Fairfield Connecticut Building Expert Directory

Steven Cvitanovic Recognized in JD Supra's 2017 Readers' Choice Awards

April 05, 2017 — Steven M. Cvitanovic - Haight Brown & Bonesteel LLP
JD Supra named Partner Steven Cvitanovic among the Top 10 Authors in the construction industry in its 2017 Readers’ Choice Awards, which recognizes the excellence and achievement of firms and authors who published their substantive work on JD Supra in 2016. JD Supra editors chose the 25 industries and topics covered in these awards for their timeliness as well as their proven, ongoing importance. In each category, one firm and ten authors were recognized for consistently achieving the highest readership and engagement for all of 2016. Read the court decision
Read the full story...
Reprinted courtesy of Steven M. Cvitanovic, Haight Brown & Bonesteel LLP
Mr. Cvitanovic may be contacted at scvitanovic@hbblaw.com

Is Privity of Contract with the Owner a Requirement of a Valid Mechanic’s Lien? Not for GC’s

July 05, 2021 — Christopher G. Hill - Construction Law Musings
As any reader of this construction law blog knows, mechanic’s liens make up much of the discussion here at Construction Law Musings. A recent case out of Fairfax County, Virginia examined the question of whether contractual privity between the general contractor and owner of the property at issue is necessary. As a reminder, in most situations, for a contract claim to be made, the claimant has to have a direct contract (privity) with the entity it sues. Further, for a subcontractor to have a valid mechanic’s lien it would have to have privity with the general contractor or with the Owner. The Fairfax case, The Barber of Seville, Inc. v. Bironco, Inc., examined the question of whether contractual privity is necessary between the general contractor and the Owner. In Bironco, the claimant, Bironco, performed certain improvements for a barbershop pursuant to a contract executed by the two owners of the Plaintiff. We wouldn’t have the case here at Musings if Bironco had been paid in full. Bironco then recorded a lien against the leasehold interest of The Barber of Seville, Inc., the entity holding the lease. The Plaintiff filed an action seeking to have the lien declared invalid because Brionco had privity of contract with the individuals that executed the contract, but not directly with the corporate entity. Read the court decision
Read the full story...
Reprinted courtesy of The Law Office of Christopher G. Hill
Mr. Hill may be contacted at chrisghill@constructionlawva.com

North Carolina Should Protect Undocumented Witnesses to Charlotte Scaffolding Deaths, Unions Say

April 03, 2023 — Engineering News-Record
Charlotte Observer More than two months after a scaffolding collapse in Charlotte killed three men, labor unions are urging state leaders to protect undocumented construction workers who witnessed the collapse so they can safely talk to investigators. Reprinted courtesy of Engineering News-Record ENR may be contacted at enr@enr.com Read the full story... Read the court decision
Read the full story...
Reprinted courtesy of

An Obligation to Provide Notice and an Opportunity to Cure May not End after Termination, and Why an Early Offer of Settlement Should Be Considered on Public Works Contracts

August 17, 2020 — Jeff Kaatz - Ahlers Cressman & Sleight
In 2015, the City of Puyallup (“City”) and Conway Construction Company (“Conway”) executed a public works contract for road improvements (“Project”). On March 9, 2016, approximately four months after work started on the Project, the City issued Conway a notice of suspension and breach of contract and identified nine defective and uncorrected work and safety concerns. Conway denied any wrongdoing, and on March 25, 2016, the City issued a notice of termination for default and withheld payments due to Conway. Conway subsequently filed suit in Pierce County Superior Court and alleged the City’s termination for default breached the contract and sought a determination that the City’s termination for default was improper and should be deemed a termination for convenience. Conway sought approximately $1.25 million in damages and recovery of its attorney fees and costs. Following a bench trial, the Trial Court found the City breached the contract and awarded Conway damages, attorney fees, and costs. The City appealed.[1] On appeal, after affirming the trial court’s determination that the City improperly terminated Conway, the Court of Appeals considered two other issues raised by the City. First, whether the City was entitled to a set-off for replacing defective work discovered after Conway was terminated. Second, whether Conway is entitled to attorney fees if it did not make the statutorily required offer of settlement per RCW 39.04.240. Read the court decision
Read the full story...
Reprinted courtesy of Jeff Kaatz, Ahlers Cressman & Sleight
Mr. Kaatz may be contacted at Jeff.Kaatz@acslawyers.com

Inability to Confirm Coverage Supports Setting Aside Insured’s Default Judgment on Grounds of Extrinsic Mistake

January 21, 2019 — Christopher Kendrick & Valerie A. Moore - Haight Brown & Bonesteel LLP
In Mechling v. Asbestos Defendants (No. A150132, filed 12/11/18), a California appeals court affirmed the trial court’s grant of an insurer’s motion to set aside default judgments entered against its defunct insured pursuant to the trial court’s inherent, equitable power to set aside defaults on the ground of extrinsic mistake, thereby allowing the insurer to intervene and defend its own interests in the case. In Mechling, Fireman’s Fund insured Associated Insulation of California, which was named as a defendant in asbestos litigation filed in 2009. Associated had ceased operating in 1974, but was somehow successfully served with the complaint and defaulted, leading to default judgments of several million dollars. Notice of the judgments was served on Associated but not Fireman’s Fund. Reprinted courtesy of Christopher Kendrick, Haight Brown & Bonesteel LLP and Valerie A. Moore, Haight Brown & Bonesteel LLP Mr. Kendrick may be contacted at ckendrick@hbblaw.com Ms. Moore may be contacted at vmoore@hbblaw.com Read the court decision
Read the full story...
Reprinted courtesy of

3D Printing Innovations Enhance Building Safety

October 07, 2019 — Mahmut Ekenel & Melissa Sanchez - Construction Executive
The mention of 3D printing alone is enough to get people excited, often conjuring images of a desktop console that can download and create three dimensional objects such as prototypes, or mechanical parts. And yet, in recent years the technology has given way to a slight impatience, as people begin to wonder how and when it will have a direct impact on both their lifestyles and their businesses. The construction industry has been quick to take advantage of these innovations, and the effects are tangible, especially regarding building safety. The 3D construction technology allows for several key advantages in terms of faster construction times, uncompromised quality of construction and lower costs—allowing for affordable dwellings to be quickly built for people in need. These advantages also lead to safety improvements during the building process. The ability to accelerate construction time without requiring an increase in labor results in a fewer construction-related workplace injuries and a reduction in material waste, making it an environmentally friendly construction method as well. ICC-Evaluation Service (ICC-ES), a subsidiary of the International Code Council (ICC) which develops model codes and standards (i.e. International Building Code, International Residential Code) and delivers a wide array of building safety services, has taken the lead on developing acceptance criteria to address building code compliance of 3D printed construction. Currently, 3D construction technology is not within the provisions of the International Building Code (IBC) or International Residential Code (IRC). The acceptance criteria introduces new compliance measures for interior and exterior 3D printed concrete walls (with and without structural steel reinforcement), load-bearing and non-load-bearing walls, and shear walls in one-story, single-unit, residential dwellings. The 3D walls are constructed by printing two outer layers of 3D concrete and then filling the core with 3D concrete to form a solid wall. Reprinted courtesy of Mahmut Ekenel & Melissa Sanchez, Construction Executive, a publication of Associated Builders and Contractors. All rights reserved. Mr. Ekenel may be contacted at mekenel@icc-es.org Ms. Sanchez may be contacted at msanchez@icc-es.org Read the court decision
Read the full story...
Reprinted courtesy of

AI and the Optimization of Construction Projects

February 19, 2024 — Rahul Shah - Construction Executive
Seeking answers on how to construct smarter and greener buildings or improve water efficiency in homes and offices, those who create our buildings and construction projects are entering a new era of learning as they turn their attention to the benefits of artificial intelligence. While human involvement will continue to be paramount, AI has the potential to assist in creating informed decisions, for example by suggesting sustainable, durable materials or cost-effective, but still safe, practices. The possible applications of AI for the construction industry could be transformative across design, procurement, construction, operation and decommissioning. In fact, research suggests designers and contractors are already applying AI and machine learning to manage the volumes of data involved in the design of buildings, the planning of construction projects and the day-to-day operations of sites. Reprinted courtesy of Rahul Shah, Construction Executive, a publication of Associated Builders and Contractors. All rights reserved. Read the court decision
Read the full story...
Reprinted courtesy of

Navigating the Hurdles of Florida Construction Defect Lawsuits

April 03, 2013 — CDJ STAFF
The Florida law firm of Williams Law Association reminds readers that under the law, homeowners “cannot immediately file a lawsuit against their contractor if they subsequently discover construction defects.” The contractor must first have a chance to fix the defect. Further, there is a waiting period between informing the contractor and actually filing the lawsuit. For individual homeowners, that wait is 60 days, but for associations of more than 20 parcels, it’s 120 days. Read the court decision
Read the full story...
Reprinted courtesy of

FAIRFIELD CONNECTICUT BUILDING EXPERT DIRECTORY AND CAPABILITIES