Fairfield Connecticut Building Expert Directory

Rhode Island Closes One Bridge and May Have Burned Others with Ensuing Lawsuit

October 07, 2024 — Bill Wilson - Construction Law Zone
The state of Rhode Island recently filed a lawsuit against 13 companies that provided design, construction, and inspection services over the past ten years (the extent allowed by the applicable statute of limitations) to the Washington Bridge, which carries I-195 between East Providence and Providence. The bridge was abruptly closed in December 2023 following the discovery of alleged fractured steel tie-downs critical to the bridge’s stability and additional deterioration in cantilever beams throughout the bridge. Before the closure, approximately 90,000 vehicles per day traveled over the bridge. The complaint alleges that the defendants, the majority of which are experienced, industry-leading firms in their respective fields, were negligent and breached their respective contracts with the State. The State contends that every company that worked on the bridge over the past ten years missed the serious structural conditions alleged. The lawsuit also claims that the State has suffered millions of dollars of damages since the bridge was closed and seeks indemnity and contribution from all defendants to the extent that the State may be liable to third parties in the future. Read the court decision
Read the full story...
Reprinted courtesy of Bill Wilson, Robinson & Cole LLP

Assessing Defective Design Liability on Federal Design-Build Projects

March 22, 2021 — Dirk Haire, Adam Hamilton & Dana Molinari - ConsensusDocs
A common misconception by many government officials is that a design-builder is always responsible for every design error or omission on a design-build project. This article examines the actual liability standard applied by the courts and boards of contract appeals when a design defect arises on a federal design-build project. Background: Design-Build Contracts and the Spearin Doctrine Design-build contracts combine the design and construction elements of a construction project into one contract. Design-build contracts often include two types of specifications: design and performance. Design specifications may set forth various parameters, such as precise measurements, tolerances, and materials. In doing so, the specifications create a fixed “roadmap” governing a contractor’s performance of the project. Performance specifications, on the other hand, set forth “operational characteristics” to achieve a particular objective or standard, but generally leave the details to the contractor. Reprinted courtesy of Dirk Haire, Fox Rothschild LLP, Adam Hamilton, Fox Rothschild LLP and Dana Molinari, Fox Rothschild LLP Mr. Haire may be contacted at dhaire@foxrothschild.com Mr. Hamilton may be contacted at ahamilton@foxrothschild.com Ms. Molinari may be contacted at dmolinari@foxrothschild.com Read the court decision
Read the full story...
Reprinted courtesy of

HP Unveils Cheaper, 3-D Printing System to Spur Sales

November 05, 2014 — Jack Clark - Bloomberg
Hewlett-Packard Co. (HPQ) unveiled a new 3-D-capable computer and speedier 3-D printer technology as it prepares to spin off its personal-computer and printer businesses into a stand-alone company. The company today introduced Sprout, an $1,899 computer that lets people scan and manipulate 2-D and 3-D objects. It will be available early next month online and in some U.S. stores. Hewlett-Packard also said new 3-D printer technology will make the process cheaper and faster than competitors. The Palo Alto, California-based company is betting that 3-D technology will help revitalize sales and spur growth in the printer industry. More than 2.3 million 3-D printers will ship in 2018, up from about 108000 this year, according to researcher Gartner Inc. Earlier this month, Hewlett-Packard said it would split into two companies by late 2015, with one focused on corporate hardware services and the other -- dubbed HP Inc. -- on PCs and printers. Read the court decision
Read the full story...
Reprinted courtesy of Jack Clark, Bloomberg
Mr. Clark may be contacted at jclark185@bloomberg.net

Coverage Denied for Insured's Defective Product

October 15, 2014 — Tred R. Eyerly – Insurance Law Hawaii
The court found there was no coverage obligations for the insured's defective product. Titanium Indus., Inc. v. Federal. Ins. Co., 2014 WL 4428324 (N.J. Super. Ct. App. Div. Sept. 10, 2014). The insured, Titanium Industries, supplied titanium bar materials to Biomet Manufacturing Corporation. Biomet manufactured orthopedic implants and devises. The titanium was used to manufacture screws to incorporate into Biomet's products. Biomet notified the insured of a potential defect in some of the titanium material, described as "alloy segregation," i.e., the failure of alloys in a metal to completely melt, causing the alloy to separate and undermine the strength of the finished product. The insured and Biomet negotiated a settlement, which included lost profits and the cost of returning the titanium. Read the court decision
Read the full story...
Reprinted courtesy of Tred R. Eyerly, Insurance Law Hawaii
Mr. Eyerly may be contacted at te@hawaiilawyer.com

Be Wary of Construction Defects when Joining a Community Association

February 07, 2013 — CDJ STAFF
There are some benefits to living in small developments with correspondingly small community association. Marilyn Briscoe told the Chicago Tribune that in her 34-unit town home association, "people kind of look out for each other here." But the article also cautions to not only meet the other owners, but that you should "know the developer" and "be leery if you discover litigation for construction defects." Ryan Shpritz, an association attorney said that "you don't want to start out your new association by spending money on lawyer fees or repairing defects." Whether the development is large or small, "having construction defect litigation going on will have an impact on salability." Read the court decision
Read the full story...
Reprinted courtesy of

You Are Not A “Liar” Simply Because You Amend Your Complaint

March 14, 2022 — David Adelstein - Florida Construction Legal Updates
In litigation, it is common for a plaintiff to amend their complaint. They may amend to add additional parties. To add new claims. To change the factual allegations. Or, to change the theme of their case. Most of the time, complaints are not verified by the plaintiff. Instead, complaints are drafted and signed by the plaintiff’s counsel. A question becomes: how prior reiterations of a complaint can be used against the plaintiff to show they are a bunch of “liars” by making amendments to their complaint. Sounds prejudicial to the plaintiff, right? Particularly if there is a jury. The reality is that amending complaints for various reasons is routine. Doing so does NOT make the plaintiff a liar and is not a vehicle that a defendant should use to create this inference. A defendant that tries to do so simply wants to detract from the substantive facts and issues. Read the court decision
Read the full story...
Reprinted courtesy of David Adelstein, Kirwin Norris, P.A.
Mr. Adelstein may be contacted at dma@kirwinnorris.com

You Can Take This Job and Shove It!

June 10, 2015 — Garret Murai – California Construction Law Blog
That’s it. You’ve had it. They can take their job and shove it! But can you really tell an owner on a construction project to proverbially shove it where the sun don’t shine? Well, far be it for me to tread on your First Amendment Rights or stick my nose into the subsequently brought public disturbance charges against you. But can you legally tell an owner to shove it, and that you’re no longer going to perform work on their [insert expletive] project? Well, indeed you can, in limited circumstances, and it’s called a “Stop Work Notice.” Note: A stop work notice is different from a stop payment notice. What is a stop work notice? A stop work notice is a notice given by a direct contractor to a project owner that the contractor will stop work if an amount owed to the contract is not paid within 10 days after notice is given. Read the court decision
Read the full story...
Reprinted courtesy of Garret Murai, Wendel Rosen Black & Dean LLP
Mr. Murai may be contacted at gmurai@wendel.com

Care, Custody or Control Exclusion Requires Complete and Exclusive Control by Insured Claiming Coverage

July 30, 2019 — Christopher Kendrick & Valerie A. Moore – Haight Brown & Bonesteel LLP
In McMillin Homes Construction v. Natl. Fire & Marine Ins. Co. (No. D074219, filed 6/5/19) a California appeals court held that a “care, custody or control” exclusion did not bar coverage for defense of a general contractor as an additional insured under a subcontractor’s policy, because the exclusion requires exclusive control, but the facts and allegations posed a possibility of shared control with the subcontractor. McMillin was the general contractor on a housing project and was added as an additional insured to the roofing subcontractor’s policy pursuant to the construction subcontract. The homeowners sued, including allegations of water intrusion from roof defects. McMillin tendered to the roofing subcontractor’s insurer, which denied a defense based on the CGL exclusion for damage to property within McMillin’s care, custody or control. In the ensuing bad faith lawsuit, McMillin argued that the exclusion required complete or exclusive care, custody or control by the insured claiming coverage, which was not the case for McMillin. The insurer argued that the exclusion said nothing about complete or exclusive care, custody or control. Further, the intent to exclude coverage for damage to any and all property in McMillin’s care, custody or control, to whatever degree, was demonstrated by the fact that the additional insured endorsement in question was not an ISO CG2010 form, but a CG2009 form, which expressly adds a care, custody or control exclusion to the additional insured coverage not found in the CG2010 form. The argument was that the CG2009 form evidences an intent to conclusively eliminate coverage for property in the additional insured’s care, custody or control. In addition, the insurer argued that this result was also reinforced by its inclusion of an ISO CG2139 endorsement in the roofer’s policy, which eliminated that part of the “insured contract” language of the CGL form, defining an “insured contract” as “[t]hat part of any other contract or agreement pertaining to your business . . . under which you assume the tort liability of another party to pay for ‘bodily injury’ or ‘property damage’ to a third person or organization.” The insurer’s argument was that by having eliminated coverage for contractual indemnity or hold harmless agreements, it had “closed the loop” of eliminating additional insured coverage for construction defect claims. Reprinted courtesy of Christopher Kendrick, Haight Brown & Bonesteel LLP and Valerie A. Moore, Haight Brown & Bonesteel LLP Mr. Kendrick may be contacted at ckendrick@hbblaw.com Ms. Moore may be contacted at vmoore@hbblaw.com Read the court decision
Read the full story...
Reprinted courtesy of

FAIRFIELD CONNECTICUT BUILDING EXPERT DIRECTORY AND CAPABILITIES