Seattle Washington Building Expert Directory

Utah Becomes First State to Enact the Uniform Commercial Real Estate Receivership Act

March 29, 2017 — David Leta - Snell & Wilmer Real Estate Litigation Blog
On March 25, Utah became the first state to enact the Uniform Commercial Real Estate Receivership Act (“UCRERA”) which was drafted by the National Conference of Commissioners on Uniform State Laws (the “Conference”) and adopted by the Conference at its annual meeting in July 2015. The Utah Uniform Commercial Real Estate Receivership Act, (the “Utah Act”) mirrors UCRERA and applies to all commercial real property receiverships that are filed in the Utah District Courts on and after May 9, 2017. The Utah Act provides both substantive and procedural guidance in an area of law that historically has been marked by inconsistency and uncertainty. This new law not only will provide judges, lenders and other receivership constituents with much needed instruction about their respective rights and responsibilities in commercial receivership proceedings, but it also is likely to reduce the cost and increase the predictability of these receiverships in Utah. Read the court decision
Read the full story...
Reprinted courtesy of David Leta, Snell & Wilmer
Mr. Leta may be contacted at dleta@swlaw.com

More Details Emerge in Fatal Charlotte, NC, Scaffold Collapse

January 17, 2023 — Derek Lacey & Jim Parsons - Engineering News-Record
Details have emerged in the Jan. 2 scaffold collapse at an under-construction apartment high-rise in Charlotte, N.C. that killed three workers and injured two. A work suspension continues during an investigation led by the North Carolina Dept. of Labor's Occupational Safety and Health Division. Reprinted courtesy of Derek Lacey, Engineering News-Record and Jim Parsons, Engineering News-Record Mr. Lacey may be contacted at laceyd@enr.com Read the full story... Read the court decision
Read the full story...
Reprinted courtesy of

The Prompt Payment Act Obligation is Not Triggered When the Owner Holds Less Retention from the General Contractor

October 27, 2016 — John P. Ahlers – Ahlers & Cressman PLLC
Most states have laws known as “prompt payment” statutes which govern the timing of payments on public works projects[i] from project owners to general contractors, and from general contractors to subcontractors.[ii] The purpose of these statutes is to ensure that contractors and subcontractors who may have less leverage than the project owners and prime contractors, respectively, are paid for their work on a timely basis. Prompt Payment Act cases are rare, and, since many of the prompt payment statutes are founded on the same principles, when we come across a Prompt Payment Act case, it is “blog worthy.” This dispute arose from the construction of the Exposition Light Rail Line Project connecting downtown Los Angeles with Culver City on which FCI/Fluor/Parsons (“FFP”) was the prime contractor, and Bloise Construction, Inc. (“Bloise”) was the excavation subcontractor to FFP. Under the prime contract, Expo,[iii] the owner, was permitted to withhold ten percent of the payments owed to FFP, and FFP, pursuant to its subcontract with Bloise, was entitled to also withhold ten percent of the payments to Bloise as retention. Read the court decision
Read the full story...
Reprinted courtesy of John P. Ahlers, Ahlers & Cressman, PLLC
Mr. Ahlers may be contacted at jahlers@ac-lawyers.com

Update: Where Did That Punch List Term Come From Anyway?

December 21, 2016 — Duane Craig – Construction Informer
I’ve often wondered just where the term “punch list” came from, and I’ve found a few sources that seem to make sense, while others not so much. Enter the Realm of Conjecture and Opinion One person claims it came from the telephone installer process of “punching down” terminals on a block. That seems a bit of a stretch though. A blog writer said it had to do with the term ‘punch’ since it means to “punch something up” as in fix it. Another blog writer thought it had something to do with a long forgotten practice. Apparently subcontractors used to each have their own hole punches that would punch a hole with a shape unique to them. They would use these punches to indicate they had corrected the deficiency that was their responsibility. Read the court decision
Read the full story...
Reprinted courtesy of Duane Craig, Construction Informer
Mr. Craig may be contacted at dtcraig@constructioninformer.com

4 Ways to Mitigate Construction Disputes

March 20, 2023 — Bill Shaughnessy - ConsensusDocs
Resolving construction disputes in litigation (court or arbitration) can be expensive and may drag on for years. Most disputes could have been avoided, or at least mitigated, had the parties (both owners and contractors) identified contract risks during negotiations and been more proactive in communicating the risks during execution of the work. This article highlights four practical risk management approaches that help all parties focus on their mutual interest in close coordination and clear communication at the beginning of the project as well as throughout performance:

Identifying and allocating risks;
Accurate scheduling;
Clear project documentation and communication; and
Real-time dispute resolution.

The intent of these techniques is not to shift legal obligations or risks. Rather, the intent is to keep project personnel and project management for all the participants focused on communicating and working together, including responsibly confronting real problems to avoid or mitigate their impact. Allocating risks, scheduling, project documentation and communication, and real-time dispute resolution are independently relevant on a bilateral basis between the owner, designer, and the various contractors. These approaches and their diligent execution by the parties during construction contribute far more to a successful project than anything lawyers and claims consultants can contribute in after-the-fact legal proceedings. Read the court decision
Read the full story...
Reprinted courtesy of Bill Shaughnessy, Jones Walker LLP (ConsensusDocs)
Mr. Shaughnessy may be contacted at bshaughnessy@joneswalker.com

Improperly Installed Flanges Are Impaired Property

February 16, 2016 — Tred R. Eyerly – Insurance Law Hawaii
Answering certified questions from the Fifth Circuit, the Texas Supreme Court found there was no coverage for flanges that leaked after installation. U. S. Metals, Inc. v. Liberty Mutual Group, Inc., 2015 Texas LEXIS 1081 (Dec. 4, 2015). U. S. Metals sold Exxon 350 custom-made, stainless steel, weld-neck flanges for use in refineries. Testing after installation showed the flanges leaked and did not meet industry standards. Exxon decided to replace the flanges to avoid risk of fire and explosion. For each flange, this involved stripping the temperature coating and insulation, cutting the flange out of the pipe, removing the gaskets, grinding the pipe surfaces smooth for re-welding, replacing the flange and gaskets, welding the new flange to the pipes, and replacing the temperature coating and insulation. The replacement process delayed operation of the diesel units for several weeks. Exxon sued U.S. Metal for over $6 million as the cost of replacing the flanges and $16 million as damages for lost use of the diesel units during the process. U.S. Metals settled with Exxon for $2.2 million and then sought indemnification from its liability insurer, Liberty Mutual. Read the court decision
Read the full story...
Reprinted courtesy of Tred R. Eyerly, Insurance Law Hawaii
Mr. Eyerly may be contacted at te@hawaiilawyer.com

Resurgent Housing Seen Cushioning U.S. From World Woes: Economy

January 28, 2015 — Steve Matthews – Bloomberg
(Bloomberg) -- Real estate developer Crescent Communities in Charlotte, North Carolina, expects to sell 1,000 new homes this year across the Southeast U.S. and Texas, double the number of two years ago. “Demand is the strongest since the recession” that ended in June 2009 and stemmed from the collapse in housing, said Chief Executive Officer Todd Mansfield. “The economy is getting better and the labor market is getting better.” Read the court decision
Read the full story...
Reprinted courtesy of Steve Matthews, Bloomberg
Mr. Matthews may be contacted at smatthews@bloomberg.net

Berkeley Researchers Look to Ancient Rome for Greener Concrete

June 28, 2013 — CDJ STAFF
While modern concrete often crumbles after fifty years, some concrete laid down during the Roman Empire is still strong, even after 2,000 years. Researchers at UC Berkeley have been puzzling over the secrets of Roman concrete, using samples from a breakwater near Naples. The breakwater was built about 37 BC, and the concrete is still strong. Unlike modern concrete, the Romans made theirs with a mixture of lime and volcanic ash. Paulo Monteiro, a professor of civil and environmental engineering at Berkeley, noted that one of the drawbacks of Roman cement was that it hardens more slowly than modern concrete. An advantage is that it is more environmentally friendly, and the researchers are trying to determine if volcanic ash cement would be a good substitute. Professor Montiero hopes that fly ash and volcanic ash cements “could replace 40 percent of the world’s demand for Portland cement.” Read the court decision
Read the full story...
Reprinted courtesy of

SEATTLE WASHINGTON BUILDING EXPERT DIRECTORY AND CAPABILITIES