Manhattan to Get Tall, Skinny Tower
October 21, 2013 —
CDJ STAFFAt its narrowest, it’s going to be only sixty feet wide. And that will run 1,350 feet into the air. A new apartment tower is going up in New York, and one of its amenities will be that residents in the top floors will be able to look down on the Empire State Building. “It may be the skinniest building ever,” said Gregg Pasquarelli, the principal of SHoP Architects, the firm that designed the building. He estimates its ratio of height to width as “something like 25-to-1.”
For all its height, the building will be divided into about 100 units. As part of the development deal, the tower will incorporate and preserve the landmark Steinway Hall. The chair of the Landmarks Preservation Commission, Robert Tierney, described it as “the best of both worlds of new construction and design and historic preservation.”
Read the court decisionRead the full story...Reprinted courtesy of
The Hidden Dangers of Construction Defect Litigation: A Redux
January 17, 2013 —
David McLain, Higgings, Hopkins, McLain & Roswell, LLCI previously wrote an article entitled “The Hidden Dangers of Construction Defect Litigation” for the Common Interests magazine, the monthly periodical of the Rocky Mountain Chapter of the Community Associations Institute. In that article, I discussed the potential negative effects of homeowners associations bringing construction defect suits as anything other than a last resort. The purpose of this post is to bring to light, by way of a real life example, the problems discussed in my previous article.
I have recently seen a lawsuit filed by an individual homeowner within a common interest community against the homeowners association, its management company, and the attorneys retained by the association to represent it in a construction defect lawsuit against the original developer, general contractor, and one of the design professionals. In his suit, the homeowner complains that the association’s construction defect attorneys “neglected to amend [their] complaint to include only and specifically the claims for damages for those properties, those buildings or condominium units, either by owner or specific locations, which had sustained damages or had faulty construction for which damages were being sought.” As a result of claiming damages throughout the entire community, the homeowner alleged that the entire community was tarred “with the black brush of litigation.”
As the homeowner explained in his complaint, he purchased a condominium for his daughter-in-law when she moved to Colorado to care for him after the death of his wife.
Read the court decisionRead the full story...Reprinted courtesy of
David McLainMr. McLain can be contacted at
mclain@hhmrlaw.com
Residential Interior Decorator Was Entitled to Lien and Was Not Engaging in Unlicensed Contracting
August 04, 2021 —
David Adelstein - Florida Construction Legal UpdatesResidential construction disputes can sometimes take nasty turns. This is not attributed to one specific reason, but a variety of factors. Sometimes, there are not sophisticated contracts (or contracts at all). Sometimes, relationships and roles get blurred. Sometimes, parties try to skirt licensure requirements. Sometimes, a party is just unreasonable as to their expectations. And, sometimes, a party tries to leverage a construction lien to get what they want. In all disputes, a party would certainly be best suited to work with construction counsel that has experience navigating construction disputes.
An example of a construction dispute that took a nasty turn involving an interior decorator is SG 2901, LLC v. Complimenti, Inc., 2021 WL 2672295 (Fla. 3d DCA 2021). In this case, a condominium unit owner wanted to renovate his apartment. He hired an interior decorator to assist. As his renovation plans became more expansive, the interior decorator told him he would need to hire a licensed contractor and architect. The interior decorator arranged a meeting with those professionals and, at that meeting, they were hired by the owner and told to deal directly with the interior decorator, almost in an owner’s representative capacity since the owner traveled a lot. The interior decorator e-mailed the owner about status and requested certain authorizations, as one would expect an owner’s representative to do. At the completion of the renovation job, the owner did not pay the interior decorator because he was unhappy with certain renovations. The interior decorator recorded a construction lien and sued the owner which included a lien foreclosure claim. There was no discussion of the contracts in this case because, presumably, contracts were based on proposals, were bare-boned, or were oral.
Read the court decisionRead the full story...Reprinted courtesy of
David Adelstein, Kirwin Norris, P.A.Mr. Adelstein may be contacted at
dma@kirwinnorris.com
Did the Court of Appeals Just Raise the Bar for California Contractors to Self-Report Construction-Related Judgments?
June 10, 2015 —
Garret Murai – California Construction Law BlogAn interesting construction case just came out from the California Court of Appeals for the Second District this past month – Pacific Caisson & Shoring, Inc. v. Bernards Bros., Inc., California Court of Appeals for the Second District, Case No. B248320 (May 19, 2015) – which discusses a number of intertwining issues that can be faced by contractors in California and concludes with a result that I’m not sure I quite agree with.
Among the issues discussed by the Court of Appeal were:
- The application of the dreaded Business and Professions Code section 7031 which: (1) precludes a contractor from making a claim for payment for work performed; and (2) requires a contractor to disgorge all monies received for work performed, if the contractor was not properly licensed at all times that work was performed;
- The impact of an unsatisfied judgment against one contractor on the license of another “related” contractor; and
- Whether a stipulated judgment providing for payments over time is an unsatisfied final judgment under the Licensing Law.
Read the court decisionRead the full story...Reprinted courtesy of
Garret Murai, Wendel Rosen Black & Dean LLPMr. Murai may be contacted at
gmurai@wendel.com
3D Printing Innovations Enhance Building Safety
October 07, 2019 —
Mahmut Ekenel & Melissa Sanchez - Construction ExecutiveThe mention of 3D printing alone is enough to get people excited, often conjuring images of a desktop console that can download and create three dimensional objects such as prototypes, or mechanical parts. And yet, in recent years the technology has given way to a slight impatience, as people begin to wonder how and when it will have a direct impact on both their lifestyles and their businesses.
The construction industry has been quick to take advantage of these innovations, and the effects are tangible, especially regarding building safety. The 3D construction technology allows for several key advantages in terms of faster construction times, uncompromised quality of construction and lower costs—allowing for affordable dwellings to be quickly built for people in need.
These advantages also lead to safety improvements during the building process. The ability to accelerate construction time without requiring an increase in labor results in a fewer construction-related workplace injuries and a reduction in material waste, making it an environmentally friendly construction method as well.
ICC-Evaluation Service (ICC-ES), a subsidiary of the International Code Council (ICC) which develops model codes and standards (i.e. International Building Code, International Residential Code) and delivers a wide array of building safety services, has taken the lead on developing acceptance criteria to address building code compliance of 3D printed construction. Currently, 3D construction technology is not within the provisions of the International Building Code (IBC) or International Residential Code (IRC). The acceptance criteria introduces new compliance measures for interior and exterior 3D printed concrete walls (with and without structural steel reinforcement), load-bearing and non-load-bearing walls, and shear walls in one-story, single-unit, residential dwellings. The 3D walls are constructed by printing two outer layers of 3D concrete and then filling the core with 3D concrete to form a solid wall.
Reprinted courtesy of
Mahmut Ekenel & Melissa Sanchez, Construction Executive, a publication of Associated Builders and Contractors. All rights reserved.
Mr. Ekenel may be contacted at mekenel@icc-es.org
Ms. Sanchez may be contacted at msanchez@icc-es.org
Read the court decisionRead the full story...Reprinted courtesy of
Toll Brothers Honored at the Shore Builders Association of Central New Jersey Awards
May 13, 2024 —
Toll BrothersFREEHOLD, N.J., May 07, 2024 (GLOBE NEWSWIRE) --
Toll Brothers, Inc. (NYSE:TOL), the nation's leading builder of luxury homes, today announced that the Company's New Jersey Division was honored with six awards at the 2024 Fabulous Achievements in Marketing Excellence (FAME) Awards held at South Gate Manor in Freehold, New Jersey.
Presented by the Shore Builders Association of Central New Jersey, the FAME Awards honor home builders of the New Jersey Builders Associations who have made major contributions to the home building industry. The awards span categories from product and design to advertising, marketing, and professional achievements. Toll Brothers was selected as the winner in the following categories:
For more information on Toll Brothers communities in New Jersey, visit
TollBrothers.com/NewJersey.
About Toll Brothers
Toll Brothers, Inc., a Fortune 500 Company, is¬ the nation's leading builder of luxury homes. The Company was founded 57 years ago in 1967 and became a public company in 1986. Its common stock is listed on the New York Stock Exchange under the symbol "TOL." The Company serves first-time, move-up, empty-nester, active-adult, and second-home buyers, as well as urban and suburban renters. Toll Brothers builds in over 60 markets in 24 states: Arizona, California, Colorado, Connecticut, Delaware, Florida, Georgia, Idaho, Illinois, Maryland, Massachusetts, Michigan, Nevada, New Jersey, New York, North Carolina, Oregon, Pennsylvania, South Carolina, Tennessee, Texas, Utah, Virginia, and Washington, as well as in the District of Columbia. The Company operates its own architectural, engineering, mortgage, title, land development, smart home technology, and landscape subsidiaries. The Company also develops master-planned and golf course communities as well as operates its own lumber distribution, house component assembly, and manufacturing operations.
Read the court decisionRead the full story...Reprinted courtesy of
Contract’s Definition of “Substantial Completion” Does Not Apply to Third Party for Purposes of SOL, Holds Court of Appeal
June 15, 2020 —
Garret Murai - California Construction Law BlogThose of you in the construction industry know that the two primary statutes of limitation are the 4-year year statute of limitations for patent defects and 10-year statute of limitations for latent defects. Both statutes begin to run on “substantial completion.”
In Hensel Phelps Construction Co. v. Superior Court of San Diego, Case No. D076264 (January 22, 2020), the 4th District Court of Appeal examined whether the term “substantial completion,” as used in Civil Code section 941, which applies to residential construction, can be defined by the parties’ contract and applied to third-parties.
The Hensel Phelps Case
Hensel Phelps Construction Co. entered into a prime construction contract with the owner and developer of a mixed-use project in San Diego. Hensel Phelps was the general contractor on the project. The project included a residential condominium tower which would eventually be managed and maintained by Smart Corner Owners Association. Smart Corners was not a party to the contract.
Read the court decisionRead the full story...Reprinted courtesy of
Garret Murai, Nomos LLPMr. Murai may be contacted at
gmurai@nomosllp.com
Poor Record Keeping = Going to the Poor House (or, why project documentation matters)
June 11, 2014 —
Melissa Dewey Brumback – Construction Law in North CarolinaYou are an engineer or architect. You understand the importance of thorough designs. What about thorough documentation of the daily happenings on the construction project? That is equally important.
As regular readers of this blog know, I have often spoken of the importance of proper record keeping on construction projects. In fact, lack of good project records is one of the 7 mistakes in my white paper 7 Critical Mistakes that Engineers & Architects make During Project Negotiation and Execution that Sabotage their Projects & Invite Litigation.
Now, a construction management expert, who, like me, sees the ugly when construction projects turn bad, has weighed in with perhaps the authoritative reasoning and rationale (pdf) for good project records.
Read the court decisionRead the full story...Reprinted courtesy of
Melissa Dewey Brumback, Construction Law in North CarolinaMs. Brumback may be contacted at
mbrumback@rl-law.com