SEATTLE WASHINGTON BUILDING EXPERT
DIRECTORY AND CAPABILITIES

Protecting and Perfecting Your Mechanics Lien when the Property Owner Files Bankruptcy

June 19, 2023 — William L. Porter - Porter Law Group
Introduction/Overview of the Mechanics Lien Law The California mechanics lien is a powerful tool for contractors, subcontractors and materials suppliers to secure payment of unpaid construction debts. A contractor, subcontractor or materials supplier is allowed to record a mechanics lien on real property, based on the value added to the property by the claimant during the construction process. The recorded mechanics lien provides the claimant with legal right to force the sale of the improved real property and thereby obtain the funds necessary to pay the delinquent debt. Under the usual procedure, the first step is the recording of mechanics lien with County Recorder’s office in the County where the property is located. A lawsuit to foreclose on the lien must then be filed in the County Superior Court of that County, within ninty (90) days after the mechanics lien is recorded. The goal of the lawsuit is to obtain a judgment for foreclosure on the mechanics lien by way of a forced sale of the property. The net proceeds of the sale will be used to pay the unpaid construction debt secured by the recorded mechanics lien, assuming that sale proceeds exceed the amount of senior liens and encumbrances. Read the court decision
Read the full story...
Reprinted courtesy of William L. Porter, Porter Law Group
Mr. Porter may be contacted at bporter@porterlaw.com

---

Court Clarifies Sequence in California’s SB800

December 20, 2012 — CDJ STAFF
As California’s Right-To-Repair law, SB800, nears its ninth birthday, it has remained “largely untested in the legal system” as noted by Megan MacNee of Wood, Smith, Henning & Berman LLP on the site RealEstateRama. She writes that some homeowners have requested documents prior to filing a claim, which she describes as an attempt to “game the system,” and “analogous to requiring a party to litigation to comply with discovery before a complaint is filed.” The court determined that homeowners may not request documents from the builder until they have actually filed a claim. The court noted that SB800 lacks any clear indication that homeowners may request documents before filing a claim (and also does not indicate that a builder would have to provide documents in these circumstances). The court concluded that the section that sets up the prelitigation procedures occurs before they section on documents discovery. “Because the document request is part of the prelitigation procedure, and the prelitigation procedure does not begin until the homeowner has served notice of a claim, it follows that there can be no prelitigation obligation to produce documents under section 912, subdivision (a) unless the homeowner has commenced the prelitigation procedure by serving notice of a claim.” Read the court decision
Read the full story...
Reprinted courtesy of

---

Digitalizing Cross-Laminated Timber Construction

August 28, 2018 — Aarni Heiskanen - AEC Business
A Finnish experimentation project has made cross-laminated timber construction more productive and creative by using digital modeling. The office of &’ [Emmi Keskisarja & Janne Teräsvirta & Company Architects Ltd] looks rather like a prototype workshop. Intriguing scale models, a 3D printer, and a small CNC machine all give clues about the architects’ current project. They’re determined to make wood construction more collaborative and creative using digital technologies and cross-laminated timber (CLT). Plenty of Room for Improvement “I’m going to present our KIRA-digi project at WDBE 2018 in September. Incidentally, our wooden installation will be on display during Helsinki Design Week,” says Keskisarja. “We want to communicate with the public, not just within our professional circles, as architects typically do. The theme of the week is trust, something that’s missing in today’s construction.” Read the court decision
Read the full story...
Reprinted courtesy of Aarni Heiskanen, AEC Business
Mr. Heiskanen may be contacted at aec-business@aepartners.fi

---

A Good Examination of Fraud, Contract and Negligence Per Se

February 28, 2018 — Christopher G. Hill – Construction Law Musings
I have spoken on several occasions here at Construction Law Musings about the interplay (or lack thereof) between fraud and contract as it relates to construction in Virginia. The general rule is that fraud and contract claims don’t mix and a fraud claim in the face of a contractual one is likely to be dismissed. However, there are exceptions to this rule as there are to just about every legal rule (we construction lawyers would be out of a job without them). A good examination of the interplay between fraud and contract was set out by the Eastern District of Virginia federal court in Zuberi et al v. Hirezi et al. In that case the Zuberis purchased a home from the Hirezis and later filed suit alleging that the Hirezis concealed serious structural defects that made the house uninhabitable and unsellable. Among the many claims by the Zuberis were those fro fraud, fraudulent inducement, constructive fraud, negligence per se, violation of the Virginia Consumer Protection Act, and civil conspiracy. In short, they were out for blood. Read the court decision
Read the full story...
Reprinted courtesy of Christopher G. Hill, The Law Office of Christopher G. Hill
Mr. Hill may be contacted at chrisghill@constructionlawva.com

---

Insurance Law Alert: Incorporation of Defective Work Does Not Result in Covered Property Damage in California Construction Claims

June 18, 2014 — Valerie A. Moore and Chris Kendrick - Haight Brown & Bonesteel LLP
In Regional Steel Corp. v. Liberty Surplus Ins. (No. B245961, filed 5/16/14, ord. pub. 6/13/14), a California appeals court held that the insured's use of the wrong steel seismic reinforcement hooks in construction of a mixed-use building was not an occurrence, and did not result in covered property damage. Regional Steel was the structural steel subcontractor on a 14-story mixed-use project in North Hollywood, California. Regional supplied plans which were approved by the developer and its structural engineers for installation of steel reinforcements, including seismic reinforcement hooks, to be encased in concrete. During construction, City inspectors determined that the plans called for the wrong hooks, necessitating repairs to finished portions of the work and delays in further construction. This ultimately resulted in a lawsuit between the developer, Regional Steel, the concrete subcontractor, the structural engineer and a quality assurance inspector. The project was insured under a wrap policy issued to the developer, with Regional named as an additional insured. The court rejected an argument that the wrap endorsement fundamentally changed the insurance, and the issue boiled down to whether incorporation of the wrong hooks, the damage caused by tearing out concrete to replace the hooks, or the resulting loss of use, triggered coverage. Liberty asserted that no damage to property was alleged and the purely economic losses caused by the need to reopen the poured concrete to correct the tie hook problem did not constitute "property damage" within the meaning of the policy. Liberty further posited that the tie hook problem did not constitute an “occurrence” within the meaning of the policy because the alleged damage was not caused by an accident. Reprinted courtesy of Valerie A. Moore, Haight Brown & Bonesteel LLP and Chris Kendrick, Haight Brown & Bonesteel LLP Read the court decision
Read the full story...
Reprinted courtesy of

---

Contractors Struggle with Cash & Difficult Payment Terms, Could Benefit From Legal Advice, According to New Survey

December 30, 2019 — Christopher G. Hill - Construction Law Musings
Guest Post Friday is back with a post from my pal Scott Wolfe. Scott is the founder and CEO of Levelset, which is used by thousands of contractors to make payments fast and easy. Scott, previously a construction attorney himself, founded Levelset to even the $1 trillion construction playing field, and is on a mission to make payments less stressful for contractors and suppliers across the globe. Getting paid in construction is slow, hard, and stressful, according to a survey conducted by Levelset & TSheets by Quickbooks that polled over 500 construction professionals. Half of the contractors surveyed complained that they did not get paid on time, which caused serious cash flow issues that negatively impacted their customer relationships and frequently forced them to dip into personal savings and lines of credit to keep their business afloat. View the 2019 Construction Payment Report here. Unfortunately, since the construction industry’s slow payment problems are well-documented, this sad reality isn’t too surprising. The findings, though, do demonstrate a massive cash crunch for the 1.5 million+ contractors in the United States, and underscores the importance of having legal help and counsel from a construction lawyer before, during, and after jobs. Read the court decision
Read the full story...
Reprinted courtesy of The Law Office of Christopher G. Hill
Mr. Hill may be contacted at chrisghill@constructionlawva.com

---

Injured Construction Worker Settles for Five Hundred Thousand

October 28, 2011 — CDJ STAFF

An upstate New York man who was injured when an unsecured truss fell off the railings of a scissor lift has settled for $500,000. As the accident happened at the building site for a casino for the Seneca Nation, attorneys for the construction firm had argued that New York labor laws were inapplicable as the injury happened on Seneca Nation land. The state appeals court ruled that as none of the parties involved were Native Americans, it was not internal to the affairs of the Seneca Nation.

Read the full story...

Read the court decision
Read the full story...
Reprinted courtesy of

---

Full Extent of Damage From Turkey Quakes Takes Shape

February 20, 2023 — Jeff Rubenstone - Engineering News-Record
Nearly two weeks after a pair of severe earthquakes rocked central Turkey and northern Syria, the full extent of damage to buildings and other structures is beginning to emerge. With the magnitude 7.8 and 7.5 epicenters located hundreds of kilometers apart, the area affected is vast. Reprinted courtesy of Jeff Rubenstone, Engineering News-Record Mr. Rubenstone may be contacted at rubenstonej@enr.com Read the full story... Read the court decision
Read the full story...
Reprinted courtesy of

---