Fairfield Connecticut Building Expert Directory

Heathrow Speeds New-Runway Spending Before Construction Approval

August 13, 2019 — Elena Mazneva - Bloomberg
London’s Heathrow Airport intends to speed up spending on its controversial third runway, even before getting approval for the 14 billion-pound ($18 billion) project, according to the industry regulator. Europe’s busiest airport plans to boost early spending to 2.9 billion pounds, in 2014 prices, so it can stay on schedule for a planned 2026 opening, the Civil Aviation Authority said in a consultation document on its website. The costs will be incurred before the airport wins permission to build the runway, which the operator expects to happen in late 2021, according to the document. The Financial Times reported the plan earlier. Read the court decision
Read the full story...
Reprinted courtesy of Elena Mazneva, Bloomberg

Agree to Use your “Professional Best"? You may Lose Insurance Coverage! (Law Note)

March 01, 2017 — Melissa Dewey Brumback - Construction Law in North Carolina
Yesterday, I was part of a panel at the NC Bar Association Construction Law Winter Meeting, discussing insurance issues for design professionals. One topic we touched on was how to avoid invalidating your insurance. As most of you know, Errors & Omissions insurance (“E&O” coverage) is meant to provide coverage for mistakes you may make in performing your professional architecture or engineering services. E&O coverage is important to protect you in the event of a lawsuit because, as you know, no set of plans is perfect (nor is perfection the standard of care). Be careful, though. Do not promise to provide a higher standard of care than the “professional standard“. If you are asked to sign a contract that states you will use your “professional best,” “best efforts”, “highest care” or similar, you are being asked to sign something that could cost you your E&O coverage. Read the court decision
Read the full story...
Reprinted courtesy of Melissa Dewey Brumback, Ragsdale Liggett PLLC
Ms. Brumback may be contacted at mbrumback@rl-law.com

Georgia Federal Court Says Fact Questions Exist As To Whether Nitrogen Is An “Irritant” or “Contaminant” As Used in Pollution Exclusion

May 20, 2019 — Lawrence J. Bracken II, Michael S. Levine & Alexander D. Russo - Hunton Andrews Kurth
The Southern District of Georgia recently ruled that Evanston Insurance Company is not entitled to summary judgment on whether its policies’ pollution exclusion bars coverage for the release of nitrogen into a warehouse. The case stems from an incident at Xytex Tissue Services, LLC’s warehouse, where Xytex stored biological material at low temperatures. Xytex used an on-site “liquid nitrogen delivery system” to keep the material properly cooled. This system releases liquid nitrogen, which would vaporize into nitrogen gas and cool the biological material. On February 5, 2017, a Xytex employee, Deputy Greg Meagher, entered the warehouse to investigate activated motion detectors and burglar alarms. Deputy Meagher was overcome by nitrogen gas and died as a result. Following Deputy Meagher’s death, his heirs filed suit against Xytex and other defendants. Evanston denied coverage based on the pollution exclusion in its policy. Evanston then brought a declaratory judgment action to confirm its coverage position. In denying Evanston’s summary judgment motion, the Southern District of Georgia reasoned that the type of injury sustained is essential in analyzing whether the pollution exclusion applies. Specifically, Xytex argued, and the court agreed, that the underlying lawsuit alleged that the bodily injury was caused by a lack of oxygen, not exposure to nitrogen. The court also distinguished prior decisions, explaining that injury caused by a lack of oxygen is not a contamination or irritation of the body in the same way as injury resulting from exposure to carbon monoxide or lead. The court also found that Xytex “reasonably expected that liability related to a nitrogen leak would be insured.” Reprinted courtesy of Haight Brown & Bonesteel LLP attorneys Lawrence J. Bracken II, Michael S. Levine and Alexander D. Russo Mr. Bracken may be contacted at lbracken@HuntonAK.com Mr. Levine may be contacted at mlevine@HuntonAK.com Mr. Russo may be contacted at arusso@HuntonAK.com Read the court decision
Read the full story...
Reprinted courtesy of

Meet the Forum's In-House Counsel: RACHEL CLANCY

November 16, 2023 — Jessica Knox - The Dispute Resolver
Company: Lobar, Inc. Email: rachel.clancy@lobar.com Website: www.lobar.com College: York College of Pennsylvania (Bachelor of Science in Marketing, 2001) Graduate School: Florida Institute of Technology (MBA in Acquisition and Contract Management, 2004) Law School: Penn State University, Dickinson School of Law (JD 2007) States Where Company Operates/Does Business: Headquarters are in Dillsburg, PA; construction projects located in Pennsylvania, Maryland, New York, and West Virginia Q: Describe your background and the path you took to becoming in-house counsel. A: Before law school, I spent three years as a Contract Specialist writing construction contracts for the Department of Defense, Naval Facilities Command in New Jersey. I had no idea I'd eventually find my way back to construction. After law school, I spent five years in the business department of a local law firm handling corporate formations, a variety of commercial contracts, and learning some real estate law. After another four years in-house with a data and marketing company in Harrisburg, I accepted my current position with Lobar, where I've been for the last seven years. Read the court decision
Read the full story...
Reprinted courtesy of Jessica Knox, Stinson LLP
Ms. Knox may be contacted at jessica.knox@stinson.com

Lien Release Bonds – Remove Liens, But Not All Liability

February 20, 2023 — Mia Hughes - ConsensusDocs
Lien Release Bonds – Remove Liens, But Not All Liability Among owners and contractors, payment and performance bonds are commonly used together in an effort to mitigate future risk against derivative subcontractor claims. But what happens when despite the effort to mitigate risk, a derivative claimant nevertheless files a mechanics’ lien on the owner’s real property? Not all hope is lost. There is another classification of bond, a “lien release bond”—also commonly referred to as an indemnity bond or a mechanics’ lien bond—which provides protections for real property after a mechanics’ lien has already been filed. The purpose of a lien release bond is to remove claims against the relevant real property. Notably, a lien release bond does not necessarily eliminate all liability of an owner or a general contractor. In number of states, an owner or a general contractor can be held personally liable for derivative claims despite a valid lien release bond. What is a Lien Release Bond? A lien release bond is a specific type of surety bond that removes an existing mechanics’ lien from an owner’s real property. In an effort to protect real property, an owner, or a general contractor, can obtain a lien release bond that will substitute or take the place of a mechanics’ lien. In the event a lien claimant files suit on the mechanics’ lien and seeks to collect on their claim, any proceeds recovered will come from the lien release bond rather than proceeds from the sale or foreclosure of the real property. The threat of mechanics’ liens is always present on a construction project— it is estimated that over 60,000 mechanics liens were filed in 2021 alone. Lien release bonds are an added layer of protection for an owner’s real property against a pending mechanics’ lien. Read the court decision
Read the full story...
Reprinted courtesy of Mia Hughes, Jones Walker LLP (ConsensusDocs)
Ms. Hughes may be contacted at mhughes@joneswalker.com

Zero-Net Energy Homes Costly Everywhere but at the Electric Meter

August 27, 2013 — CDJ STAFF
On one hand, your walls are about nine inches thick. On the other hand, your heating and cooling costs are nonexistent. Greenhill Contracting is building “zero-net energy” homes in New Paltz, New York. The homes are designed to create more power than they consume. In addition to the walls, which WDTN News describes as “castle thick,” the homes include solar panels, triple-glazed windows, and geothermal heating and cooling systems. The cost for a three-bedroom home in this development starts at about $400,000. Meritage Homes is offering net-zero as an option on its homes. Based in Arizona, Meritage builds homes across the country. Another national builder, Shea Homes, calls its net-zero option “SheaXero,” and has built about a thousand in four western states and in Florida. One Arizona homeowner notes that she runs her air conditioner constantly, but “I still have never paid more than $18 and some change.” Sometimes she even gets a credit. Read the court decision
Read the full story...
Reprinted courtesy of

Houston Home Sales Fall for the First Time in Six Months

March 19, 2015 — John Gittelsohn and Prashant Gopal - Bloomberg
(Bloomberg) -- Houston home sales fell in February for the first time in six months, a sign lower oil prices are spooking buyers. Sales of single-family houses dropped 5.8 percent from a year earlier to 4,521 homes, the Houston Association of Realtors reported Wednesday. Purchases fell among residences costing less than $150,000 because of tight supply, and among properties selling for more than $500,000 as wealthier buyers paused amid economic uncertainty, said James Gaines, research economist at Texas A&M University’s real estate center. “They don’t know what the real impact of falling oil prices is,” Gaines said in a telephone interview from College Station, Texas. “We’re living in the twilight of uncertainty.” Reprinted courtesy of John Gittelsohn, Bloomberg and Prashant Gopal, Bloomberg Mr. Gittelsohn may be contacted at johngitt@bloomberg.net Mr. Gopal may be contacted at pgopal2@bloomberg.net Read the court decision
Read the full story...
Reprinted courtesy of

MGM Begins Dismantling of the Las Vegas Harmon Tower

June 26, 2014 — Beverley BevenFlorez-CDJ STAFF
MGM has begun to dismantle the $8.5 billion, incomplete Harmon Hotel in Las Vegas, Nevada, according to the Las Vegas Review-Journal. The demolition process is expected to take up to a year. The Las Vegas Review-Journal reported that construction of the tower was halted in 2008 after construction defects were allegedly discovered. Later, “the building was deemed structurally unsound.” “Instead of blowing the building up in grand fashion, contractors hired by MGM Resorts are now removing scrap metal and other materials from the building, along with taking off the blue-tinged glass that has covered the structure for the last five years,” Howard Stutz wrote in the Las Vegas-Review Journal. “The process also includes installing pedestrian protection systems outside the structure above adjacent sidewalks and walkways.” Read the court decision
Read the full story...
Reprinted courtesy of

FAIRFIELD CONNECTICUT BUILDING EXPERT DIRECTORY AND CAPABILITIES