CAMBRIDGE MASSACHUSETTS BUILDING EXPERT
DIRECTORY AND CAPABILITIES

The Texas Storm – Guidance for Contractors

March 08, 2021 — Curtis W. Martin & Paulo Flores - Peckar & Abramson, P.C.
The Texas snow and ice storm of February 2021 will long be remembered. It has affected everyone across the State, and its impacts continue to be felt a week later. This Alert provides the construction industry with guidance and recommendations for navigating commercial risk resulting from the storm. The potential impacts to your projects may be wide reaching. Consequences on a project site can include damage to the site, delays to work from the storm or from government orders, or simply the lack of help from trades who are dealing with serious personal catastrophes. Offsite impacts can cover a much broader scope of issues, including supply production issues or transportation interruptions. So, what can contractors facing such impacts do to avoid losses, mitigate the impacts, and prepare for what’s to come? Reprinted courtesy of Curtis W. Martin, Peckar & Abramson, P.C. and Paulo Flores, Peckar & Abramson, P.C. Mr. Martin may be contacted at cmartin@pecklaw.com Mr. Flores may be contacted at PFlores@Pecklaw.com Read the court decision
Read the full story...
Reprinted courtesy of

---

Will Millennial’s Desire for Efficient Spaces Kill the McMansion?

September 10, 2014 — Beverley BevenFlorez-CDJ STAFF
Builder Magazine reported that millennials are currently “inhabiting high-tech, yet cozy student housing and apartments” without having “outsized space expectations,” however, that may change over the next ten years as “their preference for the walkable convenience that often accompanies smaller living spaces will collide head on with their parents’ (and grandparents’) insatiable addiction for square footage.” Regardless, builders may decide to change based upon a younger generation that accepts “efficient spaces.” According to Builder Magazine, Nick Lenhert, executive director at architectural firm KTGY, argued that the young “don’t really want what mom and dad have until they get married. Then all of a sudden things start to revert. They start getting realistic about what they need for the children and what they need for themselves. [Right now,] Gen Y is used to living in small spaces or with roommates because that’s all they can afford.” However, John Thatch, principal and director of design at the architectural and planning firm Dahlin Group, believes that even as millennials get older and conceivably need greater square footage, there is still a possibility that their tendency toward efficient spaces will continue: “I’m hoping this is the generation [that pulls in house size] because our generation went gigantic. It’s a chance for architects to get back to design smaller, more thoughtful spaces that are flexible.” Read the court decision
Read the full story...
Reprinted courtesy of

---

Direct Contractors In California Should Take Steps Now To Reduce Exposure For Unpaid Wages By Subcontractors

February 07, 2018 — Nora Stilestein, Candace Matson , and Mercedes Cook - Construction & Infrastructure Law Blog
As of January 1, 2018, direct contractors in California who make or take a contract “for the erection, construction, alteration, or repair of a building, structure, or other private work” are jointly and severally liable with their subcontractors for any unpaid wages, fringe benefits and other benefit payments or contributions owed to wage claimants. Governor Brown approved AB 1701 on October 14, 2017. The new law puts the onus on direct contractors to not only monitor their own payroll practices, but to ensure that their subcontractors and lower tier subcontractors are engaging in proper payroll practices. Reprinted courtesy of Sheppard Mullin attorneys Nora Stilestein, Candace Matson and Mercedes Cook Ms. Stilestein may be contacted at nstilestein@sheppardmullin.com Ms. Matson may be contacted at cmatson@sheppardmullin.com Ms. Cook may be contacted at mcook@sheppardmullin.com Read the court decision
Read the full story...
Reprinted courtesy of

---

ASCE Statement on EPA Lead Pipe and Paint Action Plan

December 27, 2021 — Tom Smith, Executive Director - American Society of Civil Engineers (ASCE)
WASHINGTON, DC. – The American Society of Civil Engineers applauds the Lead Pipe and Paint Action Plan released yesterday by the Environmental Protection Agency to help communities across the country remove lead pipes out of their drinking water systems. Access to clean and safe drinking water is critical to public health and economic prosperity, and ASCE's 2021 Report Card for America's Infrastructure. gave a grade of C- for the drinking water category. It is estimated that as many as 10 million American households still have lead water pipes in use, which can put at risk the health and safety of families, particularly children. For utilities, moving forward with completing an inventory of lead service lines as part of the Lead and Copper Rule is a critical step, so we can get a better national picture of the scope of the problem. This plan will allocate nearly $3 billion from the recently passed Infrastructure Investment and Jobs Act (IIJA) to states for lead service line replacements in FY 2022 and will prioritize communities with the highest lead levels. While additional investment will be needed, it is a significant down-payment on a national shared priority of clean drinking water for all Americans. It will allow utilities of all sizes to accelerate their rate of lead pipe replacement and offer technical assistance to those communities just embarking on these types of projects. For more information about the American Society of Civil Engineers, visit www.asce.org or www.infrastructurereportcard.org and follow us on Twitter, @ASCETweets and @ASCEGovRel. Read the court decision
Read the full story...
Reprinted courtesy of

---

What Are The Most Commonly Claimed Issues In Construction Defect Litigation?

April 22, 2019 — David M. McLain - Colorado Construction Litigation Blog
As a lawyer that has spent his career defending against construction defect claims, one of the most common questions I get when counseling clients regarding risk management is: “What are the most commonly claimed issues in construction defect litigation?” Until very recently, my answer to this question has been based on my own experience and knowledge on the subject, and only vaguely reliant on empirical data. Recently, two engineers, Elizabeth Brogan and William McConnell, along with Caroline Clevenger, an associate professor at the University of Colorado, Denver, wrote a paper entitled “Emerging Patterns in Construction Defect Litigation: A Survey of Construction Cases.” The authors analyzed 41 multifamily construction defect cases litigated in 2015, 2016 and 2017, mostly in the Denver metro area. The authors classified the 55 most prevalent alleged defects into the following categories: structural issues; civil issues; building envelope issues; roof issues; deck, balcony and porch issues; fire protection issues; and miscellaneous issues. The authors then identified the 10 most commonly claimed construction defects, which occurred in over half of all of the cases analyzed. Read the court decision
Read the full story...
Reprinted courtesy of David M. McLain, Higgins, Hopkins, McLain & Roswell, LLC
Mr. McLain may be contacted at mclain@hhmrlaw.com

---

Affordable Housing, Military Contracts and Mars: 3D Printing Construction Potential Builds

September 05, 2022 — Adam J. Weaver & Lindsey Mitchell - Gravel2Gavel Construction & Real Estate Law Blog
The 3D printing construction market is likely on the cusp of a boom. This unique construction method boasts many advantages in comparison to traditional forms of construction. Projects can be completed more quickly and at a fraction of the cost, given fewer laborers are required and the materials used are much cheaper. Though market growth stalled during the COVID-19 pandemic, industry leaders expect 3D printing construction to experience exponential growth in the coming years. While 3D printing technology has risen in popularity and prominence in the past couple of decades, it is only recently that 3D printing companies have begun making strides in the construction industry. Critical to the construction process is the software that is used to create and model the planned structure. A software program turns a building’s blueprint into code that then dictates the movement of a 3D printer on the construction site. After a concrete-like mix is loaded into the printer, the printer begins to build the walls by laying one cylindrical layer of concrete at a time, in accordance with the blueprint. There is no one-size-fits-all approach in 3D printing construction: some companies print the core structure as well as the roof and floor of the structure, while others print only the core and shell and install those portions separately using traditional methods and materials. Reprinted courtesy of Adam J. Weaver, Pillsbury and Lindsey Mitchell, Pillsbury Mr. Weaver may be contacted at adam.weaver@pillsburylaw.com Read the court decision
Read the full story...
Reprinted courtesy of

---

South Dakota Supreme Court Holds That Faulty Workmanship Constitutes an “Occurrence”

September 14, 2017 — Samantha Martino - Saxe Doernberger & Vita, P.C.
The South Dakota Supreme Court recently determined that damage resulting from a subcontractor’s failure to test soil compaction before constructing a home constituted an “accident” and was therefore an “occurrence” under a commercial general liability (CGL) policy. In Owners Ins. Co. v. Tibke Construction, Inc., the homeowners hired Tibke Construction, Inc. to build a new house, and Tibke Construction hired subcontractor Jerry’s Excavating to perform excavation work. The homeowners contended that Jerry’s Excavating failed to do soil compaction testing before commencing construction, which resulted in the home being built on highly expansive soils, leading to damage including excessive settlement, cracking and structural unsoundness. Read the court decision
Read the full story...
Reprinted courtesy of Samantha Martino, Saxe Doernberger & Vita, P.C.
Ms. Martino may be contacted at smm@sdvlaw.com

---

Contract Provisions That Help Manage Risk on Long-Term Projects

June 29, 2020 — Jason Lambert - Construction Executive
Few things can dampen the thrill and promise of a newly closed construction deal than the realization that it could quickly become a losing proposition for the contractor depending on economic and other conditions. In an era of instant information, constantly adjusting markets and political extremes, projects that start under one set of assumptions or conditions can occur or conclude under much different ones. While no one has a crystal ball, there are contractual provisions that can provide clear guidance in the face of many “what ifs” that can arise in construction. One of the chief concerns a contractor should have in a project lasting more than a few months is what impact price increases will have on the profitability of the job. On a true cost-plus project, this may be of little concern, but on any project with a limitation on costs or a guaranteed maximum price, contractors should insist on a procedure to revisit the limitation or price if certain conditions change. This can be as simple as allowing the contractor to receive an upward adjustment in the price if costs increase by more than a certain percentage. It can be as complicated as requiring multiple new bids and disclosures to the property owner, architect or project manager and allowing approval of new suppliers or subcontractors to limit cost increases to the cheapest increase. The protection—and certainty—to the contractor though, comes from having a process in the contract to address cost increases, whether it is simple or complex. Reprinted courtesy of Jason Lambert, Construction Executive, a publication of Associated Builders and Contractors. All rights reserved. Read the court decision
Read the full story...
Reprinted courtesy of
Mr. Lambert may be contacted at Jason.lambert@dinsmore.com

---