Fairfield Connecticut Building Expert Directory

New World to Demolish Luxury Hong Kong Towers in Major Setback

August 04, 2021 — Shawna Kwan - Bloomberg
New World Development Co. will demolish two towers at Hong Kong’s most popular housing development in decades and compensate buyers after finding unexpected defects, in a major setback for the real estate company. The developer will pull down and rebuild the existing floors of Towers 1 and 8 at its Pavilia Farm III project near Tai Wai station after it found the concrete strength in some areas did not meet design requirements, the Hong Kong-based company said in a statement. Shares of New World fell as much as 4.8% Thursday in Hong Kong, the most in more than seven months, before recovering to close 3.9% lower. Read the court decision
Read the full story...
Reprinted courtesy of Shawna Kwan, Bloomberg

Inside New York’s Newest Architectural Masterpiece for the Mega-Rich

May 20, 2015 — Oshrat Carmiel – Bloomberg
The newest condominium tower in midtown Manhattan's billionaires district is ready to open its doors to buyers. It took almost a decade to get there. The skyscraper at 53 W. 53rd St., designed by French architect Jean Nouvel and rising next to the Museum of Modern Art, will start marketing its 139 apartments next week, with prices starting at $3 million. Planned since 2006, the project endured the real estate bust and a global financial crisis that decimated demand for luxury homes. Now it's emerging when buyers can't seem to get enough of them. "We're very eager to begin,'' said David Penick, the New York-based managing director for developer Hines, which is building the project with Goldman Sachs Group and Singapore-based Pontiac Land Group. "We're confident in what we have to sell in the market we're in, and we'll see how it goes.'' Read the court decision
Read the full story...
Reprinted courtesy of Oshrat Carmiel, Bloomberg

Courthouse Reporter Series: The Travails of Statutory Construction...Defining “Labor” under the Miller Act

August 01, 2023 — Brendan J. Witry - The Dispute Resolver
In a recent case—United States ex rel. Dickson v. Fidelity & Deposit Co. of Maryland (“Dickson”)—the U.S. Court of Appeals for the Fourth Circuit recently re-examined and defined what work qualifies as “labor” under the Miller Act. United States ex rel. Dickson v. Fidelity & Deposit Co. of Maryland, No. 21-160, 67 F.4th 182 (4th Cir. April 26, 2023) (slip op.). Unlike private projects, unpaid subcontractors cannot encumber the federal government’s property with mechanics liens. Instead, the Miller Act provides a remedy for subcontractors in the form of a payment bond on all federal public works contracts exceeding $100,000. 40 U.S.C. § 3131(b). In the Dickson case, Claimant Elliot Dickson served as a subcontractor to Forney Enterprises (“Forney”), with whom the Department of Defense (the “DOD”) contracted to renovate several staircases and the fire suppression systems at the Pentagon. Read the court decision
Read the full story...
Reprinted courtesy of Brendan J. Witry, Conway & Mrowiec Attorneys LLLP
Mr. Witry may be contacted at bjw@cmcontractors.com

Documenting Contract Changes in Construction

December 07, 2020 — J.D. Holzheauser - Construction Executive
Construction projects are almost inevitably subject to changes in the contract. A fundamental understanding of construction changes, how those changes are governed and what is necessary to ensure a complete change are of paramount importance to all parties involved in a construction project. This article is not a treatise on construction contract changes; rather, it provides advice on actions a contractor can take during construction that will help the contractor recover time or money when a contract’s schedule or scope of work needs to be changed. Changes Defined Changes to a construction project affect two broad spheres—timing and scope of work. Changes usually present themselves as either a change order or a change directive. Each may go by a different name depending on the contractual scheme in the project’s prime contract, but they essentially have the same characteristics. The difference between a change order and a change directive is one of agreement. A change order (in the owner-prime contractor context) occurs when the contractor and the owner agree to a change in the timing or scope of work in the contract. Normally, the change order is a written agreement to change the contract and is executed by the contractor and owner. Reprinted courtesy of J.D. Holzheauser, Construction Executive, a publication of Associated Builders and Contractors. All rights reserved. Mr. Holzheauser may be contacted at jdholzheauser@pecklaw.com Read the court decision
Read the full story...
Reprinted courtesy of

New Green Standards; Same Green Warnings for Architects & Engineers (law note)

January 13, 2014 — Melissa Dewey Brumback - Construction Law in North Carolina
The newest version of the LEED ratings system, LEED v4, has officially been released. For a comparison of the major changes between LEED 2009 and LEEDv4, check out this downloadable form from the USGBC. As the folks at Schinnerer’s pointed out, there is one major change that is fraught with peril for design professionals– the requirement for increased transparency concerning the composition and performance requirements of composition materials. Notes the insurance carrier: “While design firms always had a level of responsibility for ongoing product research, the lack of standardized, affirmative industry data made it difficult for design firms and project owners to assess the impact of building materials on human health. “As with many aspects of sustainability in design and construction, the danger to design firms is likely to come from self-inflicted perils. When a firm accepts responsibility to ‘ensure that a project meets its goals by using the best products that align with project requirements,’ it is essentially giving the project owner a guarantee that is both beyond the firm’s control and uninsurable by any insurance carried by a firm.” Read the court decision
Read the full story...
Reprinted courtesy of Melissa Dewey Brumback
Ms. Brumback can be contacted at mbrumback@rl-law.com

Mortgage Bonds Stare Down End of Fed Easing as Gains Persist

October 29, 2014 — Jody Shenn – Bloomberg
The end of the Federal Reserve’s third round of bond purchases is proving to be a non-event for mortgage-backed debt. That’s partly because even though the U.S. central bank won’t be adding more home-loan securities to its balance sheet, policy makers will still be buying enough to prevent its holdings from shrinking. Those purchases are having a greater impact as the pace of net issuance slows to a quarter of the amount last year amid a weaker property market. The $5.4 trillion market for government-backed mortgage bonds is defying predictions for a slump tied to the wind-down of the Fed stimulus program, whose completion economists predict will be announced today. Yields on benchmark Fannie Mae (FNMA) notes have shrunk 0.14 percentage point this year relative to government debt, narrowing to within 1.09 percentage points of an average of five- and 10-year Treasury rates. Read the court decision
Read the full story...
Reprinted courtesy of Jody Shenn, Bloomberg
Ms. Shenn may be contacted at jshenn@bloomberg.net

Designing the Process to Deliver Zero-Carbon Construction – Computational Design in Practice

January 04, 2023 — Peter Debney - AEC Business
Computational Design is generating increasing interest in the construction industry as well as a certain amount of confusion. It is not parametric design; instead it takes parametric design to the next level. It is a set of methods that will define how we design structures over the next decades. With Computational Design, you don’t design the building; you design the automated process to find the best building design. Why use Computational Design? Computational Design is enabling us to create buildings that are far more efficient than we can manage using more traditional methods. Some architects are indeed using it to produce novel building forms, but its great advantage is in helping us towards efficient, zero-carbon construction. Read the court decision
Read the full story...
Reprinted courtesy of Peter Debney, AEC Business

Colorado House Bill 19-1170: Undefined Levels of Mold or Dampness Can Make a Leased Residential Premises Uninhabitable

April 03, 2019 — Steve Heisdorffer - Colorado Construction Litigation
One of the 407 bills the Colorado legislature is considering as of the date of this blog post is House Bill 19-1170, the Residential Tenants Health and Safety Act, which can be found at https://leg.colorado.gov/bills/hb19-1170 and clicking on the link for the recent bill text. The bill passed the House on February 26 and is in the Senate for consideration. The bill currently adds two substantive conditions to those conditions that make a residential premises uninhabitable. One is the lack of functioning appliances that conformed to applicable law when installed and that are maintained in good working order. The second is “mold that is associated with dampness, or there is any other condition causing the premises to be damp, which condition, if not remedied, would materially interfere with the health or safety of the tenant…,” referred to here as “the mold or dampness provision.” The bill also amends various procedural provisions of Colorado law to make enforcement by a tenant easier and broadens tenant remedies. The bill grants jurisdiction to county and small claims courts to grant injunctions for breach. This article focuses on the mold or dampness provision. The mold or dampness provision is vague and will likely lead to abuse. First, there is mold everywhere. While expert witnesses routinely testify about the level of exposure that is unacceptable, no generally accepted medical standards for an unacceptable level of mold exposure currently exist, and each person reacts to mold differently. There is no requirement in the bill that mold exposure exceed levels that are generally considered harmful by experts in the field, or even in excess of naturally occurring background levels. Second, some sources estimate that there are over 100,000 different species of mold. No harmful effects have been shown for many species of mold, while other species of mold are considered harmful. Read the court decision
Read the full story...
Reprinted courtesy of Steve Heisdorffer, Higgins, Hopkins, McLain & Roswell
Mr. Heisdorffer may be contacted at heisdorffer@hhmrlaw.com

FAIRFIELD CONNECTICUT BUILDING EXPERT DIRECTORY AND CAPABILITIES