FAIRFIELD CONNECTICUT BUILDING EXPERT
DIRECTORY AND CAPABILITIES

Kahana Feld LLP Senior Attorney Rachael Marvin and Partner Dominic Donato Obtain Complete Dismissal of Plaintiff’s Labor Law Claims on Summary Judgment

August 19, 2024 — Rachel Marvin - Kahana Feld
Kahana Feld attorneys Rachael Marvin and Dominic Donato secured summary judgment dismissal of plaintiff’s Labor Law §§ 240(1), 241(6), and 200 claims asserted against their client, a general contractor of a housing project in Orange County, New York. The case involved a construction accident in which plaintiff fell while traversing a ramp, which was placed across an eight-foot-deep excavation trench. Plaintiff was employed by a subcontractor and was part of a crew performing the framing work on the project. The accident occurred when he exited his work area by walking across a ramp that was placed across the excavated trench, when the ramp gave way and plaintiff fell into the excavation. Read the court decision
Read the full story...
Reprinted courtesy of Rachel Marvin, Kahana Feld
Ms. Marvin may be contacted at rmarvin@kahanafeld.com

---

Contract Terms Can Impact the Accrual Date For Florida’s Statute of Repose

October 19, 2017 — William L. Doerler - White and Williams LLP
When the validity of a construction defect claim depends on whether the claim is barred by the applicable state’s statute of repose, it is important to review the statute to identify when claims subject to the statute of repose accrue. In Busch v. Lennar Homes, LLC, 219 So.3d 93 (Fla. Ct. App. (5th Dist.) 2017), the Court of Appeals of Florida clarified the accrual date for the statute of repose in cases where the accrual date depends on a construction contract’s completion date. Pursuant to Busch, the date of full performance under the contract, not the building’s purchase closing date, is the date on which claims accrue. In Busch, Timothy Busch (Busch), pursuant to a Purchase and Sale Agreement, contracted to have Lennar Homes build him a house. Nearly ten years after closing on the home, Busch served Lennar Homes with a notice of construction defects, as required by Florida’s right-to-repair act. Shortly thereafter, but more than 10 years after the home’s closing date, Busch filed suit against Lennar Homes, alleging that there were multiple construction defects associated with the home. Lennar Homes, relying on Florida’s statute of repose, Fla. Stat. § 95.11(3)(c), filed a motion to dismiss Busch’s complaint. Read the court decision
Read the full story...
Reprinted courtesy of William L. Doerler, White and Williams LLP
Mr. Doerler may be contacted at doerlerw@whiteandwilliams.com

---

Montana Court Finds Duty to Defend over Construction Defect Allegation

February 14, 2013 — CDJ STAFF
The U.S. District Court for Montana recently ruled on a case with underlying construction defect issues. Brian Margolies discussed Lukes v. Mid-Continent on the blog run by his firm, Traub Lieverman Straus & Shrewsberry LLP. In the construction defect case, the homeowner “alleged that the siding warped and pulled away from the house, which allowed for water intrusion and resulting exterior and interior damage.” Further, there were claims that “the insured or its subcontractor failed to install proper flashing, which also allowed for water intrusion.” The insured was Bernie Rubio, who had a general liability policy from Mid-Continent. Mid-Continent disclaimed coverage, citing sections of the business risk exclusions. The court did not find the clauses ambiguous, but concluded that they didn’t apply to the facts of the case. While the court concluded that Mid-Continent had a duty to defend, they did not determine if there was a duty to indemnify. Read the court decision
Read the full story...
Reprinted courtesy of

---

A Special CDJ Thanksgiving Edition

November 21, 2017 — Beverley BevenFlorez-CDJ STAFF
Welcome to the Construction Defect Journal’s special Thanksgiving edition. The CDJ staff has compiled the most important and interesting stories so far from 2017. From Supreme Court decisions to state construction defect law shake ups, this week’s edition showcases significant construction defect industry changes. With a mug of hot spiced cider in hand, relax and reflect on what has happened in our industry so far in 2017. CDJ wishes to give thanks to its amazing contributors and readers. It’s due to your efforts and support that CDJ is able to present a weekly summary of what is happening in the construction defect industry. We hope you enjoy this special edition, and wish you and your family a fun and festive Thanksgiving holiday. Read the court decision
Read the full story...
Reprinted courtesy of

---

That’s What I have Insurance For, Right?

December 31, 2014 — Craig Martin – Construction Contractor Advisor
Ah, the age old question, What does my insurance really cover? A federal court in Georgia recently weighed in on this issue in Standard Contractors, Inc. v. National Trust Insurance Company, and ruled that a contractor’s commercial general liability insurer did not have to pay for damage caused by a subcontractor. Standard Contractors was hired to renovate the pool on an army base. Standard hired a subcontractor to for design and installation work. The subcontractor’s work was subpar in that the subcontractor omitted a number of parts, installed the wrong parts, and caused more than $400,000 in damage to the pool. Standard submitted a claim to its insurer seeking coverage for the loss under its commercial general liability policy. Read the court decision
Read the full story...
Reprinted courtesy of Craig Martin, Lamson, Dugan and Murray, LLP
Mr. Martin may be contacted at cmartin@ldmlaw.com

---

New Opportunities for “Small” Construction Contractors as SBA Adjusts Its Size Standards Again Due to Unprecedented Inflation

September 11, 2023 — Hanna Lee Blake - ConsensusDocs
Thanks to the SBA’s November 17, 2022 adjustments to the size standards and monetary thresholds, a number of construction contractors will be able to retain their “small” status, and more contractors may benefit from federal assistance, programs, and contracts earmarked for “small” concerns. In the SBA’s view, small businesses should not lose their “small” status due solely to price level increases rather than from increases in business activity. It is anticipated that federal agencies may choose to set aside more construction contracts for competition among small businesses given the greater number of businesses that may be deemed “small” as a result of the SBA’s recent rule. In light of this, small construction contractors should consider whether it is prudent to register or update their existing profiles in the System for Award Management (SAM) to participate in federal contracting. The SBA’s Statutory Mandate The Small Business Act of 1953 (P.L. 83-163, as amended) authorized the SBA and justified the agency’s existence on the grounds that small businesses are essential to the maintenance of the free enterprise system. The congressional intent was to assist small businesses as a means to deter monopoly and oligarchy formation within all industries and the market failures caused by the elimination or reduction of competition in the marketplace. Congress delegated to the SBA the responsibility to establish size standards to ensure that only small businesses were provided SBA assistance. Since that time, the SBA has analyzed various economic factors, such as each industry’s overall competitiveness and the competitiveness of firms within each industry, to set its size standards. Read the court decision
Read the full story...
Reprinted courtesy of Hanna Lee Blake, Watt Tieder
Ms. Blake may be contacted at hblake@watttieder.com

---

Navigating Construction Contracts in the Energy Sector – Insights from Sheppard Mullin’s Webinar Series

October 01, 2024 — Cesar Pereira - Sheppard Mullin
Construction contracts in the energy sector involve unique challenges and risks, particularly with respect to bonds and mechanic’s liens. Understanding how to navigate these challenges is key to protecting your projects from disputes with general contractors, subcontractors and suppliers. In our recent webinar, “Construction Contracts: Bond and Mechanic’s Lien Primer for Energy Projects,” I was joined by my Sheppard Mullin colleagues Chris Kolosov and Emily Anderson to discuss navigating common contract pitfalls and negotiation strategies to protect your interests. Here are our key takeaways.

1. Know Local Mechanic’s Lien Laws: Mechanic’s liens are statutory and vary significantly from state to state. It is critical to understand the local laws and regulations at play in your project’s jurisdiction.

Read the court decision
Read the full story...
Reprinted courtesy of Cesar Pereira, Sheppard Mullin
Mr. Pereira may be contacted at cpereira@sheppardmullin.com

---

Construction Contract Clauses Which Go Bump in the Night – Part 1

November 10, 2016 — Garret Murai – California Construction Law Blog
Scope, time and cost provisions may be the most important clauses in your construction contract but they’re not the only ones which can impact your bottom line. The first in a multi-part series, here are some other important construction contract clauses you may (or may not realize you should) be losing sleep over.

Provision: Incorporation and Flow-Down Provisions

• Typical Provision: “The term ‘Contract Documents’ shall include, without limitation, the Prime Contract, drawings, specifications and other agreements between Contractor and Owner, insofar as they relate in any way, directly or indirectly, to Subcontractor’s Work under this Agreement, and are hereby incorporated by reference. Subcontractor agrees to be bound to Contractor in the same manner and to the same extent as Contractor is bound to Owner under the Contract Documents. Where, in the Contract Documents, reference is made to Contractor, and the work and specifications therein pertain to Subcontractor’s trade, craft, or type of work, such work or specifications shall be interpreted to apply to Subcontractor rather than Contractor.”
• What it Means: An incorporation provision literally “incorporates” another document or documents into a contract by merely referring to them by title or description and it is not uncommon for a lower-tiered contractor to never see those documents. A flow-down provision requires a lower-tiered contractor to comply with all obligations which a higher-tiered contractor, typically a direct contractor, owes to a higher-tiered party, typically, the owner. The intent of the provision to ensure that a lower-tiered subcontractor has no greater rights against a direct contractor has against the owner.
• What You Can Do: Lower-tiered contractors should obtain a copy of all documents to be incorporated into their contract and review them to ensure that they understand the obligations and any limitations to their rights. Lower-tiered contractors should also seek to include language requiring that a higher-tiered contractor assume toward the lower-tiered contractor all obligations and limitations on their rights that the owner assumes toward or is subject to with respect of the general contractor.

Read the court decision
Read the full story...
Reprinted courtesy of Garret Murai, Wendel Rosen Black & Dean LLP
Mr. Murai may be contacted at gmurai@wendel.com

---