic mathematical algorithm tied into the previous block, a timestamp, and transaction data—prevents it from being changed retroactively without a change to all subsequent blocks and consensus of the decentralized network.
An NFT is a ‘token’ secured to a blockchain. It can represent ownership of any item that is non-fungible, i.e., any item that has unique qualities that add value and make the item non-interchangeable. NFTs can take unlimited forms, including, for example, tokens representing unique artwork, music, fashion items, in-game items, essays, collectibles, memorabilia, furniture, and real estate.
Read the court decisionRead the full story...Reprinted courtesy of
Colin C. Holley, Watt, Tieder, Hoffar, & Fitzgerald, LLP (ConsensusDocs)Mr. Holley may be contacted at
cholley@watttieder.com
9 Basic Strategies for Pursuing Coverage for Construction Accident Claims
September 05, 2022 —
William S. Bennett - Saxe Doernberger & Vita, P.C.Construction accidents happen all the time. Accidents involving worker injuries or damage to property can shut down a job site and cause significant losses. Contractors should be diligent and aggressive in examining all of the available options for recovery under their different insurance policies and bonds. This article will provide a refresher on some basic tips to help policyholders improve claims practices with respect to construction accidents.
1. Identify relevant insurance policies:
Identifying what policies exist that might cover the loss can sometimes be easier said than done. Construction accidents come in many different forms and can involve many different parties who suffer various types of losses. The general contractor, owner, subcontractors, and vendors could all be involved or affected in some way. Each of these parties has its own insurance coverage and will have promised each other various forms of risk transfer through those policies and through their contracts.
Read the court decisionRead the full story...Reprinted courtesy of
William S. Bennett, Saxe Doernberger & Vita, P.C.Mr. Bennett may be contacted at
wsb@sdvlaw.com