Construction Defects #10 On DBJ’s Top News Stories of 2015
December 10, 2015 —
Beverley BevenFlorez-CDJ STAFFThe Denver Business Journal’s top 15 news stories of 2015 covers the “Battle Over Construction Defects.” Some developers and other groups have blamed the lack of condominium development in Denver and other Colorado cities on the state’s defect laws.
After a construction-defects reform bill failed to pass the Colorado Legislature, several cities passed construction defect-related ordinances, according to the Denver Business Journal: “In November the Denver City Council voted 12-1 to approve an ordinance aimed at making it harder to file class-action lawsuits over construction defects within the city.”
Read the court decisionRead the full story...Reprinted courtesy of
The Anatomy of a Construction Dispute- The Claim
December 02, 2015 —
Christopher G. Hill – Construction Law MusingsA new year brings with it promise and challenges. The promise is a relatively clean slate and the thought that 2015 will be a great year for construction professionals and those that assist them. The challenges come from the almost inevitable issues that can arise on a construction site with its many moving parts and enough potential pitfalls to make even the most optimistic construction attorney, contractor, subcontractor or supplier think that Murphy was an optimist.
In order to assist with the potential challenges, this post will be the first in a series of “musings” on the best way to handle a payment dispute arising from a construction contract. This week’s post will discuss what the first steps should be once a payment dispute or claim arises. We’ll assume that you, as a construction contractor, have taken early advantage of the services of a construction lawyer and have carefully reviewed your contract for issues before signing that contract.
Read the court decisionRead the full story...Reprinted courtesy of
Christopher G. Hill, Law Office of Christopher G. Hill, PCMr. Hill may be contacted at
chrisghill@constructionlawva.com
Ordinary Use of Term In Insurance Policy Prevailed
June 08, 2020 —
David Adelstein - Florida Construction Legal UpdatesThere are cases where you feel for the plaintiff, but understand why they did not prevail, despite the creative efforts of their counsel. The case of Robinson v. Liberty Mutual Ins. Co., 958 F.3d 1137 (11th Cir. 2020) is one of these cases.
In Robinson, the plaintiff moved into a home that turned out to be infested with a highly venomous spider. Efforts to eradicate the spider proved unsuccessful and the spider apparently infested the entire home. The plaintiff made a claim under their homeowner’s property insurance policy arguing that their home suffered a physical loss caused by the spider infestation as the spider presented an irreparable condition that rendered the home unsafe for occupancy. (It probably did!). The property insurer denied coverage because the policy had an insurance exclusion for loss caused by birds, vermin, rodents, or insects.
The insurer claimed the spider is an insect or vermin and, therefore, there is no coverage based on the exclusion. The insured creatively argued that “scientifically speaking” a spider is an arachnid and not an insect. Neither the trial court nor the Eleventh Circuit found this argument persuasive.
Read the court decisionRead the full story...Reprinted courtesy of
David Adelstein, Kirwin Norris, P.A.Mr. Adelstein may be contacted at
dma@kirwinnorris.com
The 2021 Top 50 Construction Law Firms™
June 14, 2021 —
Cybele Tamulonis - Construction ExecutiveVaccination rates continue to rise, mandates are loosening for returning to work and school, and a $2 trillion infrastructure bill is looming on the horizon, but contractors remain cautious and counseled by the legal experts who thrive in the complex field of construction law.
According to the latest report by the Bureau of Labor Statistics, construction employment numbers did not move much in April despite an increased demand for housing and a recovering economy. Due to continued fallout from the pandemic—and what seems like no end in sight for the rising costs of materials—contractors have been turning to construction law firms to navigate delayed projects, interpret contract language, assist in risk mitigation and ensure the road ahead is paved with understandable and protective clauses.
For the 2021 survey for the annual U.S. ranking of The Top 50 Construction Law Firms™, Construction Executive’s editorial team reached out to dozens of attorneys at the nation’s best construction law firms to learn how the legal landscape is changing, as well as how legal teams are aiding clients with sharpening contract language and pivoting in response to challenges in the wake of the COVID-19 pandemic.
Reprinted courtesy of
Cybele Tamulonis, Construction Executive, a publication of Associated Builders and Contractors. All rights reserved.
Read the court decisionRead the full story...Reprinted courtesy of
Construction Mediation Tips for Practitioners and 'Eyes Only' Tips for Construction Mediators
December 05, 2022 —
Stacy L. La Scala - Construction ExecutiveConstruction mediation can occur during or after construction and prior to or during arbitration or litigation. But, regardless of when a construction mediation occurs, its success often depends on the parties’ willingness to exchange critical information well in advance of the mediation session.
Tips for the Construction Practitioner
- Schedule a mandatory pre-session call.
A pre-session call with the mediator is the first and most effective opportunity to convey your client’s position and to allow the mediator to absorb and evaluate that information without distraction. On that call, counsel should describe the dispute and identify the decision-makers. Additionally, counsel should address the following questions:
- Are the parties working together and sharing information, or are they at war?
- Have the parties shared expert information?
- Have demands been published?
- Will the parties be publishing their briefs?
- What confidential information is not in the mediation brief?
- Will the decision-makers be participating? Are there any decision-makers who are not available or “behind the scenes”?
Reprinted courtesy of
Stacy L. La Scala, Construction Executive, a publication of Associated Builders and Contractors. All rights reserved.
Read the court decisionRead the full story...Reprinted courtesy of
SFAA Commends Congress for Maintaining Current Bonding Protection Levels in National Defense Authorization Act (NDAA)
December 20, 2021 —
The Surety & Fidelity Association of AmericaDecember 15, 2021 (WASHINGTON, DC) – The Surety & Fidelity Association of America (SFAA), a nonprofit, nonpartisan trade association representing all segments of the surety and fidelity industry, commends the U.S. Senate and House for passing the National Defense Authorization Act (NDAA) for Fiscal Year 2022, and including Section 877, which exempts the Miller Act from periodic indexing for inflation. SFAA would like to thank Miller Act exemption bill sponsors, Representatives Nydia Velazquez (D-NY) and Byron Donalds (R-FL), as well as Senators Robert Portman (R-OH), Gary Peters (D-MI) and Mazie Hirono (D-HI), for their leadership and commitment on the passage of this bill.
Exempting the Miller Act from periodic indexing for inflation ensures essential payment protections remain in place for subcontractors, suppliers, and workers on all federal construction contracts subject to the Miller Act. The exemption also ensures performance protections for taxpayers will remain in place on federal construction contracts of $150,000 and more.
For over 80 years, the federal Miller Act has protected taxpayers against risk of loss by requiring payment and performance bonds on federal construction contracts. President Biden is expected to sign the NDAA into law in the coming days.
The Surety & Fidelity Association of America (SFAA) is a nonprofit, nonpartisan trade association representing all segments of the surety and fidelity industry. Based in Washington, D.C., SFAA works to promote the value of surety and fidelity bonding by proactively advocating on behalf of its members and stakeholders. The association’s more than 450 member companies write 98 percent of surety and fidelity bonds in the U.S. For more information visit www.surety.org.
Read the court decisionRead the full story...Reprinted courtesy of
AGC Seeks To Lead Industry in Push for Infrastructure Bill
May 01, 2019 —
Jennifer Seward - Engineering News-RecordThe ongoing call for better infrastructure funding, along with workforce innovation and an enhanced focus on diversity and inclusivity, is taking center stage at the Associated General Contractors of America. The association’s leaders emphasized that these issues are crucial to the industry’s future as more than 2,800 attendees gathered for AGC’s annual convention in Denver April 1-4.
Read the court decisionRead the full story...Reprinted courtesy of
Jennifer Seward, ENRENR may be contacted at
ENR.com@bnpmedia.com
An Overview of the New EPA HVAC Refrigerant Regulations and Its Implications for the Construction Industry
September 30, 2024 —
Stefanie A. Salomon, Nadia Ennaji & Ali Heyat - Peckar & Abramson, P.C.The U.S. Environmental Protection Agency (EPA) recently announced a series of significant changes to the rules governing the use of refrigerants in heating, ventilation, and air conditioning (HVAC) systems. These changes, which were promulgated under the American Innovation and Manufacturing (AIM) Act, are designed to phase down the use of hydrofluorocarbons (HFCs), a class of potent greenhouse gases.
The AIM Act: A Game-Changer for HVAC Industry
The recent changes to refrigerant regulations by the EPA signify a substantial shift in environmental policy that will have profound implications for the construction industry. For the construction industry, this means a transition to next-generation technologies that do not rely on HFCs. The AIM Act’s sector-based restrictions will affect a wide range of equipment, including refrigeration and air conditioning systems integral to building design and function.
Starting January 1, 2025, the manufacturing or importing of any product in specified sectors that uses a regulated substance with a global warming potential of 700 or greater is prohibited (40 C.F.R. § 84.54(a)). The specified sectors listed include R-410A, the most common refrigerant used in the HVAC industry. The installation of systems using a regulated substance with a global warming potential of 700 or greater in specified sectors is allowed until January 1, 2026, provided that all system components are manufactured or imported before January 1, 2025. See 40 C.F.R. § 84.54 (c). “Installation” of an HVAC system is defined as the completion of assembling the system’s circuit, including charging it with a full charge, such that the system can function and is ready for its intended purpose. See 40 C.F.R. § 84.52.
Reprinted courtesy of
Stefanie A. Salomon, Peckar & Abramson, P.C. and
Nadia Ennaji, Peckar & Abramson, P.C.
Ms. Salomon may be contacted at ssalomon@pecklaw.com
Ms. Ennaji may be contacted at nennaji@pecklaw.com
Read the court decisionRead the full story...Reprinted courtesy of