Construction Defect Specialist Joins Kansas City Firm
January 13, 2014 —
CDJ STAFFDavid Schatz, whose practice specializes in construction disputes and defects, has joined the Kansas City, Missouri firm Spencer Fane Britt & Brown LLP in their litigation practice group. Mr. Schatz’s expertise also includes banking and finance, banking litigation, commercial disputes, insurance, surety, employment, contract claims, and personal injury.
Pat Whalen, Chairman of Spencer Fane Britt & Brown, said that Schatz “brings great experience across a range of industries, but many of us in Kansas City are particularly pleased by his construction and general litigation credentials, which will fit will with the resources we’re building in those areas.”
Read the court decisionRead the full story...Reprinted courtesy of
Unlicensed Contractors Nabbed in Sting Operation
September 09, 2011 —
CDJ STAFFThe California State License Board charged sixteen people in the Fresno area with accepting contracting jobs without licenses. The Statewide Investigative Fraud Team of the CSLB set up a sting operation at a home in Clovis, California seeking bids on tree service, painting, and general contracting services. Those who bid for jobs at more than $500 are required under California law to be licensed. Unlicensed contractors can only work on jobs with a cost to the homeowner of less than $500 and must inform the homeowner that they are not licensed.
In addition to citing contractors for not possessing appropriate licenses, the CSLB also cited contractors for failure to carry workers compensation insurance and illegal advertising. Further, California law limits down payments to the lesser of ten percent or $1,000. Two contractors were cited for requesting excessive down payments.
One contractor, an unlicensed tree service contractor, had been cited previously in a sting operation. He failed to show up for his court date.
Read the full story…
Read the court decisionRead the full story...Reprinted courtesy of
Order for Appraisal Affirmed After Insureds Comply with Post-Loss Obligations
April 15, 2015 —
Tred R. Eyerly – Insurance Law HawaiiThe Florida Court of Appeal affirmed an order compelling an appraisal because the insureds complied with their post-loss obligations under the policy. State Farm Fla. Ins. Co. v. Cardelles, 2015 Fla. App. LEXIS 2559 (Fla. Ct. App. Feb. 25, 2015).
The insureds suffered damage to their home after Hurricane Katrina on August 25, 2005, and again after Hurricane Wilma on October 24, 2005. After each hurricane, State Farm was notified. With the assistance of their public adjuster, the insureds submitted sworn proofs of loss for damages caused by each hurricane. After the deductible, State Farm paid $19,000 for the Hurricane Katrina claim and $13,000 for the Hurricane Wilma claim. The insureds repaired their roof and made minor repairs to their home with the State Farm payment, but claimed the payment was insufficient to fully repair the damage from the two hurricanes.
Four years later, the insureds hired a second public adjuster, who submitted a supplemental claim to State Farm for $127,000 in damages. State Farm requested documents and an updated sworn proof of loss. The insureds did not submit any additional documents because they had not made any additional repairs without further payment from State Farm. The insureds did, however, allow State Farm to make a further inspection of the damages.
Read the court decisionRead the full story...Reprinted courtesy of
Tred R. Eyerly, Insurance Law HawaiiMr. Eyerly may be contacted at
te@hawaiilawyer.com
10 Safety Tips for General Contractors
October 09, 2018 —
Eric Weisbrot – JW Surety BondsThe construction industry continues to grow each year, paving the way for general contractors to make a profitable, sustainable living when the job is done right. However, to do so effectively, safety standards need to be met with consistency and focus on each worksite. General
contractors who are licensed and bonded must take proactive steps to avoid potentially fatal injuries among their subcontractors and employees, even though this may be easier said than done. To create and maintain a safe worksite each and every time, general contractors should consider how to implement the following best practices and safety tips on the job.
1 – Know the Risks
The most crucial step toward maintaining a safe construction site is to first be aware of the risks involved. Each year, thousands of
construction workers experience injuries on the job, and some ultimately lose their life because of safety missteps at work. As a general contractor, it is your responsibility to know that construction risks run rampant given the nature of the work. Being tuned into the potential for falls, slips, and other common safety-related incidents is a necessary part of operating a safe worksite for you and your employees.
2 – Require Protective Gear
An often overlooked safety precaution on construction sites is the use of up-to-date and well-maintained protective gear. For many subcontractors and employees, it is easy to skip this necessary step in safeguarding themselves from potential safety issues. However, general contractors can take steps to make protective gear a requirement on the job. This may include mandating hardhats and steel-toed shoes, gloves, and eyewear when appropriate. All visitors and workers on a construction site should follow protective gear instructions to avoid unnecessary safety risks.
3 – Educate on Ladder Safety
According to the Bureau of Labor Statistics, ladder injuries account for a significant number of construction worker incidents each year, making up more than 200,000 accidents on average. Ladders have continuously ranked high on OSHA’s list of violations at construction sites because the prevalence of injuries is so high. General contractors can help thwart ladder-related injuries among workers by promoting ladder safety training, including reminders about the right ladder to use for each task. Workers should also be well aware of the importance of inspection before use, and they should always follow the three points of contact rule when going up or down a ladder.
4 – Recognize Equipment Pitfalls
Many construction workers experience injuries relating to equipment used on the job. This could be tied to getting on or off equipment, or loading and unloading materials from machinery. In any case, general contractors can encourage simple tactics to improve equipment safety measures. Paying close attention to secure footing while getting on or off a machine, having more than one person assist with loading and unloading, and ensuring everyone feels comfortable asking for help with these tasks reduces safety risks.
5 – Document Potential Hazards
A general contractor’s main responsibility is to manage the construction site efficiently from start to finish. Part of this duty is recognizing the possible issues on a worksite that may lead to accidents or injuries if not addressed at the beginning of a project. It is necessary to take the time to identify safety risks such as unstable working surfaces, dangerous trenches, or weather-related concerns that may impact the safety of subcontractors, suppliers, or other site visitors. Potential hazards should be documented and shared with site workers, and they should be updated as the project progresses.
6 – Maintain Equipment and Tools
Poorly maintained equipment and tools also cause issues on construction sites. The Infrastructure Health and Safety Association suggests that general contractors
remind workers to inspect tools, machines, handheld equipment, and vehicles before each use to ensure they are properly maintained. Additionally, understanding the maintenance standards for certain tools or equipment and following those guidelines is crucial to reducing injury on the job.
7 – Minimize Crowds
Crowded work areas can be a serious safety issue for general contractors, subcontractors, and vendors and suppliers on site. It is common for crowds to gather during the use of heavy equipment or when a significant task is being completed. However, general contractors should discourage crowd-forming for spectating purposes. This can be done by limiting the number of people allowed to be in an area when certain activities are taking place, and enforcing these rules at every possible opportunity.
8 – Hire Licensed Subcontractors
General contractors may have full- or part-time employees as part of their business model, or there may be a heavy presence of subcontractors not directly tied to the main business. In either case, it is essential to have faith in the capabilities of workers, including their willingness and commitment to follow safety standards. General contractors can help ensure each worker is more likely to take safety seriously when they hire licensed contractors who follow through with
licensing requirements as mandated by the state or city.
9 – Focus on Training
Even after vetting subcontractors and employees based on their licensing status, general contractors also need to ensure training and education are a priority. Several online and in-person courses focus on construction safety training which workers should be encouraged to attend. Safety
education programs from OSHA and other reputable sources are crucial to decreasing accidents on the job.
10 – Be Present
Finally, general contractors can only have an impact on the safety of the job site when they are purposefully present. It is common for some GCs to stop by a project when they are needed or to check on progress periodically. However, new safety hazards, lacking worker training, and other risks are not easily fixed when the general contractor is not consistently on site. Reducing the potential for falls, slips, trips, and fatalities on the job requires communication with workers, and that takes place most effectively when general contractors are in person.
Eric Weisbrot is the Chief Marketing Officer of JW Surety Bonds. With years of experience in the surety industry under several different roles within the company, he is also a contributing author to the surety bond blog.
Read the court decisionRead the full story...Reprinted courtesy of
Harlem Developers Reach Deal with Attorney General
February 25, 2014 —
Beverley BevenFlorez-CDJ STAFFJoseph Scarpinito and Shiraz Sanjana, developers of the Mirada condominium in Harlem, New York can avoid a contempt charge from state Attorney General Eric Schneiderman, “if they make the required repairs and obtain a permanent certificate of occupancy at the property,” according to The Real Deal.
Scarpinito and Sanjana “agreed to deposit $200,000 into an escrow account and make repairs to stop flooding and other defects at the 161 East 110th Street condo, which are required to obtain a certificate of occupancy from the city Department of Buildings.”
Last December, the Attorney General “filed suit against the developers, alleging they submitted false filings to his office in claiming that Scarpinito’s 83-year-old mother was the actual developer of the 68-unit condo.” Furthermore, the condo board lawyers submitted a complaint to Schneiderman “detailing extensive defects in the building, including water leaks entering the building from the roof and façade.”
The developers have been ordered “to submit weekly reports to the AG’s office detailing progress on the repairs and obtaining the certificate of occupancy.”
Read the court decisionRead the full story...Reprinted courtesy of
Tall Mass Timber Buildings Now Possible Under 2021 IBC Code Changes
February 03, 2020 —
Kenneth Bland - Construction ExecutiveThe International Code Council (ICC) has approved 17 changes to the 2021 editions of the International Building Code (IBC) and International Fire Code, allowing for mass timber buildings up to 18 stories. With the addition of three new mass timber construction types (Type IV-A, IV-B, and IV-C), this is the first time in the history of the modern building code that significantly new construction types have been added to the code.
Building Materials
The primary building material that makes tall mass timber (TMT) buildings possible is cross-laminated timber (CLT). CLT is manufactured from dimension lumber (nominal 2x lumber) laid side-by-side or mass plywood panels of a specified width. Laminations of lumber are typically laid perpendicular to each other to form panels of various thicknesses that are bonded together using heat resistant adhesives that cure in large hydraulic presses. CLT commonly consists of an odd number of laminations.
These solid wood panels can be anywhere from 6 inches to 20 inches nominal thickness and 60 feet long. Typical CLT panels will be 6 inches to 14 inches nominal thickness. The panels are fabricated off site, transported onto the construction site and assembled in a manner that is efficient and remarkably fast. CLT panels can be used as floor, wall, or roof building elements supported by glued-laminated beams and columns.
Reprinted courtesy of
Kenneth Bland, Construction Executive, a publication of Associated Builders and Contractors. All rights reserved.
Read the court decisionRead the full story...Reprinted courtesy of
Miami's Condo Craze Burns Out on Strong Dollar
June 10, 2015 —
Prashant Gopal and John Gittelsohn – BloombergThe sales office for condominiums at Miami’s Brickell City Centre attracted more than 100 visitors daily last year, with prospective buyers crowding in and snapping selfies beside a scale model of the $1 billion project.
Now, the flow of people has trickled to about a quarter of what it once was.
“Buyers are asking really good questions” instead of rushing into deals, said Stephen Owens, president of the U.S. unit of Hong Kong-based Swire Properties Ltd., the developer of the 9-acre (3.6-hectare) condo, hotel, office and shopping complex. “Two years ago, it was, ‘Where can I sign?’”
Reprinted courtesy of
Prashant Gopal, Bloomberg and
John Gittelsohn, Bloomberg Read the court decisionRead the full story...Reprinted courtesy of
Structural Failure of Precast-Concrete Span Sets Back Sydney Metro Job
January 04, 2018 —
Chris Webb - Engineering News-RecordOriginally Published by CDJ on February 23, 2017
A key component of Australia’s biggest public transport infrastructure project—Sydney’s $6.3-billion Metro North West—is the subject of a critical and detailed technical report describing how an elevated viaduct span failed at a stitch joint between two precast segments during construction last September. Project officials say the affected span, which did not suffer a progressive collapse, has since been removed and its replacement fast-tracked to avoid further delays. Little additional detail was provided.
Read the court decisionRead the full story...Reprinted courtesy of
Chris Webb, ENR
