Cambridge Massachusetts Building Expert Directory

California Limits Indemnification Obligations of Design Professionals

August 24, 2017 — William L. Doerler - White and Williams LLP
The California legislature recently enacted legislation – SB 496 – limiting a design professional’s indemnification obligations in private contracts related to design services. The term “design professional” refers to licensed architects, landscape architects and professional land surveyors, and registered professional engineers. As revised, Cal. Civ. Code § 2782.8 states that, for all contracts entered into on or after January 1, 2018 for design professional services, all provisions that purport to have the design professional indemnify the indemnitee for claims against the indemnitee – or require the design professional to provide a defense to the indemnitee – are unenforceable except to the extent that the claims against the indemnitee arise out of, or relate to, the negligence, recklessness or willful misconduct of the design professional. In addition, as revised, § 2782.8 limits a design professional’s liability for the cost of defense to the design professional’s percentage of fault. Read the court decision
Read the full story...
Reprinted courtesy of William L. Doerler, White and Williams LLP
Mr. Doerler may be contacted at doerlerw@whiteandwilliams.com

Modern Tools Are Key to Future-Proofing the Construction Industry

September 19, 2022 — Guillaume Le Gouic - Construction Executive
The U.S. construction industry is facing a tech revolution that’s upending the roles of skilled workers. Many traditional contractors are struggling to embrace the new technologies customers increasingly demand, while the industry struggles to attract young professionals. According to the latest American Community Survey data, the median age of a construction worker is 41. This is particularly concerning given the confluence of two trends: the construction industry is facing a critical workforce shortage that’s only expected to intensify, and the workforce is aging—NCCER is predicting around 40% are expected to retire by 2031. Industry leaders must prioritize using the latest industry solutions and innovations to modernize construction work, transform the construction industry and appeal to the next generation of contractors. Throughout COVID-19, the construction sector experienced a higher number of workers quitting jobs as opposed to being laid off, indicating the older workforce likely took the opportunity to retire early, along with more than three million other Americans who did the same. Currently, industry leaders are not doing enough to communicate opportunities to help shift the career perception of electrical contractors from simply being “blue collar” and un-exciting. A 2019 National Association of Home Builders (NAHB) found only 3% of people ages 18 to 25 were interested in pursuing a construction career, with most respondents noting the desire for a less physically demanding job. Reprinted courtesy of Guillaume Le Gouic, Construction Executive, a publication of Associated Builders and Contractors. All rights reserved. Read the court decision
Read the full story...
Reprinted courtesy of

Los Angeles Seeks Speedier Way to Build New Affordable Homes

April 29, 2024 — Patrick Sisson - Bloomberg
Architect Brian Lane calls it “1,000 ways to no.” That’s the wall of red tape that he and his colleagues at the Santa Monica-based firm Koning Eizenberg hit when they propose affordable housing projects around Los Angeles. Regulations and code enforcement lead to delays, which drive up costs, kill projects, and exacerbate Southern California’s stifling housing shortage. But over the last year, builders say that this bureaucratic morass has eased somewhat, thanks to the mayoral order known as Executive Directive 1. Mayor Karen Bass signed ED 1 shortly after taking office in December 2022, at the site of an infamous project that took more than a decade to be approved. The emergency declaration promised to open a new era, directing city departments involved in planning and decision-making to expedite 100% affordable projects, sidestepping codes and regulations that have long added delays and costs. Approvals that might otherwise have taken a year or more are now mandated to happen within a 60-day window, with building permits to be issued within five days. Read the court decision
Read the full story...
Reprinted courtesy of Patrick Sisson, Bloomberg

High School Gym Closed by Construction Defects

October 28, 2011 — CDJ STAFF

The high school gym in Lake Oswego, Oregon has been shut down because testing has revealed that the construction defects have lead to deterioration of the structural integrity of the roof. The school district noted that there was a chance of collapse if there were a “significant seismic event or heavy rain and winds and snow.” The school district has been in a lawsuit with the builders since 2008, which was recently settled for $600,000.

The school board is still determining whether the original contractor will be asked to correct the defect or if they will bid the job out.

Read the full story...

Read the court decision
Read the full story...
Reprinted courtesy of

The Proposed House Green New Deal Resolution

February 27, 2019 — Anthony B. Cavender - Gravel2Gavel
A Resolution has been proposed to the House for consideration that would recognize the Federal Government’s duty “to create a Green New Deal.” It sets forth a very ambitious 10-year program to mobilize and transform every aspect of American life to combat the threats of climate change by transitioning to an economy based upon 100% clean and renewable energy. In doing so, millions of new jobs would be created, and everyone who wants a job would be guaranteed a job. The sponsors’ talking points declare that there is no time to lose, that Americans love a challenge, and “this is our moonshot.” The obvious goal is to eliminate the generation and use of fossil fuel and nuclear energy—they are simply not part of the solution. Read the court decision
Read the full story...
Reprinted courtesy of Anthony B. Cavender, Pillsbury
Mr. Cavender may be contacted at anthony.cavender@pillsburylaw.com

South Carolina “Your Work” Exclusion, “Get To” Costs

July 30, 2014 — Scott Patterson - CD Coverage
In Precision Walls, Inc. v. Liberty Mutual Fire Insurance Co., No. 2013-000787 (S.C. Ct. App. July 23, 2014), SYS was the general contractor for a project. SYS contracted with Precision for the supply and installation of exterior insulation board, to include the taping of all joints. After Precision completed its work, another subcontractor began construction of the brick veneer wall over the insulation board. During construction of the brick wall, some of the joint sealing tape installed by Precision began to come loose. To correct the problem, the existing portion of the brick veneer wall had to be torn down, all of the joint sealing tape removed and replaced, and the brick veneer wall rebuilt. SYS deducted the cost of tearing down and rebuilding the brick veneer wall from Precision’s contract. Precision sought reimbursement for this amount from its CGL policy issued by Liberty Mutual. Read the court decision
Read the full story...
Reprinted courtesy of Scott Patterson, CD Coverage

Substituting Materials and Failure to Comply with Contractual Requirements

November 19, 2021 — David Adelstein - Florida Construction Legal Updates
It is important to remember that if you are going to substitute materials from those specified, you need to make sure there is proper approval in doing so–make sure to comply with the contractual requirements to substitute materials. Otherwise, you could be in a situation where you are contractually required to remove the installed substituted materials and replace with the correct specified materials. This is not the situation you want to find yourself in because this is oftentimes a costly endeavor. This was the situation in Appeal-of-Sauer, Inc., discussed below, on a federal project. The best thing that you can do is comply with the contractual requirements if you want to substitute materials. If you are in the situation where it is too late, i.e., you already installed incorrect materials, you want to demonstrate the substituted materials are functionally equivalent to the specified materials and/or come up with an engineering solution, as required, that could be less costly then ripping out the installed material and replacing with the correct material. Even doing so, however, is not a “get out of jail free card” and does not necessarily mean there is not a strong basis to require you to install the correct specified material. In Appeal of- Sauer, Inc., ASBCA 61847, 2021 WL 4888192 (ASBCA September 29, 2021), a federal project’s engineering requirements required cast iron piping for the above ground sanitary system. However, the prime contractor installed PVC piping instead of cast iron piping. The prime contractor believed it had the appropriate approval through its submittal. The government, through its contracting officer, directed the prime contractor to remove installed PVC piping to replace with cast iron. The government did not believe PVC piping was the functional equivalent of cast iron piping for the above ground sanitary system due to its concern with the noise level of waste materials flowing through the piping. The prime contractor submitted a claim for its removal and replacement costs which was denied by the contracting officer. On appeal with the Armed Services Board of Contract Appeals, the Board agreed with the contracting officer explaining: “While we agree that a design change could be approved by the designer of record and brought to the attention of the government before being incorporated into the design documents, the [prime contractor’s] task order required that such a design change meet the minimum requirements of the solicitation and accepted proposal. The plumbing submittal [the prime contractor] issued here, showing the use of PVC instead of cast iron for the above ground waste piping, did not meet the minimum requirements of the solicitation.” Appeal of-Sauer, Inc., supra. Read the court decision
Read the full story...
Reprinted courtesy of David Adelstein, Kirwin Norris, P.A.
Mr. Adelstein may be contacted at dma@kirwinnorris.com

Construction Warranties: Have You Seen Me Lately?

February 07, 2022 — Christopher D. Cazenave - ConsensusDocs
A construction contract typically contains many different types of warranties. Owners expect contractors to explicitly warrant their workmanship, contractor-provided materials and equipment, and in many instances to assume other warranty risks that may obligate the contractor years after the project is completed. No contractor wants to be surprised years after a project is completed by the existence of warranty obligations that were not considered or negotiated at the outset of the project. To help avoid this situation, warranties should be treated similar to other critical risk-sharing provisions in the contract in concert with other bargained-for provisions, including for example price and schedule. This article provides a brief overview of warranty obligations found in typical construction contracts followed by a few practical considerations for contractors to consider when negotiating warranty obligations. Reprinted courtesy of Christopher D. Cazenave, Jones Walker, LLP (ConsensusDocs) Mr. Cazenave may be contacted at ccazenave@joneswalker.com Read the court decision
Read the full story...
Reprinted courtesy of

CAMBRIDGE MASSACHUSETTS BUILDING EXPERT DIRECTORY AND CAPABILITIES