Fairfield Connecticut Building Expert Directory

Colorado Homes Approved Despite being Too Close Together

January 22, 2014 — Beverley BevenFlorez-CDJ STAFF
ABC 7 reported that more than a dozen homes in Adams County, Colorado were inspected and approved by Building and Safety despite being built too close together. The problem was discovered by an inspector who cited a new home for being “4 inches too close to adjoining property.” Jim Williamette, the Adams County Chief Building Official told ABC 7, “It’s a fire issue for the separation of buildings.” The county may have solved the issue, according to ABC 7. Williamette stated that the properties “will be modified with fire-resistant windows” and combined with the “already-installed fire-resistant siding, the windows will satisfy the international building code.” Currently, the parties are in verbal agreement, and a “signed design proposal” is expected no later than January 21st. Read the court decision
Read the full story...
Reprinted courtesy of

Excess Insurer On The Hook For Cleanup Costs At Seven Industrial Sites

August 28, 2018 — Lorelie S. Masters & Geoffrey B. Fehling - Hunton Insurance Recovery Blog
A New York district court has held that an insurer must provide coverage under three excess insurance policies issued in 1970 for defense and cleanup costs incurred by Olin Corporation in remediating environmental contamination at seven sites in Connecticut, Washington, Maryland, Illinois, New York, and Washington. Seven of the remaining sites at issue presented questions of fact for trial, with only one site being dismissed due to lack of coverage. Reprinted courtesy of Lorelie S. Masters, Hunton Andrews Kurth and Geoffrey B. Fehling, Hunton Andrews Kurth Ms. Masters may be contacted at lmasters@HuntonAK.com Mr. Fehling may be contacted at gfehling@HuntonAK.com Read the court decision
Read the full story...
Reprinted courtesy of

Traub Lieberman Attorneys Lisa M. Rolle and Justyn Verzillo Win Motion for Summary Judgment

December 23, 2024 — Lisa M. Rolle & Justyn Verzillo - Traub Lieberman
In this subrogation action brought in the Supreme Court of the State of New York, Dutchess County, Traub Lieberman attorneys Lisa M. Rolle and Justyn Verzillo successfully obtained dismissal of a third-party complaint against their client, a fire-system protection company. In the underlying case, a fire sprinkler system within a commercial building leaked water into multiple tenant spaces, causing damage. The tenants’ insurers alleged that they each paid several hundred thousand dollars to cover their insureds’ claims. The insurers then filed complaints against the company which originally installed the sprinkler (the “Installer”), asserting that the company breached its duty of care. The Installer commenced a third-party action against the property owner and two fire-system protection companies—including Traub Lieberman’s client—who had separately conducted annual inspections of the sprinkler system over the years. The property owner and the two fire-system protection companies each asserted cross-claims against each other. Reprinted courtesy of Lisa M. Rolle, Traub Lieberman and Justyn Verzillo, Traub Lieberman Ms. Rolle may be contacted at lrolle@tlsslaw.com Mr. Verzillo may be contacted at jverzillo@tlsslaw.com Read the court decision
Read the full story...
Reprinted courtesy of

How Helsinki Airport Uses BIM to Create the Best Customer Experience

September 07, 2017 — Aarni Heiskanen - AEC Business
Helsinki Airport is arguably one of the best in the world. Thanks to its perfect location between Asia and Europe, it’s becoming an ever-more-popular hub. I interviewed Finavia’s Design Manager, Kari Ristolainen, about the airport’s development program and how building information modeling (BIM) is essential to its success. On my way to Finavia’s project office, I walked by the newly opened South Pier. The construction company’s blue site huts were still there, but inside, the terminal seemed fully operational. The South Pier is the latest addition in the development program that started in 2014. Of the 21 airports that Finavia has in Finland, Helsinki is the crown jewel. The €900 million expansion and renovation program will eventually double the airport’s capacity. In 2014, Finavia chose Lemminkäinen as the project management contractor for the terminal expansion. Destia is the partner in the alliance for extending the airport apron. PES Architects continues as the principal designer, while other designers include Sweco Structures, Granlund, and SITO. Read the court decision
Read the full story...
Reprinted courtesy of Aarni Heiskanen, AEC Business
Mr. Heiskanen may be contacted at info@aepartners.fi

Construction Litigation Roundup: “I Never Had a Chance”

May 29, 2023 — Daniel Lund III - Lexology
“I never had a chance.” Such was the plea of a general contractor to a Maryland federal court after having been terminated for failure to perform. “The Agreement provides no express right to cure,” found the court, weighing in on the contractor’s wrongful termination claim. Indeed, the contract was also very clear on termination, allowing for termination for cause on numerous bases, including a common catchall: if the contractor “persistently fails to perform the provisions of this Agreement.” In advance of the actual date of termination, the owner wrote to the contractor, in accordance with the contract: “Notice is also given that seven days from the date of this correspondence, [owner] will exercise its [termination] rights under Section 13.2.2.2 of the Contract." The communication from the owner contained no discussion of allowing the contractor an opportunity to cure its alleged default. Read the court decision
Read the full story...
Reprinted courtesy of Daniel Lund III, Phelps
Mr. Lund may be contacted at daniel.lund@phelps.com

California Trial Court Clarifies Application of SB800 Roofing Standards and Expert’s Opinions

February 18, 2020 — Scott Calkins & Anthony Gaeta - Collinsworth, Specht, Calkins & Giampaoli; Mark Chapman - Bert L. Howe & Associates, Inc.
Collinsworth, Specht, Calkins & Giampaoli partners Scott Calkins and Anthony Gaeta obtained a trial victory when the jury returned a 12-0 defense verdict against one plaintiff homeowner, and awarded the other homeowner less than $2,000, an amount well below the defendant’s pre-trial CCP 998 Offers to Compromise. One of the main issues in the case was the application of SB800 roofing standards. Plaintiffs’ roofing expert testified in deposition no water entered the structure or passed through a moisture barrier [Civ. Code §896(a)(4)], and no materials had fallen off the roof [§896(g)(11)]. In an attempt to circumvent the applicable performance standards, Plaintiffs argued Civ. Code §869(g)(3)(A), also known as the ‘useful life’ exception, applied because the various components of the roof (nailing pattern, tiles, vents, etc.) were installed in such a manner so as to reduce the useful life of the roof. Following pre-trial motions and objections made during Plaintiffs’ direct examination, the Court ruled Section 896(g)(3)(A) did not apply to a conventional roof, as it is not a “manufactured product” as defined in §896(g)(3)(C). Plaintiffs’ roofing claims were summarily dismissed and Plaintiffs’ expert was prevented from testifying. In contrast, the defense expert, Mark Chapman, was allowed to testify regarding his expert opinions as to the appropriate SB800 standard relative to each alleged defect and whether the standards were violated. The SB800 performance standards were included on the jury verdict form, and the jury found Mr. Chapman’s testimony compelling, which was a substantial factor in awarding only minor damages to one Plaintiff. For more information, contact Scott Calkins (scalkins@cslawoffices.com), Anthony Gaeta (ageta@cslawoffices.com) or Mark Chapman (mchapman@berthowe.com). Read the court decision
Read the full story...
Reprinted courtesy of

California Contractors – You Should Know That Section 7141.5 May Be Your Golden Ticket

February 18, 2020 — Amy L. Pierce, Mark A. Oertel & John Lubitz - Lewis Brisbois Bisgaard & Smith LLP
Under California’s Contractors’ State License Law, Cal. Bus. & Prof. Code §§ 7000 et seq., all contractors’ and subcontractors’ licenses expire two years from the last day of the month in which the license issued, or two years from the date on which the renewed license last expired. The Contractors State License Board (CSLB) sends licensees a renewal application 60 to 90 days prior to the date the license is set to expire. Most contractors have various controls in place to make sure that the renewal application is timely filed and the required fee paid. Even so, we are only human and mistakes are made, and a renewal application filing deadline can be missed for a variety of reasons, e.g., the licensee’s mailing address has not been updated on the CSLB’s records, the individual responsible for filing the license renewal is out on leave, there has been a death in the family or a serious health issue, etc. Quoting Robert Burns, even “[t]he best-laid schemes of mice and men go oft awry” (To a Mouse, 1786). General contractors should be cognizant of both their and their subcontractors’ license renewal obligations and deadlines. If a licensee missed timely filing its renewal application, Business & Professions Code Section 7141.5may provide some relief. Section 7141.5 provides that the Registrar of Contractors,

“may grant the retroactive renewal of a license if the licensee requests the retroactive renewal in a petition to the registrar, files an application for renewal on a form prescribed by the registrar, and pays the appropriate renewal fee and delinquency fee prescribed by this chapter. This section shall only apply for a period not to exceed 90 days from the due date and only upon a showing by the contractor that the failure to renew was due to circumstances beyond the control of the licensee.”

Reprinted courtesy of Lewis Brisbois Bisgaard & Smith LLP attorneys Amy Pierce, Mark Oertel and John Lubitz Ms. Pierce may be contacted at Amy.Pierce@lewisbrisbois.com Mr. Oertel may be contacted at Mark.Oertel@lewisbrisbois.com Mr. Lubitz may be contacted at John.Lubitz@lewisbrisbois.com Read the court decision
Read the full story...
Reprinted courtesy of

How the Pandemic Pushed the Construction Industry Five Years Into the Future

September 06, 2021 — Alexandra McManus & Hussein Cholkamy - Construction Executive
On any given day, there are a multitude of variables playing out on construction jobsites, from maintaining daily logs to track hundreds of workers to creating daily schedules to keep projects on track. What made an industry that’s arguably about 20 years in the past get a dramatic technology boost five years into the future? A global pandemic that nobody saw coming. When COVID-19 made its first appearance on construction sites in early 2020, the domino effect of project shutdowns and labor shortages created uncertainty along with budget and timeline nightmares. The pandemic shook up the industry, with many projects coming to a screeching halt. As general contractors scrambled to keep their projects moving and workers safe, technology proved to be the solution. With jobsites shutting down, coupled with a nationwide labor shortage, real-time visibility over workforce variables, such as who was on-site, where they were and who they interacted with was more important than ever. Safe proximity tracking, virtual density and access control technologies helped construction companies gain more control, visibility and the ability to deal with the ever-changing regulations due to the global pandemic. More importantly, it helped keep their valuable workforce safe. Reprinted courtesy of Alexandra McManus & Hussein Cholkamy, Construction Executive, a publication of Associated Builders and Contractors. All rights reserved. Mr. Cholkamy may be contacted at hussein@eyrus.com Ms. McManus may be contacted at alex@eyrus.com Read the court decision
Read the full story...
Reprinted courtesy of

FAIRFIELD CONNECTICUT BUILDING EXPERT DIRECTORY AND CAPABILITIES