Seattle Washington Building Expert Directory

Trends and Issues which Can Affect Workers' Compensation Coverage for Construction Companies

December 26, 2022 — Saxe Doernberger & Vita, P.C.
Recent trends in workers’ compensation coverage suggest that the number of claims are likely to continue to increase, specifically for high-risk industries, like the construction industry. This article explores multiple trends and issues which are likely to impact workers’ compensation insurance for construction companies. Several of these trends and issues reflect demographic, labor, and technological shifts, which have important implications for contractors and construction companies. 1. Technological Innovation and Worker Safety New wearable technologies and other data-collecting products such as helmets which warn of employee fatigue and sensors which help with ergonomic corrections have emerged in the markets to support safety measures in the construction industry. Although devices such as these tools can help business owners to demonstrate the implementation of safety programs to their insurance carriers, they can also distract the workers who are wearing them or go through a product malfunction, which could lead to injuries in the workplace and could also result in higher workers’ compensation premiums. While these new technological devices are intended to support worker safety on construction sites, it is also important for business owners to evaluate the potential risks of new technologies on a project site. Read the court decision
Read the full story...
Reprinted courtesy of Saxe Doernberger & Vita, P.C.

Court Holds That Public Entity Can Unilaterally Replace Subcontractor Under California’s Subletting and Subcontracting Fair Practices Act

July 22, 2019 — Garret Murai - California Construction Law Blog
The Subletting and Subcontracting Fair Practices Act (Public Contract Code section 4100 et seq.), also known as the Listing Law, is intended to prevent direct contractors on public works projects from “bid shopping” and “bid peddling.” Bid Shopping: Bid shopping is when a direct contractor discloses a subcontractor’s bid to other subcontractors in an attempt to obtain a lower bid than the one in which it based its bid to the owner. Bid Peddling: Bid peddling is the other side of the equation. It is when a subcontractor whose bid was not selected, lowers its bid in an attempt to induce the direct contractor to substitute it for another subcontractor after the prime contractor’s bid has been awarded. Read the court decision
Read the full story...
Reprinted courtesy of Garret Murai, Wendel, Rosen, Black & Dean LLP
Mr. Murai may be contacted at gmurai@wendel.com

UK Construction Defect Suit Lost over One Word

October 16, 2013 — CDJ STAFF
In the UK, be careful what you tell your insurer; the Court of Appeal has upheld the legality of basis clauses. As Paul Lewis and Janetta Gibbs of Herbert Smith Freehills LLP explain, “a basis clause is a provision set out in the proposal form or in the insurance contract itself, to the effect that all or any of the answers to the questions in the proposal shall form the basis of the contract of insurance.” The catch, as they point out, is that “should any of those answers — whether material to the risk or not — prove to be untrue, the insurer may repudiate the policy and treat itself as never having been on risk.” There is a move in the UK to abolish the use of basis clauses in business insurance, but currently they are still legal. This came up in a construction defect case covering latent defects in a public housing project. The contract between the owner, Genesis Housing Association Limited, and the contractor, Time and Tide (Bedford) Ltd, required TT Bedford to indemnify Genesis if it became insolvent. In the contract with the insurer, representatives of Bedford and Genesis referred to the contractor as “TT Construction.” While the courts concluded that Bedford and Genesis were not guilty of misrepresentation or intent to defraud, they did note that neither party thought the firm’s name was “TT Construction.” Therefore, over the failure to name the builder correctly, the court found that the insurance contract was invalid. Read the court decision
Read the full story...
Reprinted courtesy of

US Court Disputes $1.8B AECOM Damage Award in ‘Remarkable Fraud’ Suit

April 26, 2021 — Mary B. Powers - Engineering News-Record
A federal appeals court has thrown out a $1.8-billion award granted by a lower court three years ago to an AECOM unit in a bizarre legal battle involving a Nevada company that claimed to have won multiple contracts using the name of Morrison Knudsen—the former well-known Boise-based construction contractor that was sold in 1996, and through acquisitions, became part of design-build giant AECOM in 2014. Reprinted courtesy of Mary B. Powers, Engineering News-Record ENR may be contacted at ENR.com@bnpmedia.com Read the full story... Read the court decision
Read the full story...
Reprinted courtesy of

ConsensusDOCS Updates its Forms

October 21, 2015 — Christopher G. Hill – Construction Law Musings
As reported recently in ENR Magazine, among other publications, the ConsensusDOCS folks have updated their contract forms. Why is this news? First of all, it’s only been around three and a half years since these documents were officially released and this release is about 18 months sooner than anticipated (the original revision cycle was to be 5 years). Why the revision? According to my friend and counsel to ConsensusDOCS, Brian Perlberg, one major rationale is that “the economics of the construction industry today looks nothing like it did [in 2007.” Among the changes are several terminology changes (“constructor” instead of “contractor” for instance), the addition of mandatory green building design as a basic service (these forms already have a Green Building Addendum) if included in the Owner’s plan and the ability to provide for prevailing party attorney fees (before both sides of a dispute bore their own fees). Read the court decision
Read the full story...
Reprinted courtesy of Christopher G. Hill, Law Office of Christopher G. Hill, PC
Mr. Hill may be contacted at chrisghill@constructionlawva.com

Tall Mass Timber Buildings Now Possible Under 2021 IBC Code Changes

February 03, 2020 — Kenneth Bland - Construction Executive
The International Code Council (ICC) has approved 17 changes to the 2021 editions of the International Building Code (IBC) and International Fire Code, allowing for mass timber buildings up to 18 stories. With the addition of three new mass timber construction types (Type IV-A, IV-B, and IV-C), this is the first time in the history of the modern building code that significantly new construction types have been added to the code. Building Materials The primary building material that makes tall mass timber (TMT) buildings possible is cross-laminated timber (CLT). CLT is manufactured from dimension lumber (nominal 2x lumber) laid side-by-side or mass plywood panels of a specified width. Laminations of lumber are typically laid perpendicular to each other to form panels of various thicknesses that are bonded together using heat resistant adhesives that cure in large hydraulic presses. CLT commonly consists of an odd number of laminations. These solid wood panels can be anywhere from 6 inches to 20 inches nominal thickness and 60 feet long. Typical CLT panels will be 6 inches to 14 inches nominal thickness. The panels are fabricated off site, transported onto the construction site and assembled in a manner that is efficient and remarkably fast. CLT panels can be used as floor, wall, or roof building elements supported by glued-laminated beams and columns. Reprinted courtesy of Kenneth Bland, Construction Executive, a publication of Associated Builders and Contractors. All rights reserved. Read the court decision
Read the full story...
Reprinted courtesy of

Construction Defects and Commercial General Liability in Illinois

October 25, 2013 — CDJ STAFF
Nathan B. Hinch writes on his blog about construction defect law in Illinois. Mr. Hinch notes that he has been providing continuing legal education presentations about commercial general liability insurance and coverage of defective construction. In Illinois, for coverage to exist, “there must be ‘an occurrence’ that results in ‘property damage.’” The Illinois courts have determined that “defective work is not an ‘accident,’ reasoning that the contractor intended to do the work, whether it turned out to be defective or not,” however the court “found that there was an ‘accident’ and therefore an ‘occurrence’ in a case where a contractor allegedly caused property damage by negligently backfilling around a residential basement.” And ‘property damage’ must be “damage to property other than the work.” Read the court decision
Read the full story...
Reprinted courtesy of

E-Commerce Logistics Test Limits of Tilt-Up Construction

January 28, 2019 — Jeff Rubenstone - Engineering News-Record
While “fulfillment centers” and other e-commerce logistic facilities drive a hot market for the manufacturing sector, traditional construction methods such as tilt-up concrete panels are being pushed to ever-greater heights. At a recent project in Tulsa, Okla., contractor Clayco oversaw installation of tilt-up composite panels that reached 81 ft in height, using an unusual brace and a lot of careful pre-planning. Read the court decision
Read the full story...
Reprinted courtesy of Jeff Rubenstone, ENR
Mr. Rubenstone may be contacted at rubenstonej@enr.com

SEATTLE WASHINGTON BUILDING EXPERT DIRECTORY AND CAPABILITIES