Cambridge Massachusetts Building Expert Directory

What is an Alternative Dispute Resolution?

August 26, 2019 — Bremer Whyte Brown & O'Meara LLP
Alternative Dispute Resolution (“ADR”) is a term that refers to a number of processes that can be used to resolve a conflict, dispute, or claim. ADR processes are alternatives to having a court decide the dispute in trial. ADR processes can be used to resolve any type of dispute including but not limited those related to families, neighborhoods, employment, businesses, housing, personal injury, consumers, and the environment. ADR is usually less formal, less expensive, and less time-consuming than a trial. Most Common Types of Alternative Dispute Resolutions Mediation In mediation, an impartial person called a “mediator” helps the parties try to reach a mutually acceptable resolution of the dispute. The mediator does not decide the dispute but helps the parties communicate so they can try to settle the dispute themselves. Mediation leaves control of the outcome with the parties. Read the court decision
Read the full story...
Reprinted courtesy of Bremer Whyte Brown & O'Meara LLP

Trump Sues Casinos to Get Conditions Fixed or Name Off

August 06, 2014 — David Voreacos – Bloomberg
Donald Trump sued two Atlantic City casinos that he no longer operates to force their owner either to improve “appalling” conditions or remove his name in a market where gamblers are fleeing and bankruptcies are rising. Trump Plaza Hotel & Casino and Trump Taj Mahal fail to meet industry standards for cleanliness, hotel services and food and beverages, according to a complaint filed yesterday in state court in Atlantic City, New Jersey. Trump wants a judge to compel Trump Entertainment Resorts Inc., which he once controlled, to correct the shortcomings or jettison his name. The Trump Entertainment Resorts website includes his photograph above this quote: ``The Trump casinos in Atlantic City are among the finest and most luxurious resorts you'll find anywhere in the world. I personally invite you to experience everything that we have to offer.'' Trump Plaza is set to close Sept. 16, putting 1,000 people out of work. Read the court decision
Read the full story...
Reprinted courtesy of David Voreacos, Bloomberg
Mr. Voreacos may be contacted at dvoreacos@bloomberg.net

LAX Runway Lawsuit a Year Too Late?

January 17, 2014 — Beverley BevenFlorez-CDJ STAFF
The City of Los Angeles filed a lawsuit against Tutor-Saliba Corp. and O&G Industries Inc., which had created a joint venture to rebuild Runway 25L at Los Angeles International Airport (LAX), according to Brian Sumers writing for the Daily Breeze. However, lawyers for the construction companies are alleging that the lawsuit was filed a year too late: “…the complaint’s first four causes of action against Joint Venture are indisputably barred under California Law,” lawyers from Castle & Associates claimed. This news came soon after a plane blew a tire on the same runway involved in the lawsuit, as reported by the Los Angeles Times. The blown out tire may not be related to the alleged construction defects: “The runway is usable,” Nancy Castles, spokeswoman for Los Angeles World airports told the Los Angeles Times. Castles explained that “the lawsuit is about ‘deterioration’ and that at some point the runway will need to be rebuilt, but that time is not now.” Read the full story at the Daily Breeze... Read the full story at the Los Angeles Times... Read the court decision
Read the full story...
Reprinted courtesy of

The Hidden Price of Outdated Damage Prevention Laws: Part I

November 21, 2018 — Brigham A. McCown - Construction Executive
Excavators know that dialing 811 triggers a process that requires all utilities operating in the service area to find and mark the location of their underground facilities so that they are not damaged during the excavation process. In addition, marking the location of the utilities is intended to keep the public safe, for instance by preventing an excavator from striking a gas line. But excavators also know that in most states, the laws and regulations that govern these procedures are weak and that enforcement is even weaker. It’s an unfortunate fact that excavators and the public – typically the least culpable parties – suffer the consequences of weak damage prevention laws and lack of strong enforcement regimes. Reprinted courtesy of Brigham A. McCown, a publication of Associated Builders and Contractors. All rights reserved. Read the court decision
Read the full story...
Reprinted courtesy of

Utah Becomes First State to Enact the Uniform Commercial Real Estate Receivership Act

March 29, 2017 — David Leta - Snell & Wilmer Real Estate Litigation Blog
On March 25, Utah became the first state to enact the Uniform Commercial Real Estate Receivership Act (“UCRERA”) which was drafted by the National Conference of Commissioners on Uniform State Laws (the “Conference”) and adopted by the Conference at its annual meeting in July 2015. The Utah Uniform Commercial Real Estate Receivership Act, (the “Utah Act”) mirrors UCRERA and applies to all commercial real property receiverships that are filed in the Utah District Courts on and after May 9, 2017. The Utah Act provides both substantive and procedural guidance in an area of law that historically has been marked by inconsistency and uncertainty. This new law not only will provide judges, lenders and other receivership constituents with much needed instruction about their respective rights and responsibilities in commercial receivership proceedings, but it also is likely to reduce the cost and increase the predictability of these receiverships in Utah. Read the court decision
Read the full story...
Reprinted courtesy of David Leta, Snell & Wilmer
Mr. Leta may be contacted at dleta@swlaw.com

Four Key Steps for a Successful Construction Audit Process

May 03, 2021 — Ronald L. Williams, Fox Rothschild LLP - ConsensusDocs
The implications of the audit provisions contained in construction agreements between owners and contractors owners extend far beyond post-completion bean counting, and can affect multiple aspects of a project, from project administration to relationships with key subcontractors. It is critically important that contractors give audits the attention they deserve by taking the following four steps. First, invest the time to negotiate the audit provisions that ultimately appear in contracts with the owner. Second, ensure that the project team and the owner’s project auditors engage in timely communication during construction. Third, make certain that post-completion audit administration is prompt and complete. And finally, carefully draft adequate “flow-down” provisions with subcontractors and vendors so that they understand and comply with their contractual obligations, as well as the expectations of the contractor and owner. All four aspects are critical, and if not addressed effectively can undermine the profitability of the contract, and contractors’ business relationships with both upstream and downstream parties. Negotiations At the outset of contract negotiations, a contractor must completely understand the owner’s audit process expectations. An owner’s understanding of the audit process and its potential pitfalls depends on their own experience, as well as the knowledge of their personnel, including internal audit members and external auditors. Negotiations, which like the audit itself need not be adversarial, can be educational for both the owner and any representatives involved. Read the court decision
Read the full story...
Reprinted courtesy of Ronald L. Williams, Fox Rothschild LLP
Mr. Williams may be contacted at rwilliams@foxrothschild.com

Don’t Waive Too Much In Your Mechanic’s Lien Waiver

December 22, 2019 — Christopher G. Hill - Construction Law Musings
In the past few years, the Virginia General Assembly has, with certain caveats, precluded pre-furnishing waiver of mechanic’s lien rights. While this essentially outlawed the types of mechanic’s lien waiver clauses that pervaded construction contracts in Virginia, the key to the previous sentence is “pre-furnishing.” What the General Assembly left intact were the usual waivers of mechanic’s lien rights typically required to be provided to Owners and others in the payment chain in exchange for payment. These lien waivers come in a few “flavors” from conditional to unconditional, partial to full. Their terms usually include an acknowledgement of receipt of payment (we’ll get to this later), and a statement that the one seeking payment knows of no possible claims by lower tier subcontractors and then waives all mechanic’s lien rights against the property for work performed and included in the request for payment. Often over my years as a Virginia construction attorney, I have noticed that these waivers are often signed without comment or review. They are just part of the process and more often than not are not even an issue for most projects. Of course, if they are an issue they can be a big one, and their terms can come back to bite a claimant that has not properly vetted them. The first potential issue is waiving lien rights while acknowledging receipt prior to actual receipt of the check or wire. Many of the waiver forms that are out there list a payment amount, or possibly simply state that the waiver is in exchange for some small payment, and then state “receipt of which is acknolwedged” or something similar. The issue here is that receipt may not have happened yet because these lien waivers are submitted as part of the payment package in order to get paid in the first place. In short, should you sign the waiver prior to payment, you may have acknowledged a non-event and in the event of non-payment have a written document stating that you waived your claim to a lien for that money. What a court would do with this, I am unsure, but why risk it? My advice, be sure your waiver is contingent on actual clearance of payment as well as receipt. Read the court decision
Read the full story...
Reprinted courtesy of The Law Office of Christopher G. Hill
Mr. Hill may be contacted at chrisghill@constructionlawva.com

Turner Construction Selected for Anaheim Convention Center Expansion Project

May 21, 2014 — Beverley BevenFlorez-CDJ STAFF
The Anaheim, California city council selected Turner Construction Company “to manage a $180 million expansion of the Anaheim Convention Center, a venue that hosted 238 tradeshows, conventions, meetings and consumer events in 2013,” according to Construction Digital. “Turner’s Southern California office calls Anaheim home, and we are pleased to be working on such a great project in our own backyard,” Kevin Dow, Vice President and General Manager of Turner’s Southern California office told Construction Digital. Read the court decision
Read the full story...
Reprinted courtesy of

CAMBRIDGE MASSACHUSETTS BUILDING EXPERT DIRECTORY AND CAPABILITIES