Cambridge Massachusetts Building Expert Directory

Drone Use On Construction Projects

June 05, 2023 — Brent N. Mackay - ConsensusDocs
The use of drones, or small unmanned aircraft systems (“UAS”), has become common throughout the construction industry in all phases of construction, including pre-construction, progress of the work, project closeout, and maintenance. This article examines the federal regulations related to drone use, as well as considerations for construction professionals related to state and local laws, project location, and weather issues. Federal Regulations Regardless of the state in which the project is located, companies and persons operating commercial drones must observe regulations promulgated by the Federal Aviation Administration (“FAA”), which has the exclusive authority to regulate aviation safety, airspace navigation, and air traffic control. Reprinted courtesy of Brent N. Mackay, Watt, Tieder, Hoffar, & Fitzgerald, LLP (ConsensusDocs) Mr. Mackay may be contacted at bmackay@watttieder.com Read the court decision
Read the full story...
Reprinted courtesy of

‘Revamp the Camps’ Cabins Displayed at the CA State Fair

July 30, 2014 — Beverley BevenFlorez-CDJ STAFF
This year, the California State Fair is displaying “four modern, environmentally friendly cabins” as “part of the ‘revamp the camps’ mission by the Forward Parks Commission, California State Parks and 12 architecture graduate students at Cal Poly Pomona,” according to the Sacramento Bee. The commission’s purpose is “to find solutions for the financial, cultural and population changes affecting state parks” including “drawing millennials and urban residents who live far from traditional state parks.” Guidelines stated that the cabins “had to be portable, accessible to the physically disabled and made from sustainable materials.” Furthermore the cabins had to be under $15,000 each, have no running water or electricity, and “[y]et the design had to appeal to a younger market.” “After a review of the surveys and recommendations from the Parks Forward Commission, the hope is to place the prototypes in state parks for public use,” the Sacramento Bee reported. Read the court decision
Read the full story...
Reprinted courtesy of

Sochi Construction Unlikely to be Completed by End of Olympic Games

February 11, 2014 — Beverley BevenFlorez-CDJ STAFF
As journalists and visitors descended upon Sochi, Russia for this winter’s Olympic Games, they reported “used linen, improper toilets, poor wiring, unclean water and loose fixtures” using the Twitter hash tag @SochiProblems, according to The International Business Times. Furthermore, it is doubtful that the construction work “in and around Sochi” will be completed by February 23rd—the official end of the games. The International Business Times article features photographs of various unfinished construction sites including an apartment building, hotels, a sports store, and other buildings. The Olympic opening ceremony took place on February 7th. Read the court decision
Read the full story...
Reprinted courtesy of

Does a Contractor (or Subcontractor) Have to Complete its Work to File a Mechanics Lien

January 10, 2018 — Wally Zimolong - Zimolong LLC
Yes. There seems to be common misconception that a contractor, subcontractor, or supplier, has six months from its last day of work on the project to file a mechanics lien. I frequently see mechanics liens whereby the claimant states “Claimants last day of work on the project was X.” However, Section 1502 (49 P.S. Section 1502) of the Pennsylvania Mechanics Lien is clear that a lien must be filed within six month of “the completion of his work.” Under the Lien Law, “completion of the work” is a defined term and means “means performance of the last of the labor or delivery of the last of the materials required by the terms of the claimant’s contract or agreement, whichever last occurs.” Read the court decision
Read the full story...
Reprinted courtesy of Wally Zimolong, Zimolong LLC
Mr. Zimolong may be contacted at wally@zimolonglaw.com

Contractors’ Right to Sue in Washington Requires Registration

July 03, 2022 — John Leary - Gordon & Rees Construction Law Blog
Summary: In Washington, contractors must be properly registered in order to pursue a legal action against a customer for breach of contract. Dobson v. Archibald, a February 2022 decision by the Washington Court of Appeals, reinforced how the governing statute – RCW 18.27.080 – does not simply create an affirmative defense but establishes a mandatory pleading prerequisite.1 Discussion: In 2018, Archibald hired Dobson to refinish his hardwood floors for $3,200. Dobson was not a registered contractor. She had been referred to Archibald by acquaintances who were familiar with her construction and home repair work, including improvements Dobson had made to her own home. Archibald paid Dobson a $700 deposit before Dobson began her work. At the completion of the floor repair project, Archibald was unhappy with the appearance of the floors and informed Dobson that he would not pay the remaining $2,500. Read the court decision
Read the full story...
Reprinted courtesy of John Leary, Gordon & Rees
Mr. Leary may be contacted at jleary@grsm.com

Colorado Supreme Court Rules that Developers Retain Perpetual Control over Construction Defect Covenants

June 21, 2017 — Jesse Witt - The Witt Law Firm
The Colorado Supreme Court ruled today that developers can retain control over community covenants in perpetuity by recording a covenant that requires declarant consent to any amendments. Although the Colorado Common Interest Ownership Act (CCIOA) states that such controls should be void, the court nevertheless ruled that a declarant may veto amendments that alter the dispute resolution procedures for construction defect actions at any time. The case of Vallagio at Inverness Residential Condominium Ass’n v. Metropolitan Homes, Inc., __ P.3d __, 15CO508, arose when the community’s members discovered widespread construction defects. When the declarant developed the project, it had recorded a declaration of covenants that purported to waive the homeowners’ right to a jury trial and instead require that any construction defect disputes be resolved by a private arbitration panel. The declaration also prohibited the homeowners from recovering attorney fees and costs, and it limited the declarant’s liability for damages. Consistent with CCIOA, the declaration allowed the homeowners to amend their covenants by a 67% vote, but it recited that the declarant could veto any such amendment prior to the sale of the last unit to a homeowner. The covenants further stated that the declarant must consent to any amendment that altered the construction defect restrictions. Reprinted courtesy of Jesse Howard Witt, Acerbic Witt Mr. Witt may be contacted at www.witt.law Read the full story... Read the court decision
Read the full story...
Reprinted courtesy of

Don’t Let Construction Problems Become Construction Disputes (guest post)

October 01, 2014 — Melissa Dewey Brumback – Construction Law in North Carolina
To start our week off right, today we have another important article from guest blogger Christopher G. Hill, LEED AP. Chris is a Virginia Supreme Court certified mediator, construction lawyer and owner of the Richmond, VA firm, The Law Office of Christopher G. Hill, PC. He authors the Construction Law Musings blog where he discusses legal and policy issues relevant to construction professionals. His practice concentrates on mechanic’s liens, contract review and consulting, occupational safety issues (VOSH and OSHA), and risk management for construction professionals. [His blog was also one of the first construction law blogs I found and followed, even if he is a Duke alum!] Take it away, Chris! First and foremost, thanks to Melissa for inviting me back to post here at her great blog. She continues to invite me back despite my being a Blue Devil (and I try not to hold her Tar Heel status against her). So much of discussion relating to construction law and construction lawyers centers on the litigation of disputes. This discussion comes in many forms from avoidance of such litigation through the early intervention of good counsel prior to getting into a project to what sort of resolution mechanism to use. Another branch of this discussion is essentially the right way to pursue your claim (or as some may read it start the dispute ball rolling). Sometimes a payment bond claim is the best method while others a straight up contractual suit is the best way to go. Of course, all of this discussion presumes that there will be disputes. While I agree to some degree that in the Murphy’s Law riddled world of commercial construction, problems will arise. These problems need not rise to the level of a dispute that requires outside (read court or arbitrator) intervention. A few tips that are easy to write, but admittedly hard to practice at times can hopefully keep problems from blossoming into disputes. I’ve listed three big ones here: 1.Use “in house counsel.” Yes, I know that most of you engineers, architects, commercial general contractors and subcontractors out there aren’t big enough to either want or need a full time attorney on the payroll. What I mean by this is that when problems occur (or preferably before doing so), give your friendly local construction lawyer a call. As I learned from my dad, an ounce of prevention and all that. That 10 minute phone call may help avoid many hours of time and bills from your attorney later down the road. Read the court decision
Read the full story...
Reprinted courtesy of Melissa Dewey Brumback, Construction Law in North Carolina
Ms. Brumback may be contacted at mbrumback@rl-law.com

Paycheck Protection Program Forgiveness Requirements Adjusted

June 29, 2020 — Jacob W. Scott - Smith Currie
On June 5, 2020, the President signed into law the Paycheck Protection Program Flexibility Act of 2020, amending portions of the Paycheck Protection Program (“PPP”). Most importantly, the PPP Flexibility Act adjusted the forgiveness requirements for PPP loans. The CARES Act allowed borrowers to apply for forgiveness of loan amounts used for payroll and other covered costs during an eight-week period beginning on the date of origination, or by June 30, 2020, whichever came first. The CARES Act also allowed borrowers to use the loan funds by June 30 to restore employee and payroll levels that had been reduced as a result of COVID-19. The Small Business Administration instructed borrowers that at least 75% of the loan funds had to be used to cover payroll costs during the covered period to be eligible for forgiveness. Read the court decision
Read the full story...
Reprinted courtesy of Jacob W. Scott, Smith Currie
Mr. Scott may be contacted at jwscott@smithcurrie.com

CAMBRIDGE MASSACHUSETTS BUILDING EXPERT DIRECTORY AND CAPABILITIES