Cooperating With Your Insurance Carrier: Is It a Must?
January 02, 2024 —
Susana Arce - Saxe Doernberger & Vita, P.C.A majority of insurance policies require the insured to cooperate with the insurer. The cooperation clause generally states, “the insured agrees to Cooperate with us in the investigation, settlement or defense of the suit.”
The “cooperation clause” is often an afterthought because once litigation has ensued an insured is focused on other important considerations. However, insureds should not forget that complying with the cooperation clause can make the difference between the insurer covering or denying a claim.
The Cooperation Clause in Action
The Court in
HDI Glob. Specialty SE v. PF Holdings, LLC,1 highlighted the importance of cooperating with an insurance carrier. In the underlying litigation, residents of an apartment complex sued four entities, all insured by the same insurance policy: two were named insureds and two were additional insureds. The primary insurer provided a defense for the named insureds.
Read the court decisionRead the full story...Reprinted courtesy of
Susana Arce, Saxe Doernberger & Vita, P.C.Ms. Arce may be contacted at
SArce@sdvlaw.com
9 Basic Strategies for Pursuing Coverage for Construction Accident Claims
September 05, 2022 —
William S. Bennett - Saxe Doernberger & Vita, P.C.Construction accidents happen all the time. Accidents involving worker injuries or damage to property can shut down a job site and cause significant losses. Contractors should be diligent and aggressive in examining all of the available options for recovery under their different insurance policies and bonds. This article will provide a refresher on some basic tips to help policyholders improve claims practices with respect to construction accidents.
1. Identify relevant insurance policies:
Identifying what policies exist that might cover the loss can sometimes be easier said than done. Construction accidents come in many different forms and can involve many different parties who suffer various types of losses. The general contractor, owner, subcontractors, and vendors could all be involved or affected in some way. Each of these parties has its own insurance coverage and will have promised each other various forms of risk transfer through those policies and through their contracts.
Read the court decisionRead the full story...Reprinted courtesy of
William S. Bennett, Saxe Doernberger & Vita, P.C.Mr. Bennett may be contacted at
wsb@sdvlaw.com
10 Safety Tips for General Contractors
October 09, 2018 —
Eric Weisbrot – JW Surety BondsThe construction industry continues to grow each year, paving the way for general contractors to make a profitable, sustainable living when the job is done right. However, to do so effectively, safety standards need to be met with consistency and focus on each worksite. General
contractors who are licensed and bonded must take proactive steps to avoid potentially fatal injuries among their subcontractors and employees, even though this may be easier said than done. To create and maintain a safe worksite each and every time, general contractors should consider how to implement the following best practices and safety tips on the job.
1 – Know the Risks
The most crucial step toward maintaining a safe construction site is to first be aware of the risks involved. Each year, thousands of
construction workers experience injuries on the job, and some ultimately lose their life because of safety missteps at work. As a general contractor, it is your responsibility to know that construction risks run rampant given the nature of the work. Being tuned into the potential for falls, slips, and other common safety-related incidents is a necessary part of operating a safe worksite for you and your employees.
2 – Require Protective Gear
An often overlooked safety precaution on construction sites is the use of up-to-date and well-maintained protective gear. For many subcontractors and employees, it is easy to skip this necessary step in safeguarding themselves from potential safety issues. However, general contractors can take steps to make protective gear a requirement on the job. This may include mandating hardhats and steel-toed shoes, gloves, and eyewear when appropriate. All visitors and workers on a construction site should follow protective gear instructions to avoid unnecessary safety risks.
3 – Educate on Ladder Safety
According to the Bureau of Labor Statistics, ladder injuries account for a significant number of construction worker incidents each year, making up more than 200,000 accidents on average. Ladders have continuously ranked high on OSHA’s list of violations at construction sites because the prevalence of injuries is so high. General contractors can help thwart ladder-related injuries among workers by promoting ladder safety training, including reminders about the right ladder to use for each task. Workers should also be well aware of the importance of inspection before use, and they should always follow the three points of contact rule when going up or down a ladder.
4 – Recognize Equipment Pitfalls
Many construction workers experience injuries relating to equipment used on the job. This could be tied to getting on or off equipment, or loading and unloading materials from machinery. In any case, general contractors can encourage simple tactics to improve equipment safety measures. Paying close attention to secure footing while getting on or off a machine, having more than one person assist with loading and unloading, and ensuring everyone feels comfortable asking for help with these tasks reduces safety risks.
5 – Document Potential Hazards
A general contractor’s main responsibility is to manage the construction site efficiently from start to finish. Part of this duty is recognizing the possible issues on a worksite that may lead to accidents or injuries if not addressed at the beginning of a project. It is necessary to take the time to identify safety risks such as unstable working surfaces, dangerous trenches, or weather-related concerns that may impact the safety of subcontractors, suppliers, or other site visitors. Potential hazards should be documented and shared with site workers, and they should be updated as the project progresses.
6 – Maintain Equipment and Tools
Poorly maintained equipment and tools also cause issues on construction sites. The Infrastructure Health and Safety Association suggests that general contractors
remind workers to inspect tools, machines, handheld equipment, and vehicles before each use to ensure they are properly maintained. Additionally, understanding the maintenance standards for certain tools or equipment and following those guidelines is crucial to reducing injury on the job.
7 – Minimize Crowds
Crowded work areas can be a serious safety issue for general contractors, subcontractors, and vendors and suppliers on site. It is common for crowds to gather during the use of heavy equipment or when a significant task is being completed. However, general contractors should discourage crowd-forming for spectating purposes. This can be done by limiting the number of people allowed to be in an area when certain activities are taking place, and enforcing these rules at every possible opportunity.
8 – Hire Licensed Subcontractors
General contractors may have full- or part-time employees as part of their business model, or there may be a heavy presence of subcontractors not directly tied to the main business. In either case, it is essential to have faith in the capabilities of workers, including their willingness and commitment to follow safety standards. General contractors can help ensure each worker is more likely to take safety seriously when they hire licensed contractors who follow through with
licensing requirements as mandated by the state or city.
9 – Focus on Training
Even after vetting subcontractors and employees based on their licensing status, general contractors also need to ensure training and education are a priority. Several online and in-person courses focus on construction safety training which workers should be encouraged to attend. Safety
education programs from OSHA and other reputable sources are crucial to decreasing accidents on the job.
10 – Be Present
Finally, general contractors can only have an impact on the safety of the job site when they are purposefully present. It is common for some GCs to stop by a project when they are needed or to check on progress periodically. However, new safety hazards, lacking worker training, and other risks are not easily fixed when the general contractor is not consistently on site. Reducing the potential for falls, slips, trips, and fatalities on the job requires communication with workers, and that takes place most effectively when general contractors are in person.
Eric Weisbrot is the Chief Marketing Officer of JW Surety Bonds. With years of experience in the surety industry under several different roles within the company, he is also a contributing author to the surety bond blog.
Read the court decisionRead the full story...Reprinted courtesy of
Crime Policy Insurance Quotes Falsely Represented the Scope of its Coverage
July 13, 2020 —
Brian J Clifford - Saxe Doernberger & VitaAn Indiana businessman found out the hard way how far his insurance company was willing to go to avoid paying a claim after it misrepresented the coverage of a crime policy it sold to him. The quote for the policy indicated that it included coverage for losses resulting from computer hacking. Despite this representation, when the policyholder’s bank accounts were hacked, the insurer denied coverage on the ground that there was no provision for hacking coverage in the policy. Fortunately, the Indiana Court of Appeals recognized the insured’s right to argue before a jury that the insurer’s quotes falsely represented the scope of its coverage.
In Metal Pro Roofing, LLC v. Cincinnati Ins. Co., Richard Cornett, principal of Metal Pro Roofing, LLC and Cornett Restoration, LLC (the “LLCs”), purchased a Cincinnati Insurance Company CinciPlus Crime XC+ Policy (the “Policy”). At the time Mr. Cornett purchased this coverage, and during all subsequent renewals, Cincinnati issued insurance quotes that stated:
Cincinnati can insure your money and securities while at your premises, inside your bank and even off site in the custody of a courier. While you’ve taken precautions to protect your money and securities, you run the risk of loss from employees, robbers, burglars, computer hackers and even physical perils such as fire.
Give yourself peace of mind with Cincinnati’s crime coverage to insure the money and securities you worked so hard to earn.
Crime Expanded Coverage (XC®)Plus Endorsement $125.00.
(Emphasis added.)
Read the court decisionRead the full story...Reprinted courtesy of
Brian J Clifford, Saxe Doernberger & VitaMr. Clifford may be contacted at
bjc@sdvlaw.com
Gordon & Rees Ranked #4 of Top 50 Construction Law Firms in the Nation by Construction Executive Magazine
July 11, 2022 —
GRSM Construction Team - Gordon & Rees Construction Law BlogGordon Rees Scully Mansukhani has been ranked as the No. 4 construction law firm in the nation by Construction Executive in the magazine’s 2022 ranking of The Top 50 Construction Law Firms™. As the only law firm with offices and attorneys in all 50 states, Gordon & Rees’ construction group (with over 150 construction lawyers) delivers maximum value to our clients by understanding their business and combining the resources of a full-service national firm with the local knowledge of a regional firm.
Led by Allen Estes and Angela Richie, the construction lawyers at Gordon & Rees are uniquely situated to serve our construction clients. We have attorneys with professional training and practical experience in related fields such as engineering and construction management, as well as lawyers with leadership experience in various construction industry related trade associations, legal advisory committees and government agencies. “If a client is looking for a legal partner in multiple states who understands their business, Gordon & Rees is that partner,” said Angela Richie.
Read the court decisionRead the full story...Reprinted courtesy of
GRSM Construction Team, Gordon Rees Scully Mansukhani
What to Do Before OSHA Comes Knocking
December 19, 2018 —
Parker Rains - Construction ExecutiveEvery year, the U.S. Occupational Safety and Health Administration (OSHA) inspects workplaces around the country for safety and occupational hazards. In 2017 alone, OSHA conducted 32,408 inspections – more than half of which were unprogrammed inspections.
There are six reasons OSHA might come knocking on the door. They are (in order of priority):
- imminent danger situations;
- severe injuries and illnesses;
- worker complaints;
- referrals;
- targeted inspections; and
- follow-up inspections.
Reprinted courtesy of
Parker Rains, Construction Executive, a publication of Associated Builders and Contractors. All rights reserved.
Read the court decisionRead the full story...Reprinted courtesy of
Mr. Rains may be contacted at
prains@fbbins.com
CGL, Builders Risk Coverage and Exclusions When Construction Defects Cause Property Damage
May 17, 2021 —
Jeffrey Cavignac - Construction ExecutiveDirect damage to property under construction caused by faulty or defective work or defective materials has been a coverage issue for decades. Two specific policies, the Commercial General Liability for the contractors building the structure and the Builders Risk Policy on the project both are sources of potential coverage.
A CGL policy protects the named insured (the contractor in this case) from third party liability arising out of the insured’s operations that results in either bodily injury or property damage. Damage to property caused by poor workmanship or defective materials would qualify as property damage. To understand how the CGL policy might respond to claims such as these, it is necessary to evaluate several exclusions in the CGL policy.
CGL policies cover “property damage,” defined as physical injury to tangible property, including loss of use of such property, and loss of use of tangible property that has not been physically injured.
Reprinted courtesy of
Jeffrey Cavignac, Construction Executive, a publication of Associated Builders and Contractors. All rights reserved.
Read the court decisionRead the full story...Reprinted courtesy of
Skanska Found Negligent for Damages From Breakaway Barges
January 11, 2022 —
Jim Parsons - Engineering News-RecordA federal district court judge in Pensacola, Fla., has ruled that Skanska USA was negligent in preparing the Pensacola Bay Bridge construction site for the approach of Hurricane Sally, a September 2020 event that caused dozens of construction barges to break free of their moorings. The barges severely damaged the partly finished new crossing, closing it for months, and later washed ashore on nearby waterfront properties.
Reprinted courtesy of
Jim Parsons, Engineering News-Record
ENR may be contacted at ENR.com@bnpmedia.com
Read the full story... Read the court decisionRead the full story...Reprinted courtesy of
