Benford’s Law: A Seldom Used Weapon in Forensic Accounting
March 05, 2015 —
Roger Hughes – California Construction Law BlogWhat is Digit Analysis and Why it Should be of Interest to Construction Attorneys?
Benford’s Law was named after Frank Benford, a General Electric physicist. Mr. Benford was the first to discover that “leading digits” do not follow a uniform distribution pattern as suggested by intuition. If you are like me, the response to such a statement is “huh”? But stick with me because this is important stuff to anyone who suspects a claim presentation may have been rigged, a bit here or a bit there, or maybe all over. It turns out that calculations purportedly based upon naturally, randomly occurring numbers may have been contrived. By “randomly occurring” we mean numbers that occur naturally without human interference as opposed to a contrived selection. Said another way, it is now accepted as a mathematical truth that the pattern of numbers randomly generated can be distinguished from numbers influenced by human intervention. Yikes, glad you told me that before I prepared my taxes.
Read the court decisionRead the full story...Reprinted courtesy of
Roger Hughes, Wendel Rosen Black & Dean LLPMr. Hughes may be contacted at
rhughes@wendel.com
2014 WCC Panel: Working Smarter with Technology
May 13, 2014 —
Beverley BevenFlorez-CDJ STAFFDon MacGregor, Project Manager and General Contractor with Bert L. Howe & Associates, will be joining Brian Kahn, Esq. of Chapman, Glucksman, Dean, Roeb & Barger, Paul R. Kiesel, Esq. of Kiesel Law, Hon. Peter Lichtmen (ret), Hon. Nancy Wieben Stock (ret), and Peter S. Curry of Curry Stenger Engineering as a panelist in the break-out session Working Smarter With Technology at the 2014 West Coast Casualty Construction Defect Seminar being held May 15th and 16th at the Disneyland Hotel in Anaheim, California.
With a strong focus on the topic of this year’s seminar, Back to Business . . . Working Smarter, Not Harder, the panel will discuss ways that technology can assist our industry in working more efficiently, saving money and providing a better product. Conversely, the panel will also acknowledge the limitations of technology and areas where the use of advanced technology may not be appropriate.
The information provided will be of benefit to the construction defect litigator but equally valuable to other types of complex litigation. Accordingly, this panel will appeal to those whose scope of work goes beyond the bounds of construction defect. A brief outline of topics that will be addressed by each panelist include remote virtual appearance and deposition attendances, document management software, how to create, manage and edit documents using remote technology, technological tools that allow for easier communications, transfer of information and flexibility, expert technology, and technology in mediation and trial.
The panel discussion will go beyond past seminar discussions in that they will discuss and demonstrate tools that are just coming into use now as well as new tools which are being released prior to the seminar.
Read the court decisionRead the full story...Reprinted courtesy of
Bill Taylor Co-Authors Chapter in Pennsylvania Construction Law Book
October 26, 2017 —
William Taylor - White and Williams LLPBill Taylor, Co-Chair of the Construction and Surety Group, co-authored a chapter in the recently released third edition of Pennsylvania Construction Law: Getting Started, Getting Covered, Getting Paid. The book, published by the Pennsylvania Bar Institute, follows the development of a construction project through contracts, insurance and bonding, performance, claims, warranties and completion, and for troubled projects, termination. Bill's chapter focuses on surety bonds on construction projects in Pennsylvania.
Read the court decisionRead the full story...Reprinted courtesy of
William Taylor, White and Williams LLPMr. Taylor may be contacted at
taylorw@whiteandwilliams.com
BIM Legal Liabilities: Not That Different
February 10, 2020 —
Christopher G. Hill - Construction Law MusingsFor this week’s Guest Post Friday here at Musings, we welcome Scott P. Fitzsimmons. Scott is an attorney with the construction law firm Watt, Tieder, Hoffar & Fitzgerald, where he represents contractors, subcontractors, owners, and engineers. He is also a LEED AP and an instructor for AGC of D.C., where he teaches BIM Contract Negotiation and Risk Allocation as part of AGC’s Certificate of Management, Building Information Modeling program.
When a new technology is introduced to the construction industry, contractors inevitably ask themselves one question “Great, how can this new gadget get me into trouble?” Building Information Modeling (BIM) is exactly the kind of technology that raises this fear. But, BIM has been around for a few years now, and the construction industry has done a good job of curtailing the fear of unanticipated legal liability.
Nevertheless, contractors should be aware of the pitfalls BIM introduces and should know how to limit their risk arising from this new “gadget.”
Often described as “CAD on Steroids,” BIM is truly much more than a simple design program. Along with early clash detection, BIM provides time and cost integration; calculates energy efficiency; and assists building maintenance long after project completion. Unlike CAD, BIM also modifies the collaborative nature of a construction project. Thus, subcontractors no longer review a design, submit shop drawings, and go to work. Rather, subcontractors are brought into the design process early in the project and often are asked to contribute to the design long before construction begins.
Asking a contractor or subcontractor to provide design services appears to shift the roles of an architect and a contractor. So, the questions abound: Is a contractor now responsible for design? Can the contractor be held responsible for defective design? Do not fret. To date, there has been only one advertised case addressing BIM liability. The reason is simple. For almost a hundred years, the United States Supreme Court has held that contractors are not responsible for defective design on a traditional design-bid-build project. Using BIM, therefore, should not modify a contractor’s responsibility. But, to ensure that your obligations do not extend beyond construction, all BIM requirements should be in writing and made part of your contract.
Read the court decisionRead the full story...Reprinted courtesy of
The Law Office of Christopher G. HillMr. Hill may be contacted at
chrisghill@constructionlawva.com
No Bad Faith In Filing Interpleader
August 19, 2015 —
Tred R. Eyerly – Insurance Law HawaiiThe Eighth Circuit determined that filing an interpleader action in the face of multiple claims against the policy holder did not constitute bad faith. Purscell v. Tico Ins. Co., 2015 U.S. App. LEXIS 10438 (8th Cir. June 22, 2015).
Ben Purscell's vehicle collided with another vehicle, in which Tim and Amy Carr were riding. The Carrs were injured, and Purscell's passenger, Amy Priesendorf, was killed. Before the accident, Priesendorf had stretched her leg over and put her foot on the accelerator, on top of Purscell's foot. As the other car approached, Purscell swerved to avoid an accident, but the two vehicles collided.
Purscell had a policy with Infinity Assurance Insurance Company. The policy limited liability to $25,000 per person and $50,000 per accident for bodily injury. Infinity put the full $50,000 per accident limits on reserve, with $25,000 designated to Priesendorf's fatality and $25,000 designated to the Carrs.
Read the court decisionRead the full story...Reprinted courtesy of
Tred R. Eyerly, Insurance Law HawaiiMr. Eyerly may be contacted at
te@hawaiilawyer.com
Colorado Court of Appeals Enforces Limitations of Liability In Pre-Homeowner Protection Act Contracts
February 14, 2013 —
Heidi Gassman — Higgins, Hopkins, McLain & Roswell, LLCKeirns Construction Co. (“Keirns”) hired Landmark Engineering, Ltd. (“Landmark”) to provide a geotechnical investigation and foundation designs for two duplexes Keirns built in Larimer County. Keirns and Landmark signed one contract in 2001 for the geotechnical work and two separate contracts in 2005 for the foundation design of the two duplexes. Each contract contained an identical “risk allocation clause,” which had language specifically limiting Landmark’s liability to Keirns. The risk allocation clause also had language specifically prohibiting claims against individuals and only allowing claims against a corporation.
After the two duplexes were built, foundation problems developed, and Keirns filed suit against Landmark for breach of contract and negligence. Keirns also filed suit against two individual employees of Landmark, Wayne Thompson and Larry Miller, for negligence. Messrs. Thompson and Miller performed the geotechnical and design services pursuant to the contracts.
Landmark and Messrs. Thompson and Miller filed a motion seeking to enforce the risk of allocation clauses in the contracts, thereby limiting Landmark’s liability. Messrs. Thompson and Miller also filed a summary judgment motion seeking their dismissal from the case based on the prohibition in the risk allocation clause against asserting claims against individuals.
Read the court decisionRead the full story...Reprinted courtesy of
Heidi GassmanMs. Gassman can be contacted at
gassman@hhmrlaw.com
School District Client Advisory: Civility is not an Option, It is a Duty
May 13, 2014 —
Gregory J. Rolen - Haight Brown & Bonesteel LLP“I could not but wonder at the Queen’s unprecedented civility, until I realized with a flush of shame that it was my own improved behavior that motivated hers. So it is that we in life determine our own treatment.” - Catherine Gilbert Murdock
I. We Must Actively Encourage Board Civility
Over 20 years of experience representing public entities has taught me there is nothing more important than civility. On April 11, 2014, I was a featured presenter on, "How to Keep School Boards Out Of Trouble!" My initial focus was to educate the board members about open meeting laws, public records, and conflict provisions. Instead, I began by addressing board "civility." The discussion became animated. The audience was transfixed, appalled, and even amused at my examples of how uncivilized board behavior led to lawsuits, bad press, wasted resources and low morale. One attendee asked me to define civility. I meekly responded, "The Golden Rule?" "Disagreeing without being disagreeable?" My answers were inadequate. I then had a humbling epiphany. As an education law specialist, and the General Counsel of one of the largest, most diverse school districts in California, I needed to do more to foster civility among the board members I served. I had underestimated the destructive effects of incivility on my district, my colleagues, and my community.
On some level I realized that the coarsening of the discourse was taking its toll. However, I was so involved in performing my duties; I forgot to do my job. I should have taken a step back and implemented training, policies, initiatives and protocols to promote civility. I realize that it is unfortunate that we have to establish standards for adult interactions, especially for people who have promised to place service over self. As I learned, you can never fully anticipate human interactions or the complexities of the human condition. That is why I believe proactive measures to promote civility are so critical. This is not being nice for the sake of being nice. But instead, it is an absolutely vital component of effective governance. Therefore, in this essay I will discuss civility and its importance to school boards and districts. I will address the deleterious effects of board incivility. More importantly, I hope to present no-nonsense methods to cultivate civility. It is my sincere desire that others will learn from my experiences, and this time I want to do better!
Read the court decisionRead the full story...Reprinted courtesy of
Gregory J. Rolen, Haight Brown & Bonesteel LLPMr. Rolen may be contacted at
grolen@hbblaw.com
Arizona Contractor Designs Water-Repellant Cabinets
September 09, 2011 —
CDJ STAFFDubbing his product “Baltic Duck,” a Mesa, Arizona building contractor is offering household cabinets made with specially treated water-repellent plywood instead of the usual particle board. Pete Celano calls his product Baltic Duck because the plywood is made in the Baltic region of Eastern Europe. To further protect the cabinets from moisture, a silicone-based sealant is applied to the corners and edges.
Celano’s cabinets use standard decorative fronts. The design of the cabinets allows spilled liquids to drain away without encountering the decorative wood.
Read the full story…
Read the court decisionRead the full story...Reprinted courtesy of
