Fairfield Connecticut Building Expert Directory

New York Appeals Court Rekindles the Spark

March 16, 2017 — Lian Skaf - White and Williams LLP
In John Trimble, et al. v. City of Albany, et al., 2016, 144 A.D.3d 1484; 42 N.Y.S. 3d 432 (N.Y. App. Div.), the Supreme Court of New York, Appellate Division, addressed the issue of governmental immunity for municipal fire companies. The court held that the plaintiff, John Trimble (Trimble), had sufficient evidence related to the four-pronged test for establishing a “special relationship” between a municipality and a citizen for liability to attach. In addition, the court held that the defendants were not entitled to summary judgment on the issue of governmental immunity. Specifically, regarding the latter holding, the court stated that, when there is no actual choice made on the part of the government, the government’s actions cannot be considered discretionary and immunity will not apply. In the case at hand, a fire occurred at Trimble’s home on the evening of February 2, 2013. Trimble called 911 and the Department of Fire and Emergency Services for the City of Albany (the Department) responded. After extinguishing the fire, the Department conducted an investigation and cleared the home. The Department’s investigators then told Trimble that the fire was extinguished and it was safe to enter the home. Trimble did so, removing some items so that he could stay with relatives that night. Several hours later, there was a rekindle and the rekindled fire destroyed the home. Read the court decision
Read the full story...
Reprinted courtesy of Lian Skaf, White and Williams LLP
Mr. Skaf may be contacted at skafl@whiteandwilliams.com

Some Work Cannot be Included in a Miller Act Claim

June 28, 2021 — Christopher G. Hill - Construction Law Musings
The Miller Act is close to my heart here at Construction Law Musings. Payment bond claims under the Miller Act help protect subcontractors on construction projects where the national government or its agencies are the owners of the property and therefore mechanic’s liens are unavailable. Even where you follow the proper claims process under this statute, the question remains as to what sorts of costs can be included in the claim. A recent case out of the Eastern District of Virginia federal court in Alexandria, VA gives some insight into the limits of claims under the federal Miller Act. In Dickson v Forney Enterprises, Inc. et. al., the Court looked at the question of whether costs of a project manager’s purely clerical duties can be included and correspondingly whether performing those duties can extend the relevant one-year limitations period for filing suit. Read the court decision
Read the full story...
Reprinted courtesy of The Law Office of Christopher G. Hill
Mr. Hill may be contacted at chrisghill@constructionlawva.com

Will Superusers Future-Proof the AEC Industry?

May 13, 2019 — Aarni Heiskanen - AEC Business
Design professionals who leverage tools and technology and, at the same time, have people skills, are essential to the future of the industry. They are Superusers, the protagonists of the latest book by Randy Deutsch. Randy Deutsch is an architect, educator, workshop leader, writer, and international keynote speaker. I had a chance to interview him about his book, Superusers: Design Technology Specialists and the Future of Practice. First, I was curious to know why he chose this topic for his fourth book. He explains: “Right now, it made a lot of sense to focus on the individual, not focus on collaboration and building teams, and really define what each individual team member should be.” Who Are Superusers? IT, technology, and tool specialists are typically experts in a relatively narrow field. Designers, especially architects, must have a wider perspective. Superusers are design technologists; liaisons between business needs and technology solutions. They demonstrate certain skillsets and mindsets. Read the court decision
Read the full story...
Reprinted courtesy of Aarni Heiskanen, AEC Business
Mr. Heiskanen may be contacted at aec-business@aepartners.fi

A Lot of Cheap Housing Is About to Get Very Expensive

October 21, 2015 — Patrick Clark – Bloomberg
Urban Institute fellow Erika Poethig has a poster in her office showing 22 apartment buildings along Chicago's Lake Shore Drive. They were all built with U.S. government dollars to provide affordable housing to thousands of low-income households—and have since been converted to market-rate apartments and condominiums. For Poethig, a former official at the Department of Housing and Urban Development, those apartments are a warning. There are currently about 1.34 million units of affordable housing created by a HUD program known as Section 8 project-based rental assistance, according to a blog post published on Wednesday by Poethig and her Urban Institute colleague Reed Jordan. More than 30 percent of those units are kept affordable by contracts that are set to expire by the end of 2017. Read the court decision
Read the full story...
Reprinted courtesy of Patrick Clark, Bloomberg

Construction Defect Leads to Death, Jury Awards $39 Million

November 27, 2013 — CDJ STAFF
A failure in the installation of a 13-ton concrete panel in Milwaukee County lead to the death of a 15-year-old boy in 201; two others were also injured. A lawsuit over this has concluded with the contractor, Advance Cast Stone, found culpable due to their concealing that the panel was not installed as prescribed. The incident happened at a parking garage operated by the county. Advanced Cast Stone made the claim that the method they used to secure the panel had been approved by other in the project. The jury awarded $6.3 million to the estate of Jared Kellner, $1.5 million each to the young man who was injured, Eric Wosniki, and his parents. The county was also awarded $6 million for lost revenue in the parking garage and for repairs. Read the court decision
Read the full story...
Reprinted courtesy of

Affordable Housing, Military Contracts and Mars: 3D Printing Construction Potential Builds

September 05, 2022 — Adam J. Weaver & Lindsey Mitchell - Gravel2Gavel Construction & Real Estate Law Blog
The 3D printing construction market is likely on the cusp of a boom. This unique construction method boasts many advantages in comparison to traditional forms of construction. Projects can be completed more quickly and at a fraction of the cost, given fewer laborers are required and the materials used are much cheaper. Though market growth stalled during the COVID-19 pandemic, industry leaders expect 3D printing construction to experience exponential growth in the coming years. While 3D printing technology has risen in popularity and prominence in the past couple of decades, it is only recently that 3D printing companies have begun making strides in the construction industry. Critical to the construction process is the software that is used to create and model the planned structure. A software program turns a building’s blueprint into code that then dictates the movement of a 3D printer on the construction site. After a concrete-like mix is loaded into the printer, the printer begins to build the walls by laying one cylindrical layer of concrete at a time, in accordance with the blueprint. There is no one-size-fits-all approach in 3D printing construction: some companies print the core structure as well as the roof and floor of the structure, while others print only the core and shell and install those portions separately using traditional methods and materials. Reprinted courtesy of Adam J. Weaver, Pillsbury and Lindsey Mitchell, Pillsbury Mr. Weaver may be contacted at adam.weaver@pillsburylaw.com Read the court decision
Read the full story...
Reprinted courtesy of

New York City Dept. of Buildings Explores Drones for Facade Inspections

December 13, 2021 — Jeff Rubenstone - Engineering News-Record
Drones have only seen limited use in New York City for construction documentation and facade inspections due to restrictive local ordinances. But that may be changing with the release of a new report from the New York City Dept. of Buildings, which sees future potential for unmanned aerial vehicles (UAV), or drones, to be used in building facade inspections. Reprinted courtesy of Jeff Rubenstone, Engineering News-Record Mr. Rubenstein may be contacted at rubenstonej@enr.com Read the full story... Read the court decision
Read the full story...
Reprinted courtesy of

NLRB Broadens the Joint Employer Standard

September 17, 2015 — Craig Martin – Construction Contractor Advisor
Perhaps in anticipation of Labor Day, the National Labor Relations Board issued its ruling in Browning-Ferris Indus. of Cal. d/b/a BFI Newby Island Recyclery, establishing an easier standard for unions to prove that a joint employer relationship exists. This will make it easier for unions to make the upstream company, like a parent company, liable for unfair labor practices, even if the upstream company had no direct involvement. Some Background BFI runs a recycling plant and contracts with Leadpoint to provide workers to sort garbage in the recycling plant. The staffing agreement specifically stated that Leadpoint was the sole employer of the personnel it supplied and Leadpoint handled supervision of the employees, not BFI. Leadpoint’s employees sought to unionize and an election was held. The union filed a petition seeking a determination that Leadpoint and BFI were a joint employers. Read the court decision
Read the full story...
Reprinted courtesy of Craig Martin, Lamson, Dugan and Murray, LLP
Mr. Martin may be contacted at cmartin@ldmlaw.com

FAIRFIELD CONNECTICUT BUILDING EXPERT DIRECTORY AND CAPABILITIES