Withholding Payment or Having Your Payment Withheld Due to Disputes on Other Projects: Know Your Rights to Offset
January 04, 2021 —
Christopher C. Broughton, Jones Walker LLP - ConsensusDocsIntroduction
The right to offset refers to the common sense ability to reduce or eliminate your payment obligations to a party who owes you money on another contract. With offsets, common law largely tracks common sense. The right of offset is recognized by statute and court decisions in many states as well as under federal law and the U.S. Bankruptcy Code. The right to offset can also be established in the contract or subcontract.
But like many things that may seem simple, the right to offset can easily become complex. This article provides an overview of the extent and limits of the right to offset varies from state to state and with federal government contracts about the extent and limits of the right of offset. Construction trust fund statutes add another layer of complications.
These variations may not be obvious or intuitive, but they have a tremendous impact on your right to get paid or your right to withhold payment. Because of the variations, you must always confirm the law applicable to your contract or subcontract, which may not be where the project or you are located.
Read the court decisionRead the full story...Reprinted courtesy of
Christopher C. Broughton, Jones Walker LLPMr. Broughton may be contacted at
cbroughton@joneswalker.com
Daily Reports – The Swiss Army Knife of Project Documentation
June 08, 2020 —
Christopher A. Henry - ConsensusDocsProject “Daily Reports” are some of the most important, yet overlooked aspects of a construction project. These reports serve many beneficial roles such as holding parties accountable to their obligations, providing the basis for an as-built schedule, recording manpower, documenting site conditions, and recording any other important and relevant information that happened on the job site that day. Daily reports can also provide information to help with claims or disputes that may arise in the future, such as noting weather delays, providing backup for future delay claims, and providing information to dispute claims made against your company. Finally, daily reports also serve as a useful communication tool during the project and a source of real time information for parties that want to know how the work is commencing on a day to day basis. Because daily reports are the “Swiss army knife” of project documentation, it is extremely important that a contractor puts for its best effort when creating them.
It is no secret that a construction project can become more chaotic as the schedule progresses. Unfortunately, when that is the case, the effort put into creating these reports drops off and sometimes the responsibility of creating such reports is thrown aside altogether. I can speak from experience. Prior to entering the practice of law, I was a project engineer for a general contractor in Atlanta. As an engineer in the field, one of my many responsibilities was to enter the daily reports. Based off this experience, below are some thoughts on how to prepare useful daily reports.
1. Check the contract. The contract you entered may set forth specific requirements for the daily reports, such as where to file them, the required format, and specific information that must be included. Complying with contractual requirements is necessary for a successful project. One word of caution for subcontractors, a subcontract will often incorporate the prime contract. If that is the case, be sure to check the prime contract for any specific language relating to daily reports.
Read the court decisionRead the full story...Reprinted courtesy of
Christopher A. Henry, Jones Walker LLP Mr. Henry may be contacted at
chenry@joneswalker.com
Colorado Chamber of Commerce CEO Calls for Change to Condo Defect Law
March 05, 2015 —
Beverley BevenFlorez - CDJ STAFFAccording to the Denver Business Journal, Dennis Houston, president and CEO of the Parker Chamber of Commerce in Colorado, spoke at the state’s capitol recently, calling legislators “to make it harder for attorneys to file class-action lawsuits against condominium builders so that areas like his can attract a workforce of millennials.” Houston and other Chamber of Commerce leaders gathered at the capitol “to lobby for sensible energy policies and construction defects reform, among other things.”
Read the court decisionRead the full story...Reprinted courtesy of
CSLB Reminds California Public Works Contractors to Renew Their Public Works Registration
October 02, 2015 —
Garret Murai – California Construction Law BlogA friendly reminder from the Contractors State License Board . . .
CSLB Urges Public Works Contractors to Renew Dept. of Industrial Relations Registration before October 1 to Avoid Hefty Penalty
SACRAMENTO — A mandatory renewal deadline is approaching for licensees who work on public works projects. Contractors whose registration with the California Department of Industrial Relations (DIR) expired June 30, 2015, and have ongoing public works projects or plan to bid on new ones, must pay the $300 renewal fee
before October 1, 2015, or face an additional $2,000 late penalty after that date.
As a result of
Senate Bill (SB) 854, all contractors have been required since April 1, 2015, to register with DIR to be awarded a public works contract, even if the project did not go out to bid.
Read the court decisionRead the full story...Reprinted courtesy of
Garret Murai, Wendel Rosen Black & Dean LLPMr. Murai may be contacted at
gmurai@wendel.com
Allocating Covered and Uncovered Damages in Jury Verdict
March 01, 2021 —
David Adelstein - Florida Construction Legal UpdatesWhen a liability insurer defends an insured from a third-party claim, they oftentimes do so under a reservation of rights. A reservation of rights letter is issued to the insured that identifies certain coverage exclusions or reservations relative to the insurance policy that may impact the insurer’s duty to indemnify the insured for damages. In other words, just because the insurer is defending its insured does not mean it will be indemnifying its insured for damages asserted in the third-party claim.
Under Florida law, the party claiming insurance coverage has the initial burden to show that a settlement or judgment represents damages that fall within the coverage provisions of the insurance policy. An insured’s inability to allocate the amount of a judgment between covered and uncovered damages is therefore generally fatal to its indemnification claim. However, the burden of apportioning or allocating between covered and uncovered damages in a general jury verdict may be shifted to the insurer if the insurer did not adequately make known to the insured the availability and advisability of a special verdict.
QBE Specialty Ins. Co. v. Scrap Inc., 806 Fed.Appx. 692, *695 (11th Cir. 2020) (internal citations omitted).
Read the court decisionRead the full story...Reprinted courtesy of
David Adelstein, Kirwin Norris, P.A.Mr. Adelstein may be contacted at
dma@kirwinnorris.com
Wilke Fleury ranked in Best Lawyers’ Best Law Firms!!
December 03, 2024 —
Wilke Fleury LLPWilke Fleury is pleased to announce its inclusion in the 2025 edition of ‘Best Law Firms’ ranked by Best Lawyers! Firms included in the 2025 “Best Law Firms” list are recognized for professional excellence with persistently impressive ratings from clients and peers. Achieving a tiered ranking signals a unique combination of quality law practice and breadth of legal expertise.
Read the court decisionRead the full story...Reprinted courtesy of
Wilke Fleury LLP
Design, Legal and Accounting all Fight a War on Billable Hours After the Advent of AI
June 10, 2024 —
Jeff Yoders - Engineering News-RecordBillable hours have long been the professional services standard by which architects, engineers, lawyers and accountants all get paid. But What if that effort wasn’t from human toil at all? Artificial Intelligence is already chipping away at the venerable billable hours business model, completing in just minutes or seconds tasks that would take humans hours. As these tools grow more efficient and accurate, many firms are having to reevaluate how they allocate their resources, and project delivery practices may have to evolve as well.
Reprinted courtesy of
Jeff Yoders, Engineering News-Record
Mr. Yoders may be contacted at yodersj@enr.com
Read the full story... Read the court decisionRead the full story...Reprinted courtesy of
Milhouse Engineering and Construction, Inc. Named 2022 A/E/C Building a Better World Award Winner
September 12, 2022 —
Milhouse Engineering and Construction, Inc.CHICAGO, IL, Sept. 07, 2022 (GLOBE NEWSWIRE) -- PSMJ has awarded Milhouse Engineering and Construction, Inc. (Milhouse) their 2022 Building a Better World award. This recognition is given to a firm in the Architecture, Engineering, and Construction industries that significantly and positively impacts the communities they serve. This highly regarded award is chosen by a panel of industry visionaries and leaders based on the impact and nature of the activities completed by the organization.
"Firms nominated for an A/E/C Building a Better World Award come in all sizes, from less than 10 architects to over 10,000 civil engineers. What they share is a realization that giving time and resources to those less fortunate is the right thing to do. And more and more, the most sought-after candidates for open positions are judging firms on their level of corporate social responsibility," says Frank A. Stasiowski, FAIA, Founder and CEO of PSMJ Resources, Inc.
In 2012, Milhouse established
Milhouse Charities, the 501c3 non-profit arm of the Milhouse family of companies. Milhouse Charities supports the Milhouse vision "to be a positive impact" by supporting the education, exposure and advancement of underrepresented youth and minorities in science, technology, engineering and math (STEM). Since its founding in 2012, Milhouse Charities has invested over $1 Million and 7,000 hours of community service into STEM, resource, and mentorship programs. The organization has made a global impact having done service in Illinois, Indiana, Pennsylvania, New York, Atlanta, and throughout Africa.
About Milhouse Engineering and Construction, Inc.
Milhouse Engineering and Construction, Inc. is a full-service engineering firm offering expertise in civil, mechanical, electrical, structural and environmental engineering, as well as construction and program management. We deliver creative solutions to complex problems around the globe. Driven by our diverse perspectives, we challenge the status quo to pursue a brighter future for the communities we serve. Milhouse has been named a 'Best & Brightest Companies to Work For' for 17 years in a row and is ranked as an 'ENR Top 500 Design Firm'. Follow us on
LinkedIn and
Facebook.
Read the court decisionRead the full story...Reprinted courtesy of