Fairfield Connecticut Building Expert Directory

Forethought Is Key to Overcoming Construction Calamities

February 10, 2020 — Mitch Cohen - Construction Executive
Without warning, an under-construction structure in the southern United States suffered a catastrophic collapse. The tragedy resulted in the death of several people. As a result, engineering and construction post-collapse forensics experts engaged in an 18-month investigation. Those involved in the design and build project included the general contractor hired by the owner, a prime engineer, a consulting peer-review engineer and a prime structural design firm supported by a sub-consulting structural engineer. Although significant cracking was noticed several weeks before the failure, no one sounded the alarm or deemed the cracking worthy of corrective action. In their findings, forensic experts found the collapse resulted from the combined failure of the general contractor, engineers and even the owner, who all failed to shut down the work once the cracking reached unacceptable levels and/or take the appropriate actions needed to secure the public safety and mitigate the risk. This was even after the general contractor requested that the engineer-of-record and design manager assess the structure’s extreme cracking. Consequently, the choice to not seriously investigate the crack or seek an independent peer review to design a rectification plan contributed directly to the tragedy. This is typically referred to within the industry as a “negligent professional design error.” Reprinted courtesy of Mitch Cohen, Construction Executive, a publication of Associated Builders and Contractors. All rights reserved. Read the court decision
Read the full story...
Reprinted courtesy of
Mr. Cohen may be contacted at mitch.cohen@rtspecialty.com

HP Unveils Cheaper, 3-D Printing System to Spur Sales

November 05, 2014 — Jack Clark - Bloomberg
Hewlett-Packard Co. (HPQ) unveiled a new 3-D-capable computer and speedier 3-D printer technology as it prepares to spin off its personal-computer and printer businesses into a stand-alone company. The company today introduced Sprout, an $1,899 computer that lets people scan and manipulate 2-D and 3-D objects. It will be available early next month online and in some U.S. stores. Hewlett-Packard also said new 3-D printer technology will make the process cheaper and faster than competitors. The Palo Alto, California-based company is betting that 3-D technology will help revitalize sales and spur growth in the printer industry. More than 2.3 million 3-D printers will ship in 2018, up from about 108000 this year, according to researcher Gartner Inc. Earlier this month, Hewlett-Packard said it would split into two companies by late 2015, with one focused on corporate hardware services and the other -- dubbed HP Inc. -- on PCs and printers. Read the court decision
Read the full story...
Reprinted courtesy of Jack Clark, Bloomberg
Mr. Clark may be contacted at jclark185@bloomberg.net

Denver Condo Development Increasing, with Caution

January 21, 2015 — Beverley BevenFlorez-CDJ STAFF
According to Aldo Svaldi of The Denver Post, condo development has increased in the Denver metro area, though builders stated they are carefully documenting each step of construction as well as vetting contractors and materials. "We are being ultra-careful about everything," Roy Kline, a managing director at Western Development Group, told the Denver Post. Western Development is behind the 250 Columbine development. Svaldi reported that Western Development Group has been “photographing or filming every step of construction.” Brian Levitt and Trevor Hines of NAVA Real Estate Development “have spent the past year crafting a detailed three-page, 18-point action plan to deal with any contingency they could think of arising from the state's constructions-defects law.” Levitt told Svaldi that he “estimates all the safeguards being put in place will add 5 percent to 10 percent to the costs of the units at NAVA Sloan Lake, whose final price points are being determined.” Read the court decision
Read the full story...
Reprinted courtesy of

Why Do Construction Companies Fail?

February 14, 2023 — The Hartford Staff - The Hartford Insights
If a construction company takes on a lot of work, it’s a good thing, right? Not exactly. In fact, overextension is one of the primary reasons why contractors fail. And it’s something that contractors should consider as a priority for their risk management plan. Of the 43,277 construction businesses that started in March 2011, only 37.6% of companies survived 10 years later.1 “The construction industry has a high rate of failure,” explains Tim Holicky, senior executive underwriter in The Hartford’s construction central bond team. “And more often than not, it’s because of too much work, rather than too little of it. The key to a contractor’s long-term survival is knowing when to say no.” Read the court decision
Read the full story...
Reprinted courtesy of The Hartford Staff, The Hartford Insights

Construction Spending Drops in March

May 10, 2013 — CDJ STAFF
Reuters reports that construction spending dropped by 1.7 percent in March, bringing it to the lowest level since August, more than wiping out February’s increase of 1.5 percent. Economists had predicted a mild gain of 0.7 percent. Spending fell due to a 4.1 percent drop in public construction projects, bringing it to its lowest in six and a half years. Read the court decision
Read the full story...
Reprinted courtesy of

What Should Be in Every Construction Agreement

November 04, 2019 — Patrick Barthet - Construction Executive
A detailed and coherent construction agreement in place on every job minimizes confusion, makes clear everyone’s respective responsibilities and reduces disputes. There are six things that should be addressed in every construction agreement. DEFINE THE SCOPE Define what the scope of work is that will be provided. Will it be only materials; will it be materials and labor; or will it be just labor? Be very clear and specific in how the scope of work is spelled out. Many contracts state that the contractor is responsible for all work that’s shown on the plans and specifications, as well as that which is reasonably inferable. While subjective—even if not actually on the plans or specifications, someone may believe that something should be part of the contractor’s work. This could expand what has to be done beyond what was understood or priced. LIST ALL THE EXCLUSIONS Do the parties each have the same understanding as to what is covered in the contract? How often are contractors faced with customers thinking something was included as part of the work? The contractor may have believed that task, or that material, or that specially fabricated item was excluded. But was it? Did the contractor articulate what was and was not in the scope and price? Specifically listing what is excluded can obviate this problem. Articulate what is not in the price or scope and reduce the chance of one party believing that something is to be done when it isn't. Reprinted courtesy of Patrick Barthet, Construction Executive, a publication of Associated Builders and Contractors. All rights reserved. Read the court decision
Read the full story...
Reprinted courtesy of
Mr. Barthet may be contacted at pbarthet@barthet.com

Wendel Rosen’s Construction Practice Group Receives First Tier Ranking

January 28, 2015 — Garret Murai – California Construction Law Blog
We try to limit our narcissism here at Wendel Rosen but every once in a while we toot our own horn. Lawyers are, after all, a rather sad, competitive, yet insecure bunch (i.e., we eat this stuff up). We’re proud to announce that Wendel Rosen’s Construction Practice Group has received a first tier ranking in U.S. News & World Reports’ Best Law Firms for 2015. This is the second year the Construction Practice Group has received a first tier ranking. Yay us! Read the court decision
Read the full story...
Reprinted courtesy of Garret Murai, Wendel Rosen Black & Dean LLP
Mr. Murai may be contacted at gmurai@wendel.com

Doctrine of Merger Not a Good Blend for Seller of Sonoma Winery Property

April 15, 2015 — Kristen Lee Price and Lawrence S. Zucker II – Haight Brown & Bonesteel LLP
In Ram’s Gate Winery, LLC v. Joseph G. Roche, et al. (No. A139189 & A141090, filed 4/9/15) (Ram’s Gate), the California Court of Appeal for the First Appellate District held the doctrine of merger did not extinguish a seller’s contractual duty to disclose potentially hazardous seismic conditions on a Sonoma winery property. In Ram’s Gate, the buyer of the property filed a lawsuit alleging the seller failed to disclose information relating to earthquake issues prior to the close of escrow. In the parties’ “Purchase and Sales Agreement” (Purchase Agreement) the seller agreed to disclose any information known to it regarding “known geological hazards . . . soil reports . . . geotechnical reports” and other facts “having effect on the value of the ownership or use of the property.” The seller, however, argued this disclosure warranty did not survive the escrow period because it did not expressly provide for survival while other provisions in the Purchase Agreement did. Reprinted courtesy of Kristen Lee Price, Haight Brown & Bonesteel LLP and Lawrence S. Zucker II, Haight Brown & Bonesteel LLP Ms. Price may be contacted at kprice@hbblaw.com Mr. Zucker may be contacted at lzucker@hbblaw.com Read the court decision
Read the full story...
Reprinted courtesy of

FAIRFIELD CONNECTICUT BUILDING EXPERT DIRECTORY AND CAPABILITIES