FIFA May Reduce World Cup Stadiums in Russia on Economic Concern
July 16, 2014 —
Tariq Panja – BloombergFIFA may reduce the number of stadiums used to host the 2018 World Cup in Russia on concern that their economic viability after the monthlong event ends.
FIFA President Sepp Blatter said a day after Germany’s 1-0 win over Argentina in the final that a delegation from soccer’s governing body will meet Russian tournament organizers in September to discuss plans for the next edition.
Blatter gave a mark of 9.25 out of 10 to an “exceptional” Brazil World Cup, which cost $11 billion to stage. The tournament is a difficult challenge for organizers, Blatter said, illustrated by construction delays at almost all of the 12 arenas used for the 64 games in Brazil.
“The World Cup has taken such a dimension that the organization is hard work for the organizing country and also for FIFA,” Blatter told reporters at Rio de Janeiro’s Maracana stadium, where Germany claimed a fourth title and became the first European country to win the tournament in South America.
Read the court decisionRead the full story...Reprinted courtesy of
Tariq Panja, BloombergMr. Panja may be contacted at
tpanja@bloomberg.net
Los Angeles Wildfires Rage on, Destroying Structures and Displacing Residents
January 14, 2025 —
Aileen Cho - Engineering News-RecordWildfires in Los Angeles have already destroyed thousands of buildings, but the full extent of the damage will not be known for some time, according to local officials during a media briefing Jan. 9.
Read the court decisionRead the full story...Reprinted courtesy of
Aileen Cho, Engineering News-RecordMs. Cho may be contacted at
choa@enr.com
10 Safety Tips for General Contractors
October 09, 2018 —
Eric Weisbrot – JW Surety BondsThe construction industry continues to grow each year, paving the way for general contractors to make a profitable, sustainable living when the job is done right. However, to do so effectively, safety standards need to be met with consistency and focus on each worksite. General
contractors who are licensed and bonded must take proactive steps to avoid potentially fatal injuries among their subcontractors and employees, even though this may be easier said than done. To create and maintain a safe worksite each and every time, general contractors should consider how to implement the following best practices and safety tips on the job.
1 – Know the Risks
The most crucial step toward maintaining a safe construction site is to first be aware of the risks involved. Each year, thousands of
construction workers experience injuries on the job, and some ultimately lose their life because of safety missteps at work. As a general contractor, it is your responsibility to know that construction risks run rampant given the nature of the work. Being tuned into the potential for falls, slips, and other common safety-related incidents is a necessary part of operating a safe worksite for you and your employees.
2 – Require Protective Gear
An often overlooked safety precaution on construction sites is the use of up-to-date and well-maintained protective gear. For many subcontractors and employees, it is easy to skip this necessary step in safeguarding themselves from potential safety issues. However, general contractors can take steps to make protective gear a requirement on the job. This may include mandating hardhats and steel-toed shoes, gloves, and eyewear when appropriate. All visitors and workers on a construction site should follow protective gear instructions to avoid unnecessary safety risks.
3 – Educate on Ladder Safety
According to the Bureau of Labor Statistics, ladder injuries account for a significant number of construction worker incidents each year, making up more than 200,000 accidents on average. Ladders have continuously ranked high on OSHA’s list of violations at construction sites because the prevalence of injuries is so high. General contractors can help thwart ladder-related injuries among workers by promoting ladder safety training, including reminders about the right ladder to use for each task. Workers should also be well aware of the importance of inspection before use, and they should always follow the three points of contact rule when going up or down a ladder.
4 – Recognize Equipment Pitfalls
Many construction workers experience injuries relating to equipment used on the job. This could be tied to getting on or off equipment, or loading and unloading materials from machinery. In any case, general contractors can encourage simple tactics to improve equipment safety measures. Paying close attention to secure footing while getting on or off a machine, having more than one person assist with loading and unloading, and ensuring everyone feels comfortable asking for help with these tasks reduces safety risks.
5 – Document Potential Hazards
A general contractor’s main responsibility is to manage the construction site efficiently from start to finish. Part of this duty is recognizing the possible issues on a worksite that may lead to accidents or injuries if not addressed at the beginning of a project. It is necessary to take the time to identify safety risks such as unstable working surfaces, dangerous trenches, or weather-related concerns that may impact the safety of subcontractors, suppliers, or other site visitors. Potential hazards should be documented and shared with site workers, and they should be updated as the project progresses.
6 – Maintain Equipment and Tools
Poorly maintained equipment and tools also cause issues on construction sites. The Infrastructure Health and Safety Association suggests that general contractors
remind workers to inspect tools, machines, handheld equipment, and vehicles before each use to ensure they are properly maintained. Additionally, understanding the maintenance standards for certain tools or equipment and following those guidelines is crucial to reducing injury on the job.
7 – Minimize Crowds
Crowded work areas can be a serious safety issue for general contractors, subcontractors, and vendors and suppliers on site. It is common for crowds to gather during the use of heavy equipment or when a significant task is being completed. However, general contractors should discourage crowd-forming for spectating purposes. This can be done by limiting the number of people allowed to be in an area when certain activities are taking place, and enforcing these rules at every possible opportunity.
8 – Hire Licensed Subcontractors
General contractors may have full- or part-time employees as part of their business model, or there may be a heavy presence of subcontractors not directly tied to the main business. In either case, it is essential to have faith in the capabilities of workers, including their willingness and commitment to follow safety standards. General contractors can help ensure each worker is more likely to take safety seriously when they hire licensed contractors who follow through with
licensing requirements as mandated by the state or city.
9 – Focus on Training
Even after vetting subcontractors and employees based on their licensing status, general contractors also need to ensure training and education are a priority. Several online and in-person courses focus on construction safety training which workers should be encouraged to attend. Safety
education programs from OSHA and other reputable sources are crucial to decreasing accidents on the job.
10 – Be Present
Finally, general contractors can only have an impact on the safety of the job site when they are purposefully present. It is common for some GCs to stop by a project when they are needed or to check on progress periodically. However, new safety hazards, lacking worker training, and other risks are not easily fixed when the general contractor is not consistently on site. Reducing the potential for falls, slips, trips, and fatalities on the job requires communication with workers, and that takes place most effectively when general contractors are in person.
Eric Weisbrot is the Chief Marketing Officer of JW Surety Bonds. With years of experience in the surety industry under several different roles within the company, he is also a contributing author to the surety bond blog.
Read the court decisionRead the full story...Reprinted courtesy of
Reminder: Pay if Paid Not All Encompassing (but Could it be?)
December 09, 2019 —
Christopher G. Hill - Construction Law MusingsOn numerous occasions, I have discussed the need to be careful with so called “pay if paid” clauses in construction contracts. While such clauses are enforceable in Virginia (when phrased correctly), there are exceptions and limitations (for instance in the Miller Act context).
One such exception (that I frankly would have thought to be obvious) is that such clauses do not protect a general contractor from paying all subcontractors. Such a clause only protects a general contractor from payment to those subs for whose work the general contractor has not been paid. In other words, if a general contractor has been paid by an owner for a particular subcontractors work, it cannot use the pay if paid clause to deny payment even in the event that other subcontractors were deficient in their work or the owner has failed to pay the general contractor in full.
In Precision Contractors Inc. v. Masterbuilt Companies Inc. (PDF) the Fairfax, VA Circuit Court reiterated this principal stating that nothing in the contract suggests that either party to the lawsuit had any intention to shift the risk of non-payment by the owner or non-performance of other subcontractors to the plaintiff (Precision).
Read the court decisionRead the full story...Reprinted courtesy of
The Law Office of Christopher G. HillMr. Hill may be contacted at
chrisghill@constructionlawva.com
Florida Passes Tort Reform Bill
April 10, 2023 —
William Doerler - The Subrogation StrategistOn Friday, March 24, 2023, Florida’s governor, Ron DeSantis, signed into law a tort reform bill, HB 837. The bill impacts, among other things, bad faith actions and attorney’s fee awards. Of particular importance to subrogation professionals are provisions impacting comparative fault, the statute of limitations and premises liability with respect to the criminal acts of third persons.
With respect to the statute of limitations, the bill amended Fla. Stat. § 95.11(3) and (4), to reduce the statute of limitations for negligence actions from four (4) years to two (2) years.
As for comparative fault, Fla. Stat. § 768.81 was amended to move Florida from a pure comparative fault jurisdiction for negligence actions to a modified comparative fault jurisdiction. Pursuant to § 768.81(6), as revised, in a negligence action subject to that section, “any party found to be greater than 50 percent at fault for his or her own harm may not recover any damages.” Section 768.81(6), however, does not apply to actions for damages for personal injury or wrongful death arising out of medical negligence.
Read the court decisionRead the full story...Reprinted courtesy of
William Doerler, White and Williams LLPMr. Doerler may be contacted at
doerlerw@whiteandwilliams.com
Mechanics Lien Release Bond – What Happens Now? What exactly is a Mechanics Lien and Why Might it Need to be Released?
January 04, 2021 —
William L. Porter - Porter Law GroupMechanics Lien Release Bond – What Happens Now? What exactly is a Mechanics Lien and Why Might it Need to be Released?
California law entitles unpaid contractors, subcontractors, and material suppliers to record a mechanics lien on property where they performed work or supplied materials. The mechanics lien attaches to the real property as a legal interest and secures the right to payment for the work performed and materials supplied. If payment is not forthcoming the mechanics lien allows the property where the work was performed and materials supplied to be sold under court order to satisfy the debt. It is a powerful remedy against owners and their agents who do not pay for work performed and materials supplied to improve the owner’s property.
A Mechanics Lien Release Bond Frees Property from a Mechanics Lien
Owners typically do not wish to have their property sold out from under them. Fortunately for owners, there is a method by which a mechanics lien can be substituted for another interest and sale of the property thereby avoided. This method is through the use of a mechanics lien release bond. California Civil Code §8424 allows a property owner or contractor effected by a mechanics lien to record a mechanics lien release bond equal to 125 percent of the lien amount with the County Recorder where the mechanics lien has been recorded. The effect of this is to substitute the mechanics lien release bond for the mechanics lien itself, thereby relieving the property from the possibility of that property being sold to satisfy the debt. Instead, any payment made will come from the release bond.
Read the court decisionRead the full story...Reprinted courtesy of
William L. Porter, Porter Law GroupMr. Porter may be contacted at
bporter@porterlaw.com
Eleven WSHB Lawyers Honored on List of 2016 Rising Stars
July 28, 2016 —
Beverley BevenFlorez-CDJ STAFFWood Smith Henning & Berman LLP (WSHB) announced that eleven of their attorneys were recognized on the list of 2016 Rising Stars. According to their press release, “The attorneys honored on the Rising Stars list are 40 years or younger and demonstrate the finest qualities of a good lawyer: first-rate legal skills, preparation, judgment, creativity, dedication and ethics. No more than 2.5 percent of the lawyers in each state are named to Rising Stars.”
The WSHB lawyers on the list practice out of Southern California, Northern California, the Pacific Northwest, Arizona, and Florida, and include Raymond Babaian, Emil Macasinag, Amy Pennington, Christopher Perez, Keith Smith, Kevin Gillispie, Alicia Kennon, Eugene Zinovyev, Timothyf Repass, Jodi Mullis, and Vincent Beilman.
“We are pleased to have 11 of our best selected for this year’s lists,” said Dan Berman, Firm Chairman and Founding Partner. “We value our selections to Rising Stars because the choices come from our peers. It is truly an honor and a validation of all of the great work we do at WSHB.”
Read the court decisionRead the full story...Reprinted courtesy of
How to Build a Water-Smart City
August 23, 2021 —
Chris Malloy - BloombergCities across time have stretched to secure water. The Romans built aqueducts, the Mayans constructed underground storage chambers, and Hohokam farmers dug more than 500 miles of canals in what is now the U.S. Southwest.
Today’s cities use portfolios of technologies to conserve supply — everything from 60-story dams and chemicals to centrifugal pumps and special toilets. And yet, the cities of tomorrow will have to do more.
A recent United Nations report on drought says climate change is increasing the frequency, severity and duration of droughts, which contribute to food insecurity, poverty and inequality. The report also asserts that “drought has been the single longest-term physical trigger of political change in 5,000 years of recorded human history.” It calls for urgent action and a transformation in governance to manage modern drought risk more effectively.
Read the court decisionRead the full story...Reprinted courtesy of
Chris Malloy, Bloomberg
