Seattle Washington Building Expert Directory

California Contractors – You Should Know That Section 7141.5 May Be Your Golden Ticket

February 18, 2020 — Amy L. Pierce, Mark A. Oertel & John Lubitz - Lewis Brisbois Bisgaard & Smith LLP
Under California’s Contractors’ State License Law, Cal. Bus. & Prof. Code §§ 7000 et seq., all contractors’ and subcontractors’ licenses expire two years from the last day of the month in which the license issued, or two years from the date on which the renewed license last expired. The Contractors State License Board (CSLB) sends licensees a renewal application 60 to 90 days prior to the date the license is set to expire. Most contractors have various controls in place to make sure that the renewal application is timely filed and the required fee paid. Even so, we are only human and mistakes are made, and a renewal application filing deadline can be missed for a variety of reasons, e.g., the licensee’s mailing address has not been updated on the CSLB’s records, the individual responsible for filing the license renewal is out on leave, there has been a death in the family or a serious health issue, etc. Quoting Robert Burns, even “[t]he best-laid schemes of mice and men go oft awry” (To a Mouse, 1786). General contractors should be cognizant of both their and their subcontractors’ license renewal obligations and deadlines. If a licensee missed timely filing its renewal application, Business & Professions Code Section 7141.5may provide some relief. Section 7141.5 provides that the Registrar of Contractors,

“may grant the retroactive renewal of a license if the licensee requests the retroactive renewal in a petition to the registrar, files an application for renewal on a form prescribed by the registrar, and pays the appropriate renewal fee and delinquency fee prescribed by this chapter. This section shall only apply for a period not to exceed 90 days from the due date and only upon a showing by the contractor that the failure to renew was due to circumstances beyond the control of the licensee.”

Reprinted courtesy of Lewis Brisbois Bisgaard & Smith LLP attorneys Amy Pierce, Mark Oertel and John Lubitz Ms. Pierce may be contacted at Amy.Pierce@lewisbrisbois.com Mr. Oertel may be contacted at Mark.Oertel@lewisbrisbois.com Mr. Lubitz may be contacted at John.Lubitz@lewisbrisbois.com Read the court decision
Read the full story...
Reprinted courtesy of

Big Builder’s Analysis of the Top Ten Richest Counties

June 26, 2014 — Beverley BevenFlorez-CDJ STAFF
Big Builder took Forbes’ 2014 top ten richest U.S. counties list (based on household median income) and researched who the top builders were in those regions, buyer requirements, among other categories. The top three richest counties according to Forbes and Big Builder are Falls Church, Virginia; Loudoun County, Virginia; and Los Alamos County, New Mexico. Information listed for each county include the median-closing price, price per square foot, living square feet, top builders, and an examination of what makes each region unique. Read the court decision
Read the full story...
Reprinted courtesy of

Construction Defects in Home a Breach of Contract

September 09, 2011 — CDJ STAFF

The Supreme Court of North Dakota has ruled in Leno v. K & L Homes, affirming the verdict of the lower court. K & L Homes argued that district court had erred in several ways, including by refusing to instruct the jury on comparative fault, denying a request for inspection, and not allowing a defendant to testify on his observations during jury viewing.

The Lenos purchased a home constructed by K & L Homes, after which they alleged they found cracks, unevenness, and shifting, which they attributed to improper construction. They claimed negligence on the part of K & L Homes. K & L Homes responded that the Lenos were responsible for damage to the home. The Lenos dropped their negligence claim, arguing breach of contract and implied warranties.

Before the trial, after the discovery period had passed, K & L Homes requested to inspect the home. This was rejected by the court. Kelly Moldenhauer, the owner of K & L Homes sought to testify about his observations during the jury’s viewing of the house. The court denied this too. The jury found that K & L was in breach of contract and awarded damages to the Lenos.

The North Dakota Supreme Court noted that K & L Homes gave “warranties that the home had been built according to local building codes and laws, and that the house was fit for its particular purpose as a residence.” The court found that a defective home breached this warranty. Further, the home violated an implied warranty of fitness.

The district court had denied K & L’s request to inspect the home, as the discovery period had ended and it would not give the Lenos time to do further discovery of their own. At the time of the request, there was only twenty-two days before the trial. The Supreme Court ruled that this was not an abuse of discretion of the part of the district court.

The Lenos had requested that Moldenhauer’s testimony not be permitted, as it would “have the same effect as if the court had granted K & L Homes’ pretrial request for inspection.” K & L Homes agreed to this in court, replying, “okay.”

The decision affirms the judgment of the district court and the damages awarded to the Lenos by the jury.

Read the court’s decision…

Read the court decision
Read the full story...
Reprinted courtesy of

The Power of Planning: Four Key Themes for Mitigating Risk in Construction

November 09, 2020 — Zac Hays - Construction Executive
Construction is, and always has been, known as a relatively risky business. Whether it is dealing with factors that can be controlled or beyond control, proactively managing risk has proven to be of the most critical factors in delivering quality projects faster, more efficiently and with wider margins. Many people assume on-site activities introduce the greatest amount of uncertainty and potential risk. But many mistakes in construction originate in the planning phase – meaning preconstruction is ripe with opportunity to be the most effective place for mitigating risk, saving money and ultimately broadening margins. There are many ways to mitigate risk before projects even start, but four key themes emerge to be clear, repeatable opportunities for success. DIGITIZE THE PLANNING PHASE Preconstruction is where ideas are brought to life by translating architectural designs into a real, constructible plan. Decisions made at this stage can determine the project’s success and profitability – but it’s far from straightforward. Estimating, scheduling and planning are highly complex activities that depend on constantly changing details and are all areas where missed information or miscommunication can lead to costly rework down the line. Reprinted courtesy of Zac Hays, Construction Executive, a publication of Associated Builders and Contractors. All rights reserved. Read the court decision
Read the full story...
Reprinted courtesy of

Flood Sublimits Do Not Apply to Loss Caused by Named Windstorm

May 07, 2015 — Tred R. Eyerly – Insurance Law Hawaii
The New Jersey Superior Court considered whether recovery for storm surge was limited by the policy's sublimit for loss caused by flood. Public Serv. Enter. Group, Inc. v. Ace Am. Ins. Co., 2015 N. J. Super. Unpub. LEXIS 620 (N.J. Super. Ct. Law Div. March 23, 2015). Storm surge from Superstorm Sandy inundated and damaged Public Service Enterprise Group, Inc.'s (PSEG) property, including eight large generating stations. PSEG had coverage of $1 billion under policies with defendant carriers. There was no sublimit in the policies for "named windstorms," other than named windstorms in Florida. A $250 million sublimit appeared in the policies for losses caused by "flood." The carriers paid only a portion of PSEG's claim. The total damages exceeded $500 million. Read the court decision
Read the full story...
Reprinted courtesy of Tred R. Eyerly, Insurance Law Hawaii
Mr. Eyerly may be contacted at te@hawaiilawyer.com

U.S. Department of Defense Institutes New Cybersecurity Maturity Model Certification

July 13, 2020 — Joseph N. Frost - Peckar & Abramson
Contractors doing business with the Federal Government, particularly with the Department of Defense (“DoD”), commonly handle sensitive information that is not intended to be disseminated. Controlled Unclassified Information (“CUI”) is one such type and is more specifically defined as “information that requires safeguarding or dissemination controls pursuant to and consistent with laws, regulations and government-wide policies.”1 Because some DoD contracts require contractors to handle CUI, certain safeguards have been put in place to ensure its security. This article briefly touches on the current cybersecurity protocols, followed by a discussion of the new system being developed by the DoD, and what contractors most need to know about the new system. The Defense Federal Acquisition Regulation Supplement (“DFARS”) has long required contractors to comply with certain cybersecurity standards, as published by the National Institute of Standards and Technology (“NIST”). Specifically, DFARS sought to implement the cybersecurity framework found in NIST Special Publication (“SP”) 800-171, entitled “Protecting Controlled Unclassified Information in Nonfederal Systems and Organizations.” NIST SP 800-171 sets forth fourteen (14) families of recommended security requirements for protecting the confidentiality of CUI in nonfederal systems and organizations, including, among others, access control, audit and accountability, incident response, personnel security, and system and information integrity. However, after a series of data breaches, the DoD reassessed the efficacy of the continued use of NIST SP 800-171 and ultimately decided to institute a new methodology to ensure the security of CUI. Read the court decision
Read the full story...
Reprinted courtesy of Joseph N. Frost, Peckar & Abramson
Mr. Frost may be contacted at jfrost@pecklaw.com

When Construction Defects Appear, Don’t Choose Between Rebuilding and Building Your Case

October 11, 2021 — Curtis Martin - ConsensusDocs
When construction defects occur during construction, they intensify pressure from a schedule that may already be tight. Defects must be analyzed, confirmed, removed, and replaced and this can be time consuming. Or course, a construction schedule rarely anticipates defects, demolition, and rework and the owner will still expect the project to be completed on time; however, pressing forward with immediate remediation may have unintended consequences. Before starting demolition, consider the evidentiary doctrine of spoliation. Spoilation occurs when a party destroys or unreasonably deprives another party of evidence and courts have imposed sanctions on a party that deprives an opponent of evidence. The doctrine has historically concerned documents, but its application has extended to electronic data, and courts also apply it to building conditions in construction defects cases. So, before tearing out or fixing defective work, consider the need to allow the opposing party to inspect, test and document it. Imagine this scenario. The concrete in a slab placed by your subcontractor shows low compressive strength results in the 28-day cylinder tests. Tearing out the slab and replacing it will put you at least a month behind schedule and you don’t want to waste any time before removing and replacing it. Nevertheless, while you’re rebuilding the defective slab, be mindful that you are also building a case. If you plan to recover the costs you incur because of the defective concrete from the responsible parties, you should allow the subcontractor (and possibly the concrete supplier and other implicated parties) to examine, preserve, and/or test the work in question. Failure to do so may subject you to spoliation sanctions and jeopardize your right to recover damages. Read the court decision
Read the full story...
Reprinted courtesy of Curtis Martin, Peckar & Abramson
Mr. Martin may be contacted at cmartin@pecklaw.com

What is a Personal Injury?

September 03, 2019 — Bremer Whyte Brown & O'Meara LLP
Essentially, a personal injury is when an individual is hurt during an accident. Whether driving on the road, walking down the street, or sitting in a chair, accidents happen. When there is an accident, medical treatment may be necessary. Individuals who sustain injuries usually seek compensation for their medical treatment and pain and suffering in the form of a personal injury lawsuit. Personal injury lawsuits can result from a variety of claims including negligence, strict liability, or intentional torts. Yet, for the most part, personal injury lawsuits tend to arise from a claim of negligence. The individual or entity injured in the accident, “Plaintiff”, files a lawsuit against the individual or entity, “Defendant” who allegedly caused harm. Personal injury lawsuits resulting from claims of negligence tend to have two main components: liability and damages. Yet, in order to prevail in a suit for negligence, a Plaintiff must demonstrate the following: (1) a legal duty to use due care, (2) a breach of that duty, (3) a reasonably close, causal connection between that breach and Plaintiff’s resulting injury, and (4) actual loss or damage to Plaintiff. Wylie v. Gresch (1987) 191 Cal.App.3d 412. First, a finding of negligence rests upon a determination that the actor has failed to perform a duty of care owed to the injured party. Ronald S. v. County of San Diego (1993) 16 Cal.App.4th 887. This means that an individual or entity must act reasonably to avoid injuring others. When an injury occurs, a Plaintiff will generally argue that an individual or entity breached a duty owed to them. Read the court decision
Read the full story...
Reprinted courtesy of Bremer Whyte Brown & O'Meara LLP

SEATTLE WASHINGTON BUILDING EXPERT DIRECTORY AND CAPABILITIES