White and Williams LLP Secures Affirmation of Denial to Change Trial Settings Based on Plaintiffs’ Failure to Meet the Texas Causation Standard for Asbestos Cases
July 06, 2020 —
Christian Singewald & Rochelle Gumapac - White and Williams LLPThe Delaware Supreme Court, in a rare split opinion, affirmed the trial court’s denial of Plaintiffs’ Request to Change Trial Settings in favor of all defendants, including a major automotive manufacturer represented by White and Williams LLP, in a mesothelioma case with a young decedent who had an alleged economic loss claim exceeding $9,000,000, in Shaw v. American Friction, Inc. et al., No. 86, 2019. This decision operates to dismiss all of Plaintiffs’ claims based on their failure to meet Delaware’s strict expert deadlines and establish a prima facie case under Texas law.
Plaintiffs’ Complaint invoked the application of Texas substantive law and alleged that multiple manufacturers were negligent and strictly liable for failing to warn the decedent of the alleged dangers posed by the use of asbestos-containing products. Plaintiffs’ alleged asbestos exposures from defendants’ products caused Mr. Shaw’s disease and subsequent death.
In 2007, Texas instituted its now well-known causation requirement, which requires the “dose” of asbestos exposure from each defendant’s products to be quantified by an expert. Borg-Warner Corp. v. Flores, 232 S.W.3d 765, 773 (Tex. 2007). Prior to decedent’s death, Plaintiffs’ counsel deposed decedent and his father for product identification purposes. During the depositions, Plaintiffs’ counsel failed to obtain the necessary factual information from his clients for an expert to be able to opine as to alleged exposure doses from any defendant’s product. Despite lacking the requisite information for a prima facie case under Texas law, Plaintiffs sought and were given placement in an expedited trial setting, which had strict, defined deadlines.
Reprinted courtesy of
Christian Singewald, White and Williams LLP and
Rochelle Gumapac, White and Williams LLP
Mr. Singewald may be contacted at singewaldc@whiteandwilliams.com
Ms. Gumapac may be contacted at gumapacr@whiteandwilliams.com
Read the court decisionRead the full story...Reprinted courtesy of
Another Guilty Plea In Nevada Construction Defect Fraud Case
April 25, 2012 —
CDJ STAFFThe eleventh defendant has entered a guilty plea in the ongoing federal investigation of construction defect fraud in the Las Vegas area. Mahin Quintero plead guilty to producing a false authentication feature, a misdemeanor. Ms. Quintero’s part in the scheme was to falsely authenticate signatures on loan documents for straw buyers. Ms. Quintero stated in court that she had been ordered to destroy her notary book three years ago. According to her plea bargain, the straw buyers did not appear in front of her when she notarized their signatures. As part of the scheme, the straw buyers would take control of homeowners associates, sending construction defect complaints and repairs to favored firms.
Read the full story…
Read the court decisionRead the full story...Reprinted courtesy of
Florida Passes Tort Reform Bill
April 10, 2023 —
William Doerler - The Subrogation StrategistOn Friday, March 24, 2023, Florida’s governor, Ron DeSantis, signed into law a tort reform bill, HB 837. The bill impacts, among other things, bad faith actions and attorney’s fee awards. Of particular importance to subrogation professionals are provisions impacting comparative fault, the statute of limitations and premises liability with respect to the criminal acts of third persons.
With respect to the statute of limitations, the bill amended Fla. Stat. § 95.11(3) and (4), to reduce the statute of limitations for negligence actions from four (4) years to two (2) years.
As for comparative fault, Fla. Stat. § 768.81 was amended to move Florida from a pure comparative fault jurisdiction for negligence actions to a modified comparative fault jurisdiction. Pursuant to § 768.81(6), as revised, in a negligence action subject to that section, “any party found to be greater than 50 percent at fault for his or her own harm may not recover any damages.” Section 768.81(6), however, does not apply to actions for damages for personal injury or wrongful death arising out of medical negligence.
Read the court decisionRead the full story...Reprinted courtesy of
William Doerler, White and Williams LLPMr. Doerler may be contacted at
doerlerw@whiteandwilliams.com
Building Stagnant in Las Cruces Region
November 20, 2013 —
CDJ STAFFThere was an increase in the number of building permits issued in Las Cruces, New Mexico through the first ten months of 2013, but the 2,162 permits represent only a minimal increase over last year’s 2,158 permits. To make matters worse for building suppliers and workers, builders can “pull all the permits for a subdivision at one time but might not start some of those for six months,” said Lee Rawson, the owner of Rawson Builders Supply.
For a comparison, during the building boom of 2006, Las Cruces issued 3,529 building permits. The values are down too. Although fewer permits were issued in 2012, their valuation was $147 million, while the marginally larger number in 2013 is worth only $128 million.
As a result, the area is losing skilled labor. After 25 consecutive months of declining construction, workers are leaving the construction industry. Mr. Rawson noted that “you can’t just go find that skilled labor, it doesn’t exist.”
Read the court decisionRead the full story...Reprinted courtesy of
Retired Judge Claims Asbestos in Courthouse gave him Cancer
November 05, 2014 —
Beverley BevenFlorez-CDJ STAFFAmos Saunders, retired Passaic County, New Jersey, Superior Court judge claimed "he got cancer as a result of coming into contact with asbestos at the courthouse during his time on the bench," the New Jersey Law Journal reported.
Saunders alleged "that he was exposed to asbestos throughout his tenure, up to and including an asbestos removal project at the Paterson, N.J., courthouse in the 1980s." The complaint filed, as quoted in the New Jersey Law Journal, stated that "he has been diagnosed with adenocarcinoma 'as a direct and proximate result' of 'inhalation and ingestion of dust particles and fibers' from asbestos products."
According to the complaint, A. H. Environment Inc. was the contractor and Alaimo Group was the consulting engineer.
Read the court decisionRead the full story...Reprinted courtesy of
10 Safety Tips for General Contractors
October 09, 2018 —
Eric Weisbrot – JW Surety BondsThe construction industry continues to grow each year, paving the way for general contractors to make a profitable, sustainable living when the job is done right. However, to do so effectively, safety standards need to be met with consistency and focus on each worksite. General
contractors who are licensed and bonded must take proactive steps to avoid potentially fatal injuries among their subcontractors and employees, even though this may be easier said than done. To create and maintain a safe worksite each and every time, general contractors should consider how to implement the following best practices and safety tips on the job.
1 – Know the Risks
The most crucial step toward maintaining a safe construction site is to first be aware of the risks involved. Each year, thousands of
construction workers experience injuries on the job, and some ultimately lose their life because of safety missteps at work. As a general contractor, it is your responsibility to know that construction risks run rampant given the nature of the work. Being tuned into the potential for falls, slips, and other common safety-related incidents is a necessary part of operating a safe worksite for you and your employees.
2 – Require Protective Gear
An often overlooked safety precaution on construction sites is the use of up-to-date and well-maintained protective gear. For many subcontractors and employees, it is easy to skip this necessary step in safeguarding themselves from potential safety issues. However, general contractors can take steps to make protective gear a requirement on the job. This may include mandating hardhats and steel-toed shoes, gloves, and eyewear when appropriate. All visitors and workers on a construction site should follow protective gear instructions to avoid unnecessary safety risks.
3 – Educate on Ladder Safety
According to the Bureau of Labor Statistics, ladder injuries account for a significant number of construction worker incidents each year, making up more than 200,000 accidents on average. Ladders have continuously ranked high on OSHA’s list of violations at construction sites because the prevalence of injuries is so high. General contractors can help thwart ladder-related injuries among workers by promoting ladder safety training, including reminders about the right ladder to use for each task. Workers should also be well aware of the importance of inspection before use, and they should always follow the three points of contact rule when going up or down a ladder.
4 – Recognize Equipment Pitfalls
Many construction workers experience injuries relating to equipment used on the job. This could be tied to getting on or off equipment, or loading and unloading materials from machinery. In any case, general contractors can encourage simple tactics to improve equipment safety measures. Paying close attention to secure footing while getting on or off a machine, having more than one person assist with loading and unloading, and ensuring everyone feels comfortable asking for help with these tasks reduces safety risks.
5 – Document Potential Hazards
A general contractor’s main responsibility is to manage the construction site efficiently from start to finish. Part of this duty is recognizing the possible issues on a worksite that may lead to accidents or injuries if not addressed at the beginning of a project. It is necessary to take the time to identify safety risks such as unstable working surfaces, dangerous trenches, or weather-related concerns that may impact the safety of subcontractors, suppliers, or other site visitors. Potential hazards should be documented and shared with site workers, and they should be updated as the project progresses.
6 – Maintain Equipment and Tools
Poorly maintained equipment and tools also cause issues on construction sites. The Infrastructure Health and Safety Association suggests that general contractors
remind workers to inspect tools, machines, handheld equipment, and vehicles before each use to ensure they are properly maintained. Additionally, understanding the maintenance standards for certain tools or equipment and following those guidelines is crucial to reducing injury on the job.
7 – Minimize Crowds
Crowded work areas can be a serious safety issue for general contractors, subcontractors, and vendors and suppliers on site. It is common for crowds to gather during the use of heavy equipment or when a significant task is being completed. However, general contractors should discourage crowd-forming for spectating purposes. This can be done by limiting the number of people allowed to be in an area when certain activities are taking place, and enforcing these rules at every possible opportunity.
8 – Hire Licensed Subcontractors
General contractors may have full- or part-time employees as part of their business model, or there may be a heavy presence of subcontractors not directly tied to the main business. In either case, it is essential to have faith in the capabilities of workers, including their willingness and commitment to follow safety standards. General contractors can help ensure each worker is more likely to take safety seriously when they hire licensed contractors who follow through with
licensing requirements as mandated by the state or city.
9 – Focus on Training
Even after vetting subcontractors and employees based on their licensing status, general contractors also need to ensure training and education are a priority. Several online and in-person courses focus on construction safety training which workers should be encouraged to attend. Safety
education programs from OSHA and other reputable sources are crucial to decreasing accidents on the job.
10 – Be Present
Finally, general contractors can only have an impact on the safety of the job site when they are purposefully present. It is common for some GCs to stop by a project when they are needed or to check on progress periodically. However, new safety hazards, lacking worker training, and other risks are not easily fixed when the general contractor is not consistently on site. Reducing the potential for falls, slips, trips, and fatalities on the job requires communication with workers, and that takes place most effectively when general contractors are in person.
Eric Weisbrot is the Chief Marketing Officer of JW Surety Bonds. With years of experience in the surety industry under several different roles within the company, he is also a contributing author to the surety bond blog.
Read the court decisionRead the full story...Reprinted courtesy of
Real Estate & Construction News Roundup (4/17/24) – Travel & Tourism Reach All-Time High, President Biden Emphasizes Housing in SOTU Address, and State Transportation Projects Under Scrutiny
May 13, 2024 —
Pillsbury's Construction & Real Estate Law Team - Gravel2Gavel Construction & Real Estate Law BlogIn our latest roundup, Airbnb advocates for new short-term rental rules, the U.S. Supreme Court rules on hefty development fees, loan losses becomes a greater issue for banks, and more!
Read the court decisionRead the full story...Reprinted courtesy of
Pillsbury's Construction & Real Estate Law Team
Negligence Per Se Claim Based Upon Failure to Pay Benefits Fails
December 21, 2016 —
Tred R. Eyerly – Insurance Law HawaiiThe Ninth Circuit affirmed the district court's issuance of the insurer's motion for summary judgment, thereby rejecting the insureds' negligence per se claim for failure to pay benefits. Braun-Salinas v. Am Family Ins. Group, 2016 U.S. App. LEXIS 19555 (9th Cir. Oct. 28, 2016).
The insureds argued that Oregon recognized a negligence per se claim based on an insurer's failure to pay benefits in violation of the statutory standard under state law. Oregon appellate courts, however, only allowed a negligence per se claim only where a negligence claim otherwise existed. The Oregon courts had previously rejected a statutory theory, holding that a violation of the statute did not give rise to a tort action.
Read the court decisionRead the full story...Reprinted courtesy of
Tred R. Eyerly, Insurance Law HawaiiMr. Eyerly may be contacted at
te@hawaiilawyer.com
