The Risks and Rewards of Sustainable Building Design
July 25, 2021 —
Caroline A. Harcourt & Adam Weaver - Gravel2GavelThe shift towards a “greener” environment has resulted in cities and states implementing electrification mandates, which will have a major impact on both current and future building design. Currently, most commercial and residential end users are already all-electric. However, there are some exceptions, such as space and water heating, that use a significant amount of energy. Several states, including California and New York, have cities that have introduced legislation requiring new construction to be all-electric. This means, for example, using electricity for heating rather than fossil fuels such as natural gas. Mandate or not, building owners and developers should consider the risks and rewards of an all-electric design.
General Rewards
- Reaching Climate Goals: As part of the Clean Energy Plan, as described in a previous post, President Biden has created a goal for the United States of achieving a carbon pollution-free American utility sector by 2035. Because residential and commercial building account for 40 percent of energy consumption in the United States, all-electric building designs will help governments and businesses reach the ambitious climate goals that have been set for the coming years.
Reprinted courtesy of
Caroline A. Harcourt, Pillsbury and
Adam Weaver, Pillsbury
Ms. Harcourt may be contacted at caroline.harcourt@pillsburylaw.com
Mr. Weaver may be contacted at adam.weaver@pillsburylaw.com
Read the court decisionRead the full story...Reprinted courtesy of
Haight’s San Diego Office is Growing with the Addition of New Attorneys
June 21, 2024 —
Haight Brown & Bonesteel LLPThe San Diego office has recently added two attorneys to the team.
Amanda McKechnie has joined the Construction Law Practice Group. Amanda has extensive experience representing national developers, owners, general contractors, design professionals and subcontractors in complex construction litigation.
Arash Yahyai has joined the Construction Law and General Liability Practice Groups. Arash focuses on defending actions involving complex construction defect, insurance defense, premises liability, product liability, catastrophic personal injury and other general liability related cases.
Read the court decisionRead the full story...Reprinted courtesy of
Haight Brown & Bonesteel LLP
Homebuilding Design Goes 3D
June 17, 2015 —
Beverley BevenFlorez-CDJ STAFFThe Houston Business Journal reported that some home builders are using new computer visualization technology to create 3D representations of home designs. Autodesk Revit not only helps the buyer visualize the home, but it also catches architectural design mistakes and can help homebuilders quantify all of the building materials necessary for a particular model.
Mollie Silver, a senior designer with On Point Custom Homes, uses Autodesk Revit. “It changes the game for our clients, because this gives them a really good idea of what their home will look like in real life,” Silver told the Houston Business Journal. “If you give them floor plans, it just doesn’t give them the same idea.”
Read the court decisionRead the full story...Reprinted courtesy of
“You Can’t Make Me Pay!”
January 28, 2025 —
Daniel Lund III - LexologySeveral years ago, Louisiana enacted a law prescribing a mandamus proceeding for unpaid contract sums purportedly owed by a public entity to a contractor – Louisiana Revised Statute 38:2191. The statute tackles both progress payments and final payment, distinguishing between the two and allowing withholding of a progress payment when there is “reasonable cause” to do so.
On the other hand, at least one Louisiana appellate decision held on the topic of final payment: once a final payment amount is “due” per the statute – based upon passage expiration of the lien period following “formal final acceptance” – the act of making the final payment is purely ministerial and not subject to defenses. According to that court, a defense to payment based on assessed liquidated damages – because the damages were disputed by the contractor – could not trump the essence of the statute allowing the contractor to pursue mandamus to collect the final payment.
More recently, on a public works levee project in Lafourche Parish, a dispute arose during the work concerning the means to secure material for constructing the levees. The net effect of the dispute entailed a major change in the contract price.
Read the court decisionRead the full story...Reprinted courtesy of
Daniel Lund III, PhelpsMr. Lund may be contacted at
daniel.lund@phelps.com
Summary Judgment in Favor of General Contractor Under Privette Doctrine Overturned: Lessons Learned
March 27, 2023 —
Garret Murai - California Construction Law BlogIt seems like we’ve been seeing a lot of Privette doctrine cases recently. Here’s another,
Brown v. Beach House Design & Development, 85 Cal.App.5th 516 (2002), which provides a cautionary tale for general contractors to watch what they include in their scope of work and how they manage projects.
The Beach House Case
Kyle Brown was a carpenter employed by subcontractor O’Rourke Construction, Inc. who contracted with general contractor Beach House Design and Development to provide finish carpentry on a construction project. A&D Plastering Co., another subcontractor on the project, had erected scaffolding on the project.
On June 16, 2017, while using A&D’s scaffolding, Brown fell onto a concrete walkway where he suffered severe injuries. Following the accident, Beach House and A&D inspected the scaffolding and found that some of the scaffolding was not properly secured to the building and that planks, crossbars, ties and guardrails had been cut or were missing.
Read the court decisionRead the full story...Reprinted courtesy of
Garret Murai, Nomos LLPMr. Murai may be contacted at
gmurai@nomosllp.com
Builders Beware: Smart Homes Under Attack by “Hide ‘N Seek” Botnet
October 30, 2018 —
Scott L. Satkin & Amtoj S. Randhawa - Newmeyer & Dillion LLPGerman manufacturer eQ-3 has found itself under siege by a botnet known as "Hide 'N Seek." This pernicious malware has infected tens of thousands of eQ-3's smart home devices by compromising the device's central control unit. Once a device has been infected, the malware spreads to other Internet of Things ("IoT") devices connected to the same wireless network. IoT devices have become the prime target for botnet attacks. As opposed to computers, laptops, or other larger computing devices, the smaller storage capacity and lower processing power of IoT devices limit the amount and complexity of the security measures that can be installed—making them an easier target for botnets.
What is a Botnet?
For those unfamiliar with the term, a botnet is a network of devices infected with a malware program allowing the infector to control and/or exploit the devices. Once a suitable number of devices are infected, the person or group controlling the botnet can harness the computing power of each infected device to perform activities which were previously constrained by a single device's capabilities (i.e. DDoS attacks, spamming, cryptocurrency mining, etc.).
Hide 'N Seek – History and Capabilities
The Hide 'N Seek botnet first appeared in January 2018 and has since spread rapidly. Its sophisticated design and capabilities have captivated the attention of many security watchdogs and researchers. While many botnets are designed to be "quick and dirty" (i.e. infect a few devices, eke out a little profit, and inevitably be cleared out or rendered ineffective by security updates and fixes), Hide 'N Seek was designed to maintain itself in the host's system indefinitely. When it was first released, Hide 'N Seek primarily targeted certain routers and internet-enabled security cameras; however, it has now began targeting digital video recorders, database servers, and most recently, smart home hubs.
Hide 'N Seek's communication capabilities are also more advanced than previous botnets. Previous botnets relied on existing communications protocols to communicate with other another, but Hide 'N Seek uses a custom-built peer-to-peer system to communicate. This advancement allows Hide 'N Seek to spread more rapidly than previous botnets.
Hide 'N Seek is also capable of extracting a device owner's personal information (i.e. name, address, e-mail, telephone numbers, etc.) whereas previous botnets were not. Most importantly, Hide 'N Seek is consistently updated to increase its infection rate, decrease its detection probability, and bypass any security measures designed to detect and remove it from the system. This modularity has proved to be Hide 'N Seek's greatest strength.
Protecting Against Hide 'N Seek and Other Botnets
While many of the precautions will undoubtedly come from the device manufactures vis-à-vis software programming and updates, homebuilders can still take some precautions to protect their customers.
- When selecting a smart home system to incorporate into a home's construction, be sure to evaluate its security features including, but not limited to its: wireless connectivity, password/passphrase requirements, interconnectedness with other IoT devices, etc. Third-party reviews from tech-oriented outlets will likely have useful information on a device's security measures, vulnerabilities, and any recent security compromises.
- Be vigilant in installing any eQ-3 smart home systems. The extent of the damage caused by Hide 'N Seek botnet remains unknown, as does damage from other potentially-infected technology. Thus, it may be prudent to avoid installing any eQ-3 device until it becomes evident that the threat has been neutralized and all security vulnerabilities have been remedied.
- If a builder uses technology other than eQ-3, precautions must be taken. Ensure that technology providers are thoroughly researched. It is also recommended to include strong contractual indemnity provisions, and require vendors to carry cyber-specific insurance policies.
- Homebuilders should consider purchasing their own stand alone cyber liability policies as a safety net, should potential exposure arise.
Scott Satkin and Amtoj Randhawa are associates in the Cybersecurity group of Newmeyer & Dillion. Focused on helping clients navigate the legal dispute implications of cybersecurity, they advise businesses on implementing and adopting proactive measures to prevent and neutralize cybersecurity threats. For questions on how they can help, contact Scott at scott.satkin@ndlf.com and Amtoj at amtoj.randhawa@ndlf.com.
Read the court decisionRead the full story...Reprinted courtesy of
Yet Another Reminder that Tort and Contract Don’t Mix
January 25, 2021 —
Christopher G. Hill - Construction Law MusingsI have stated on numerous occasions here at Musings that in Virginia, contract claims and tort claims (read fraud) don’t mix. A recent case from the Federal District Court for the Eastern District of Virginia presents another example of this principle. In Itility LLC v. The Staffing Resource Group, Judge Ellis of the Alexandria Division, considered ITility’s claims of fraud and breach of contract against SRG and one of its officers based upon SRG’s alleged violation of its duties under a teaming agreement. The claim by ITility was that TSRG provided false and misleading resumes and thus damaged ITility. SRG filed a Motion to Dismiss and the Court was therefore required to resolve the following issues: (1) whether plaintiff’s fraud claim is barred by Virginia’s “source of duty” rule; (2) whether plaintiff’s claim for tortious interference with a business expectancy is barred by SRG’s participation in the business expectancy, and (3) whether the teaming agreement between the parties bars plaintiff’s claims for consequential and punitive damages.
Reprinted courtesy of
The Law Office of Christopher G. Hill
Mr. Hill may be contacted at chrisghill@constructionlawva.com
Read the full story... Read the court decisionRead the full story...Reprinted courtesy of
Unintended Consequences of New Building Products and Services
April 19, 2022 —
David S. Jaffe – National Association of Home BuildersAs home builders throughout the United States are grappling with building material price surges, and shortages or delays for certain orders, many are exploring alternatives products to complete or start projects. For example, according to a recent article, some builders are constructing homes from natural materials such as rammed earth, adobe brick, and volcanic rock. In addition to being readily available on site there may be heating and cooling benefits due to the natural insulation provided by these materials. The article cautions, however, that using these alternative materials may come with added challenges such as higher costs due to a need for skilled labor, delays by home inspectors who may be unfamiliar with the techniques and methods of construction, and energy consultants who might have difficulty calculating the value of homes with these materials. See Home Builders Are Turning to Natural Materials to Get Around Supply Chain Problems; There are advantages to buying homes made with natural materials, but expect to pay a premium, Alanna Schubach, Mansion Global (March 25, 2022).
Another caution, not addressed in the article, however, but one that should be heeded by builders considering alternative materials, is the unintended consequences that might result from using alternative products, whether they are natural products or any others. The long-term effects of material use should not be ignored.
For instance, it has been reported that earthen materials are known to contain numerous organic substances and can also harbor mold. It was not too long ago that mold was a high liability issue for builders and property owners. Similarly, the use of rapidly renewable materials - products that can be produced naturally and quickly from nature - is a key component of green building. They are also cellulose or carbohydrate-based products and as such are typically optimal food sources for mold in the presence of moisture.
To avoid mold, it is important to understand the relationship between construction materials and their susceptibility to mold in the presence of moisture. “Buildings will never be designed, built, maintained, or utilized perfectly; and weather and natural disasters cannot be predicted. The one thing we can have complete control over, the materials within the building, should be selected wisely.” See Mold Susceptibility of Rapidly Renewable Building Materials Used in Wall Construction, AM Cooper, Master's thesis, Texas A&M University (2007) (Samples of wool, cork, straw, and cotton-- rapidly renewable materials used as exterior wall insulation products--were exposed to different moisture amounts in an encapsulated environment, representing the environment within a wall cavity when exposed to water from pipes, leaks, condensation and absorption, or from initial construction. The samples were monitored over time for mold growth).
Mold-related issues are just one example of the potential for unintended consequences from the use of alternative materials. Carefully reviewing building material choices in advance may help eliminate non-conforming building materials, returns and possibly disputes. NAHB has developed a guide,
Assessing Building Materials, for builders who may not have their own review process for gathering information from manufacturers and distributors when considering the selection of new building materials.
The guide is intended to arm members with the most important factor when evaluating new materials or products: information. Use the guide to step through the information collection process to make an informed decision on deploying new products or materials. The guide is not intended to be exhaustive or all-inclusive, but it will help builders ask the right questions and seek the most relevant information.
Copyright © 2022 by the National Association of Home Builders of the United States. All rights reserved.
Read the court decisionRead the full story...Reprinted courtesy of
David S. Jaffe, NAHBMr. Jaffe may be contacted at
DJaffe@nahb.org
