No Coverage for Additional Insured After Completion of Operations
March 26, 2014 —
Tred R. Eyerly – Insurance Law HawaiiThe Fifth Circuit held there was no duty to defend an additional insured for alleged negligence after completion of the project. Woodward v. Acceptance Indemn. Ins. Co., 2014 U.S. App. LEXIS 2569 (5th Cir. Feb. 11, 2014).
Pass Marianne, L.L.C. contracted for the construction of condominiums. The general contractor was Woodward. DCM Corporation, L.L.C. was a subcontractor for the concrete work. DCM worked on the project from January to October 2006. The entire project was completed in August 2007. Pass Marianne sold the condominiums to Lemon Drop Properties in October 2007.
Lemon Drop sued Pass Marianne and Woodward a year after purchasing the condominium. Pass Marianne filed a cross-claim against Woodward alleging faulty construction and damage arising out of the construction. The claims were arbitrated. A significant issue in the arbitration was the fault of the concrete subcontractor, DCM.
Read the court decisionRead the full story...Reprinted courtesy of
Tred R. Eyerly, Insurance Law HawaiiMr. Eyerly may be contacted at
te@hawaiilawyer.com
Where Mechanic’s Liens and Contracts Collide
July 02, 2018 —
Christopher G. Hill - Construction Law MusingsToday at Construction Law Musings, we’re back to a discussion of mechanic’s liens.
This past week, the Loudoun County Circuit Court here in Virginia had an opportunity to discuss the interaction between mechanic’s liens, contracts and the law of fixtures. In TWP Enters. v Dressel, the Court considered a provision of a contract between the TWP Enterprises, a supplier of materials to the construction project, and the builder for the defendant. The provision between the supplier and builder essentially stated that until such time as TWP’s materials were paid for in full, TWP kept title to them (check out the case link above for the full text of the provision).
Needless to say, the builder did not pay and TWP filed a mechanic’s lien then sued to enforce that lien. The owners demurred to the complaint and asked the Court to dismiss the claim on several grounds, among them that the contractual provision described above precluded the enforcement of the lien because TWP retained title to the materials despite the fact that they had been incorporated into the structure of the building and were therefore part of the realty.
Read the court decisionRead the full story...Reprinted courtesy of
Christopher G. Hill, The Law Office of Christopher G. HillMr. Hill may be contacted at
chrisghill@constructionlawva.com
The Miller Act Explained
May 21, 2014 —
Beverley BevenFlorez-CDJ STAFFGarret Murai, on his California Construction Law Blog, goes over the nuances of the Federal Miller Act. Murai explained, “Named after John E. Miller, former Arkansas Congressman, later U.S. Senator and still later federal judge, the Miller Act was enacted in 1935 in the middle of the Great Depression, to help ensure that subcontractors and material suppliers working on federal projects get paid, by requiring contractors who contract directly with the federal government on federal construction projects furnish payment and performance bonds.”
Murai answered questions such as what is required under the act, who is protected, how a general contractor could protect itself from a Miller Act claim, as well as others.
Read the court decisionRead the full story...Reprinted courtesy of
2022 Construction Outlook: Continuing Growth But at Slower Pace
January 24, 2022 —
Garret Murai - California Construction Law BlogIn the midst of a pandemic that has lasted far longer than I think many of us thought it would, it’s been a study in contrasts:
- There has been over 305 million COVID-19 cases and 5.5 million deaths worldwide since the start of the pandemic.
- The U.S. stock market gained a whopping 26.9% in 2021.
- The annual rate of inflation in the U.S. hit 6.8% in November 2021 the highest it has been in nearly 40 years.
- The U.S. unemployment rate stood at 4.2% at the end of 2021, down from 14.7% in April 2020, the second highest unemployment rate since the Great Depression.
- The Doomsday Clock struck 100 seconds before midnight in 2021 as scientists warn that global leaders are doing too little too late to combat climate change that has seen global temperatures rise roughly 2 degrees Fahrenheit since the pre-industrial era.
- 2021 saw the launch of the first all-civilian spaceflight by Elon Musk’s Space X which was just one of 16 private spaceflights by tech billionaires Richard Branson’s Virgin Galactic and Jeff Bezos’ Blue Origin.
For the construction industry, when we started out in 2021, economists were estimating that construction starts would be up just 4% in 2021 after taking a 14% free-fall in 2020. As it turned out, construction starts increased 12% in 2021. That’s why economic forecasts should be viewed less like a marksmanship competition and more like horseshoes and hand grenades. Close is about the best you can realistically hope for.
Read the court decisionRead the full story...Reprinted courtesy of
Garret Murai, Nomos LLPMr. Murai may be contacted at
gmurai@nomosllp.com
When Do You Call Your Lawyer?
October 08, 2014 —
Craig Martin – Construction Contractor AdvisorThe National Association of Home Builders recently conducted a survey asking its members about the legal issues they faced in the last 12 months and whether they consulted their attorney to deal with the problem. Below are some highlights of the survey.
Legal Issue % of Homebuilders % Contacted Counsel
Warranty/call back claims 34% 51%
Contract disputes 22% 84%
Defective Install/Workmanship 20% 83%
OSHA Issues 13% 33%
CGL Coverage Questions 11% 73%
Construction Liens 10% 57%
Read the court decisionRead the full story...Reprinted courtesy of
Craig Martin, Lamson Dugan and Murray, LLPMr. Martin may be contacted at
cmartin@ldmlaw.com
Why Is California Rebuilding in Fire Country? Because You’re Paying for It
March 14, 2018 —
Christopher Flavelle – BloombergAfter last year’s calamity, officials are making the same decisions that put homeowners at risk in the first place.
At the rugged eastern edge of Sonoma County, where new homes have been creeping into the wilderness for decades, Derek Webb barely managed to save his ranch-style resort from the raging fire that swept through the area last October. He spent all night fighting the flames, using shovels and rakes to push the fire back from his property. He was even ready to dive into his pool and breathe through a garden hose if he had to. His neighbors weren’t so daring—or lucky.
On a recent Sunday, Webb wandered through the burnt remains of the ranch next to his. He’s trying to buy the land to build another resort. This doesn’t mean he thinks the area won’t burn again. In fact, he’s sure it will. But he doubts that will deter anyone from rebuilding, least of all him. “Everybody knows that people want to live here,” he says. “Five years from now, you probably won’t even know there was a fire.”
As climate change creates warmer, drier conditions, which increase the risk of fire, California has a chance to rethink how it deals with the problem. Instead, after the state’s worst fire season on record, policymakers appear set to make the same decisions that put homeowners at risk in the first place. Driven by the demands of displaced residents, a housing shortage, and a thriving economy, local officials are issuing permits to rebuild without updating building codes. They’re even exempting residents from zoning rules so they can build bigger homes.
Read the court decisionRead the full story...Reprinted courtesy of
Christopher Flavelle, Bloomberg
Biden Administration Issues Buy America Guidance for Federal Infrastructure Funds
April 25, 2022 —
Garret Murai - California Construction Law BlogAs you know, late this past year Congress passed and President Biden signed the largest infrastructure bill since President Franklin D. Roosevelt’s “New Deal” in 1933. The infrastructure bill provides $1.2 trillion in spending on the nations’ infrastructure over the next five years.
On Monday, the Biden Administration issued Initial Implementation Guidance requiring that, beginning May 14, 2022, materials paid for with infrastructure bill funds be made in America. The Guidance, which implements the “Buy America” provisions of the infrastructure bill requires that:
1. All iron and steel used in a project be produced in the United States;
Read the court decisionRead the full story...Reprinted courtesy of
Garret Murai, Nomos LLPMr. Murai may be contacted at
gmurai@nomosllp.com
10 Safety Tips for General Contractors
October 09, 2018 —
Eric Weisbrot – JW Surety BondsThe construction industry continues to grow each year, paving the way for general contractors to make a profitable, sustainable living when the job is done right. However, to do so effectively, safety standards need to be met with consistency and focus on each worksite. General
contractors who are licensed and bonded must take proactive steps to avoid potentially fatal injuries among their subcontractors and employees, even though this may be easier said than done. To create and maintain a safe worksite each and every time, general contractors should consider how to implement the following best practices and safety tips on the job.
1 – Know the Risks
The most crucial step toward maintaining a safe construction site is to first be aware of the risks involved. Each year, thousands of
construction workers experience injuries on the job, and some ultimately lose their life because of safety missteps at work. As a general contractor, it is your responsibility to know that construction risks run rampant given the nature of the work. Being tuned into the potential for falls, slips, and other common safety-related incidents is a necessary part of operating a safe worksite for you and your employees.
2 – Require Protective Gear
An often overlooked safety precaution on construction sites is the use of up-to-date and well-maintained protective gear. For many subcontractors and employees, it is easy to skip this necessary step in safeguarding themselves from potential safety issues. However, general contractors can take steps to make protective gear a requirement on the job. This may include mandating hardhats and steel-toed shoes, gloves, and eyewear when appropriate. All visitors and workers on a construction site should follow protective gear instructions to avoid unnecessary safety risks.
3 – Educate on Ladder Safety
According to the Bureau of Labor Statistics, ladder injuries account for a significant number of construction worker incidents each year, making up more than 200,000 accidents on average. Ladders have continuously ranked high on OSHA’s list of violations at construction sites because the prevalence of injuries is so high. General contractors can help thwart ladder-related injuries among workers by promoting ladder safety training, including reminders about the right ladder to use for each task. Workers should also be well aware of the importance of inspection before use, and they should always follow the three points of contact rule when going up or down a ladder.
4 – Recognize Equipment Pitfalls
Many construction workers experience injuries relating to equipment used on the job. This could be tied to getting on or off equipment, or loading and unloading materials from machinery. In any case, general contractors can encourage simple tactics to improve equipment safety measures. Paying close attention to secure footing while getting on or off a machine, having more than one person assist with loading and unloading, and ensuring everyone feels comfortable asking for help with these tasks reduces safety risks.
5 – Document Potential Hazards
A general contractor’s main responsibility is to manage the construction site efficiently from start to finish. Part of this duty is recognizing the possible issues on a worksite that may lead to accidents or injuries if not addressed at the beginning of a project. It is necessary to take the time to identify safety risks such as unstable working surfaces, dangerous trenches, or weather-related concerns that may impact the safety of subcontractors, suppliers, or other site visitors. Potential hazards should be documented and shared with site workers, and they should be updated as the project progresses.
6 – Maintain Equipment and Tools
Poorly maintained equipment and tools also cause issues on construction sites. The Infrastructure Health and Safety Association suggests that general contractors
remind workers to inspect tools, machines, handheld equipment, and vehicles before each use to ensure they are properly maintained. Additionally, understanding the maintenance standards for certain tools or equipment and following those guidelines is crucial to reducing injury on the job.
7 – Minimize Crowds
Crowded work areas can be a serious safety issue for general contractors, subcontractors, and vendors and suppliers on site. It is common for crowds to gather during the use of heavy equipment or when a significant task is being completed. However, general contractors should discourage crowd-forming for spectating purposes. This can be done by limiting the number of people allowed to be in an area when certain activities are taking place, and enforcing these rules at every possible opportunity.
8 – Hire Licensed Subcontractors
General contractors may have full- or part-time employees as part of their business model, or there may be a heavy presence of subcontractors not directly tied to the main business. In either case, it is essential to have faith in the capabilities of workers, including their willingness and commitment to follow safety standards. General contractors can help ensure each worker is more likely to take safety seriously when they hire licensed contractors who follow through with
licensing requirements as mandated by the state or city.
9 – Focus on Training
Even after vetting subcontractors and employees based on their licensing status, general contractors also need to ensure training and education are a priority. Several online and in-person courses focus on construction safety training which workers should be encouraged to attend. Safety
education programs from OSHA and other reputable sources are crucial to decreasing accidents on the job.
10 – Be Present
Finally, general contractors can only have an impact on the safety of the job site when they are purposefully present. It is common for some GCs to stop by a project when they are needed or to check on progress periodically. However, new safety hazards, lacking worker training, and other risks are not easily fixed when the general contractor is not consistently on site. Reducing the potential for falls, slips, trips, and fatalities on the job requires communication with workers, and that takes place most effectively when general contractors are in person.
Eric Weisbrot is the Chief Marketing Officer of JW Surety Bonds. With years of experience in the surety industry under several different roles within the company, he is also a contributing author to the surety bond blog.
Read the court decisionRead the full story...Reprinted courtesy of
