Seattle Washington Building Expert Directory

New York Considers Amendments to Construction Industry Wage Laws that Would Impose Significant Burden Upon Contractors

August 04, 2021 — Richard W. Brown & Michael D. Angotti - Saxe Doernberger & Vita, P.C.
A bill that would amend the the wage and hour requirements of the New York Labor Law was recently passed by the New York State Legislature and is expected to be signed by Governor Cuomo. Bill Number S2766C (the “Bill”) is intended to protect construction workers against wage theft. However, it places a heavy burden on contractors to police the payroll practices of its downstream subcontractors and exposes them to potentially significant liability for the wage and hour violations of their subcontractors. The proposed Bill would make a contractor or upstream subcontractor jointly and severally liable for any wages owed to employees of their subcontractors. The Bill allows for a private right of action for such subcontractor’s employee (or such employee’s representative) to bring a civil or administrative action seeking payment of unpaid wages owed pursuant to Section 198 of the New York Labor Law. In such an action against a subcontractor for unpaid wages, the contractor or upstream subcontractor is not only jointly and severally liable for any unpaid wages, but also for the prevailing claimant’s reasonable attorney fees, prejudgment interest, and, absent a good faith defense, liquidated damages equal to the amount of the wages owed. Reprinted courtesy of Richard W. Brown, Saxe Doernberger & Vita, P.C. and Michael D. Angotti, Saxe Doernberger & Vita, P.C. Mr. Brown may be contacted at RBrown@sdvlaw.com Mr. Angotti may be contacted at MAngotti@sdvlaw.com Read the court decision
Read the full story...
Reprinted courtesy of

2017 Colorado Construction Defect Recap: Colorado Legislature and Judiciary Make Favorable Advances for Development Community

January 24, 2018 — Kaitlin Marsh-Blake – Gordon & Rees Construction Law Blog
Last March, the Colorado General Assembly introduced House Bill 17-1279 concerning the requirement that a unit owners’ association obtain approval through a vote of unit owners before filing a construction defect action. The bill, passed in May, requires a home owners’ association to first notify all unit owners and the developer or builder of a potential construction defect action, call a meeting where both the HOA and developer or builder have an opportunity to present arguments and potentially remedy the defect, and obtain a majority vote of approval from the unit owners to pursue a lawsuit before bringing a construction defect action against a developer or builder. The bill amends C.R.S. § 38-33.3-303.5, which previously only required substantial compliance with the above-mentioned actions. Moreover, the previous version of C.R.S. § 38-33.3-303.5 did not require the HOA to perform these actions prior to a suit being filed. HB 17-1279 also removed the provision of C.R.S. § 38-33.3-303.5 that made it only applicable to buildings of five or more units. Read the court decision
Read the full story...
Reprinted courtesy of Kaitlin Marsh-Blake, Gordon & Rees
Ms. Marsh-Blake may be contacted at kmarsh-blake@grsm.com

The Risk of A Fixed Price Contract Is The Market

August 03, 2022 — David Adelstein - Florida Construction Legal Updates
When performing work on a fixed price or unit, there is risk that is being assumed on your end. One risk is the market. You are ultimately banking on the fact that the market is not going to make your fixed prices unprofitable. That’s not an unforeseeable occurrence because the market shifts and that shift can have a negative ripple effect. In a recent case out of the Federal Circuit, U.S. Aeroteam, Inc. v. U.S., 2022 WL 243176 (Fed.Cir. 2022), this market risk played a role in a fixed price contract. Here, a contractor was hired by the federal government to produce ground support trailers. A key component of these trailers was a running gear. The contractor relied on a vendor for these running gears. Due to financial difficulties, the vendor had to raise its unit price for the running gears. Based on the increased price, the contractor elected to manufacture the running gears itself. The contractor asked the government if this was ok and the government approved the request. Once the contractor started manufacturing these running gears, it had an “awe” moment – the manufacturing costs were higher than anticipated. The contractor submitted a request for equitable adjustment which the government denied. The Contractor than sued the government raising three arguments to support its entitlement to additional costs: (1) constructive change; (2) cardinal change; and (3) commercial impracticability. The contractor lost on all arguments. It probably should have lost on all arguments. Read the court decision
Read the full story...
Reprinted courtesy of David Adelstein, Kirwin Norris, P.A.
Mr. Adelstein may be contacted at dma@kirwinnorris.com

Despite Construction Gains, Cement Maker Sees Loss

May 10, 2013 — CDJ STAFF
Vulcan Materials, the Birmingham, Alabama-based business that describes itself as the nation’s largest producer of construction aggregates and aggregate-based construction materials, has reported that its losses have increased to $54.8 million in the first quarter of 2013. This was on revenues of $538 million, an increase from the past. The first quarter also saw the company shipping 248,000 tons of material, an increase of fourteen percent over the first quarter of 2012. Losses were attributed to bad weather, lower production volumes, and an increase in costs. Global Cement quotes Don James, the chairman and CEO of Vulcan, “growth in residential construction activity and its traditional follow-on impact to private non-residential construction underpins our expectations for volume and earnings improvement in 2013.” Read the court decision
Read the full story...
Reprinted courtesy of

Reminder: Just Being Incorporated Isn’t Enough

June 29, 2020 — Christopher G. Hill - Construction Law Musings
I have discussed why contractors need to incorporate previously here at Construction Law Musings. Among the many reasons to incorporate are possible tax benefits and the protection of personal assets (like your house and your dog) from judgement and collection actions. This latter reason is key in the construction world in which Murphy can look like an optimist and projects have so many moving parts that something is likely to go wrong. The reason incorporation works as at least a partial shield is that the company and the owners are separate “people” or entities from a legal perspective and a contract with one “person” cannot be enforced against another. This same logic applies in the context of corporate versus individual actions, i. e. the actions of one person cannot be legally attributed to another person. By extension the assets of an individual cannot be collected to satisfy a purely corporate debt or judgment. Read the court decision
Read the full story...
Reprinted courtesy of The Law Office of Christopher G. Hill
Mr. Hill may be contacted at chrisghill@constructionlawva.com

How to Cool Down Parks in Hot Cities

July 08, 2024 — Todd Woody - Bloomberg
The drive to be outside, even in hot weather, is hard to overcome. People without air conditioning would be more likely to seek relief at their local park, according to Elie Bou-Zeid, a professor of civil and environmental engineering at Princeton, than at a government building where they can feel like climate refugees. “It’ll certainly be more pleasant to be in a park than in some indoor stadium where nobody wants to go,” he says. The scientists are combining inexpensive technologies, some novel, some already in use, that they plan to test first in New Jersey for deployment in hot spots like Phoenix. Kirigami The art of cutting and folding paper, kirigami is inspiring researchers to design structures that control wind in specific ways. A kirigami structure made from fabric and placed over misters could regulate wind speed to maximize cooling. Or it could form the roof of a pavilion, steering air into the structure. Misters They spray small water droplets that quickly evaporate, cooling the air. But the effectiveness of misters, which have long been used in cities such as Las Vegas and Phoenix, depends on wind speed. If there’s too little wind, the droplets won’t all evaporate; too much wind and the cooling effects dissipate. Read the court decision
Read the full story...
Reprinted courtesy of Todd Woody, Bloomberg

BIM Legal Liabilities: Not That Different

February 10, 2020 — Christopher G. Hill - Construction Law Musings
For this week’s Guest Post Friday here at Musings, we welcome Scott P. Fitzsimmons. Scott is an attorney with the construction law firm Watt, Tieder, Hoffar & Fitzgerald, where he represents contractors, subcontractors, owners, and engineers. He is also a LEED AP and an instructor for AGC of D.C., where he teaches BIM Contract Negotiation and Risk Allocation as part of AGC’s Certificate of Management, Building Information Modeling program. When a new technology is introduced to the construction industry, contractors inevitably ask themselves one question “Great, how can this new gadget get me into trouble?” Building Information Modeling (BIM) is exactly the kind of technology that raises this fear. But, BIM has been around for a few years now, and the construction industry has done a good job of curtailing the fear of unanticipated legal liability. Nevertheless, contractors should be aware of the pitfalls BIM introduces and should know how to limit their risk arising from this new “gadget.” Often described as “CAD on Steroids,” BIM is truly much more than a simple design program. Along with early clash detection, BIM provides time and cost integration; calculates energy efficiency; and assists building maintenance long after project completion. Unlike CAD, BIM also modifies the collaborative nature of a construction project. Thus, subcontractors no longer review a design, submit shop drawings, and go to work. Rather, subcontractors are brought into the design process early in the project and often are asked to contribute to the design long before construction begins. Asking a contractor or subcontractor to provide design services appears to shift the roles of an architect and a contractor. So, the questions abound: Is a contractor now responsible for design? Can the contractor be held responsible for defective design? Do not fret. To date, there has been only one advertised case addressing BIM liability. The reason is simple. For almost a hundred years, the United States Supreme Court has held that contractors are not responsible for defective design on a traditional design-bid-build project. Using BIM, therefore, should not modify a contractor’s responsibility. But, to ensure that your obligations do not extend beyond construction, all BIM requirements should be in writing and made part of your contract. Read the court decision
Read the full story...
Reprinted courtesy of The Law Office of Christopher G. Hill
Mr. Hill may be contacted at chrisghill@constructionlawva.com

Tenants Who Negligently Cause Fires in Florida Beware: You May Be Liable to the Landlord’s Insurer

May 13, 2019 — Rahul Gogineni - The Subrogation Strategist
In Zurich Am. Ins. Co. v. Puccini, LLC, 2019 Fla. App. LEXIS 1487, 44 Fla. L. Weekly D 383, Florida’s Third District Court of Appeals considered whether a landlord’s carrier, Zurich American Insurance Company (Zurich), was precluded from pursuing a subrogation claim against the landlord’s tenant, Puccini, LLC (Puccini), for fire-related damages. After the fire, Zurich paid its insured, Lincoln-Drexel Waserstein, Ltd. (Lincoln), over $2.1 million. Zurich then proceeded with an action against Puccini. Puccini filed for summary judgment arguing that it was an additional insured under the Zurich policy. The trial court agreed with Puccini and dismissed the action. Zurich then appealed the case to Florida’s Third District Court of Appeals. Finding that the lease contemplated both liability on the part of the tenant and indemnification in favor of the landlord, the court held that the tenant was not an implied co-insured under Zurich’s policy. Thus, the court allowed Zurich’s subrogation action. The Sutton Doctrine Extension of the Anti-Subrogation Rule In the United States, most states have adopted an anti-subrogation rule either by statute or through common law. Under an anti-subrogation rule, an insurer may not pursue its insured for monies paid to the insured. While some states limit their anti-subrogation rule to apply only to the named insured, other states have expanded the rule to include parties listed as additional insureds, and even, in some instances, implied insureds (those parties not specifically listed, but still considered an insured under the applicable policy). Read the court decision
Read the full story...
Reprinted courtesy of Rahul Gogineni, White and Williams LLP
Mr. Gogineni may be contacted at goginenir@whiteandwilliams.com

SEATTLE WASHINGTON BUILDING EXPERT DIRECTORY AND CAPABILITIES