Seattle Washington Building Expert Directory

Five Keys to Driving Digital Transformation in Engineering and Construction

January 02, 2019 — Rob Phillpot - Construction Executive
Engineering and construction companies increasingly find themselves navigating an era of disruptive and transformative change driven by technology. And with the industry going strong and construction employment recently reaching a 10-year high, more companies recognize that it is time to embrace the efficiencies digital transformation brings, in large part to protect or enhance their competitive position. A report from the Global Industry Council notes that modern technology is moving to the strategic center of E&C business models as part of an evolutionary process. Reprinted courtesy of Rob Phillpot, Construction Executive, a publication of Associated Builders and Contractors. All rights reserved. Read the court decision
Read the full story...
Reprinted courtesy of

Bright-Line Changes: Prompt Payment Act Trends

September 16, 2024 — Stephanie L. Cooksey - Peckar & Abramson, P.C.
Untimely payment by the owner for contract work and additional work on construction projects can place an unfair financial burden on contractors and subcontractors. Most states have attempted to eliminate or mitigate this inequity in construction contracting through Prompt Payment Acts that govern payment deadlines and provide remedies for untimely payment. This article addresses the legislative trends aimed at minimizing the risk of non-payment, overdue payment, and withholding retainage in favor of downstream parties to a construction contract. Fortifying Contractor Protections with “Bright-Line” Language Over the last decade, states have been tightening prompt payment laws by replacing broad, general statutory language with bright-line rules. What is a bright-line rule? A specific or definite figure, a quantifiable marker—i.e., something owners, contractors, subcontractors, and suppliers should be aware of. Practically speaking, the more bright-line a prompt payment statute is, the greater the likelihood it will affect a construction project in your state. A standard form construction contract, if not reviewed carefully, can create conflicts or confusion if it gives a party more leeway on payment deadlines than the applicable Prompt Payment Act. For example, consider an owner-issued Construction Change Directive (“CCD”) that requires a contractor to commence additional work immediately while a formal change order is negotiated. Consequently, a CCD can push financial burdens downstream, whether inadvertently or not, and may conflict with statutory payment deadlines. Nevertheless, an owner can be justified in its utilization of a CCD to maintain the project schedule. How should the parties competing interests be resolved? Read the court decision
Read the full story...
Reprinted courtesy of Peckar & Abramson, P.C.

9th Circuit Closes the Door on “Open Shop” Contractor

September 04, 2018 — Garret Murai - California Construction Law Blog
At the height of the Great Depression nearly one-quarter of Americans were unemployed. In response, Congress enacted a series of laws including the Smoot-Hawley Tariffs Act, which raised tariffs on foreign goods in an effort to spur domestic investment and to increase the number of jobs. Sound familiar? Background The Davis-Bacon Act Among the new laws enacted by Congress was the Davis-Bacon Act which required contractors on federal works projects to pay their workers the wages prevailing in the area where a project was located, also known as “prevailing wages,” in an effort to stem the practice of employers bringing in lower-wage workers from outside the area. The same year that the Davis-Bacon Act was enacted, California enacted its own prevailing wage law modeled after the Davis-Bacon Act and applicable to state and local public works projects. Read the court decision
Read the full story...
Reprinted courtesy of Garret Murai, Wendel, Rosen, Black & Dean LLP
Mr. Murai may be contacted at gmurai@wendel.com

Surviving a Tornado – How to Navigate Insurance Claims in the Wake of the Recent Connecticut Storm

May 24, 2018 — Geoffrey Miller - Saxe Doernberger & Vita, P.C.
Five minutes after I parked my car, a tree fell on it. On Tuesday, May 15th I pulled into my driveway, in my small Connecticut neighborhood, under a grey sky. As soon as I walked in the house, the lights flickered. And then suddenly there was a loud “Crack!” and “Crash!” and the sound of breaking glass. I looked out the window and trees were bent 90 degrees, then snapping, and then flying up instead of falling down. As quickly as it came, it passed. When I stepped outside, my first thought was that my car has seen better days. Read the court decision
Read the full story...
Reprinted courtesy of Geoffrey Miller, Saxe Doernberger & Vita, P.C.
Mr. Miller may be contacted at gjm@sdvlaw.com

COVID-19 Response: Environmental Compliance Worries in the Time of Coronavirus

April 20, 2020 — Karen Bennett, Jane Luxton, William Walsh & Amanda Tharpe - Lewis Brisbois
Earlier this week, a rumor made the rounds that a forthcoming Presidential Executive Order would impose a nationwide mandate that all employees work remotely. While the rumor proved baseless, it raised questions about manufacturers’ abilities to comply with environmental permit obligations in the event of a COVID-19 precipitated operational shutdown due to federal or state mandates or workforce depletion resulting from widespread illness. Previous emergencies offer some insights on what to expect as companies and their counsel assess environmental business risk. In the wake of Hurricane Katrina, several bills were introduced in Congress that would have allowed the Environmental Protection Agency (EPA) to waive or modify requirements, issue emergency permits, or expedite permits as needed to respond to disaster and recovery needs. In the end, no new legislation was enacted, because existing emergency powers under environmental statutes proved sufficient to allow for waiver of regulatory requirements or exercise of enforcement discretion. Key provisions include the following:

The Clean Water Act’s (CWA) affirmative defense for “upset” conditions. This provision excuses non-compliance with technology-based permit effluent limitations due to factors outside the permittee’s control. Criteria for establishing the defense include: 1) the upset occurred and the permittee can identify the cause, 2) the permitted facility was at the time being properly operated, 3) the permittee submitted notice of the upset (24 hour notice), and 4) the permittee complied with any remedial measures required under 40 C.F.R. §122.41(d).

Reprinted courtesy of Lewis Brisbois Bisgaard & Smith attorneys Karen Bennett, Jane Luxton, William Walsh and Amanda Tharpe Ms. Bennett may be contacted at Karen.Bennett@lewisbrisbois.com Ms. Luxton may be contacted at Jane.Luxton@lewisbrisbois.com Mr. William may be contacted at William.Walsh@lewisbrisbois.com Ms. Amanda may be contacted at Amanda.Tharpe@lewisbrisbois.com Read the court decision
Read the full story...
Reprinted courtesy of

Get Smarter About Electric Construction Equipment

October 24, 2022 — CONEXPO-CON/AGG
MILWAUKEE – Sustainability in the construction industry is being advanced by the public and private sectors. Governments are adopting more clean-air regulations at local and regional levels and companies are adopting sustainability policies and asking partners to help them meet their targets. Consequently, many manufacturers have already developed – or are in the process of developing – electric-powered construction equipment to meet increasing emissions regulations, provide efficiency improvements, and lower operating costs. All electric, electric/hydraulic, and battery-operated versions rival their diesel and gas counterparts in performance, notes Joel Honeyman, Vice President of Global Innovation at Bobcat. THE CHANGING INDUSTRY “People say electric machines are not going to perform as well as a diesel machine,” Honeyman observes. “That is simply not true. In many cases they can outperform them.” “Many people are so used to what they have and are afraid of new technology. Some companies have been running diesel- and gas-powered equipment for 40, 50 years. Hydraulics have been on equipment for 80 years. Adjusting to an electric-powered machine is quite a paradigm shift.” About the Association of Equipment Manufacturers (AEM) AEM is the North America-based international trade group representing off-road equipment manufacturers and suppliers with more than 1,000 companies and more than 200 product lines in the agriculture and construction-related industry sectors worldwide. The equipment manufacturing industry in the United States supports 2.8 million jobs and contributes roughly $288 billion to the economy every year. About CONEXPO-CON/AGG Held every three years, CONEXPO-CON/AGG is the must-attend event for construction industry professionals. The show features the latest equipment, products, services and technologies for the construction industry, as well as industry-leading education. The next CONEXPO-CON/AGG will be held March 14-18, 2023 in Las Vegas, Nevada. For more information on CONEXPO-CON/AGG, visit https://www.conexpoconagg.com. Learn more about excavator tech here. Read the court decision
Read the full story...
Reprinted courtesy of

Critical Materials for the Energy Transition: Of “Rare Earths” and Even Rarer Minerals

September 12, 2022 — Robert A. James, Ashleigh Myers, Shellka Arora-Cox & Amanda G. Halter - Gravel2Gavel Construction & Real Estate Law Blog
As the world pursues ambitious net-zero carbon emission goals, demand is soaring for the critical materials required for the technologies leading the energy transition. Lithium may be the most well-known of these inputs due to its usage in batteries for vehicles and consumer electronics, but roughly 50 other minerals are central to energy transition technologies. During the coming years, producers, manufacturers and end-users will be increasingly exposed to the roles played by “rare earth” elements (roughly, atomic numbers 57 to 71), platinum group metals, and other materials. The reasons for this heightened interest are simple—even if the underlying environmental, political and technological forces at play are complex:

Lower-carbon technologies use different materials than carbon-intensive technologies. The mineral requirements of power and mobility systems driven by renewable, nuclear, hydrogen and fusion energy are profoundly different from those forming the backbone of fossil fuel systems. Minerals such as lithium, nickel, copper, cobalt, and rare earth elements are vital for electric vehicles (EVs), batteries, fuel cells, electricity grids, wind turbines, smart devices, and many other essential and proliferating civilian and military technologies. For example, an offshore wind plant needs 13 times more mineral resources than a gas power plant of a similar size.

Reprinted courtesy of Robert A. James, Pillsbury, Ashleigh Myers, Pillsbury, Shellka Arora-Cox, Pillsbury and Amanda G. Halter, Pillsbury Mr. James may be contacted at rob.james@pillsburylaw.com Ms. Myers may be contacted at ashleigh.myers@pillsburylaw.com Ms. Arora-Cox may be contacted at shellka.aroracox@pillsburylaw.com Ms. Halter may be contacted at amanda.halter@pillsburylaw.com Read the court decision
Read the full story...
Reprinted courtesy of

Domingo Tan Receives Prestigious Ollie Award: Excellence in Construction Defect Community

May 28, 2024 — Wood Smith Henning & Berman
(Anaheim, CA.) - Wood Smith Henning & Berman is thrilled to announce that Domingo Tan, a partner in the Los Angeles office, has been awarded the prestigious Jerrold S. Oliver Award of Excellence. Fondly known as the "Ollie", this esteemed accolade is presented annually to a standout professional in the construction defect community who has demonstrated exceptional contributions and unwavering dedication to the field. The exciting announcement of Tan's victory took place during the 30th Anniversary of the West Coast Casualty Construction Defect Seminar in Anaheim. Widely recognized as the nation's largest conference for professionals handling construction defect matters, the event drew a remarkable gathering of general counsel, risk managers, claim professionals, and attorneys who actively participated in the nomination and voting process. The Ollie award pays tribute to the late Judge Jerrold S. Oliver, a highly respected legal professional renowned for his groundbreaking work in alternate dispute resolution methods for construction defect disputes. It celebrates individuals who embody the values of loyalty, commitment, and trust within the industry. Read the court decision
Read the full story...
Reprinted courtesy of Wood Smith Henning & Berman

SEATTLE WASHINGTON BUILDING EXPERT DIRECTORY AND CAPABILITIES