Seattle Washington Building Expert Directory

Traub Lieberman Attorneys Named 2019 Super Lawyers

November 04, 2019 — Traub Lieberman
Related Attorneys: Jonathan R. Harwood, Michael K. Kiernan, Michael S. Knippen, Meryl R. Lieberman, Christopher Russo, Scot E. Samis, Lisa L. Shrewsberry, Stephen D. Straus, Richard K. Traub, Cheryl P. Vollweiler, Brian C. Bassett, Jessica N. Kull, Jeremy S. Macklin, Dana A. Rice, Burks A. Smith, III, Jason Taylor Ten Traub Lieberman attorneys have been named 2019 Super Lawyers and seven named 2019 Rising Stars. The honored attorneys represent five of the firm's seven offices and nearly all of its service areas. Super Lawyers, a Thomson Reuters business, is a rating service of outstanding lawyers from more than 70 practice areas, who have attained a high degree of peer recognition and professional achievement. The annual selections are made using a patented multiphase process that includes a statewide survey of lawyers, an independent research evaluation of candidates and peer reviews by practice area. Read the court decision
Read the full story...
Reprinted courtesy of

Indemnity Clauses—What do they mean, and what should you be looking for?

May 07, 2015 — Craig Martin – Construction Contractor Advisor
It seems that every construction contract now-a-days, contains an indemnity clause. Contractors should be reviewing these indemnity clauses very carefully to understand the potential scope of an indemnity obligation and your opportunity to negotiate changes. What is an indemnity Clause? An indemnity clause transfers risk from one party to another. When a contractor signs an indemnity agreement, it is agreeing to pay for damages for which another party could be liable. Read the court decision
Read the full story...
Reprinted courtesy of Craig Martin, Lamson, Dugan and Murray, LLP
Mr. Martin may be contacted at cmartin@ldmlaw.com

Notice of Claim Sufficient to Invoke Coverage

August 06, 2014 — Tred R. Eyerly – Insurance Law Hawaii
Indirect notice to the insurer was sufficient to trigger coverage for the additional insured under a liability policy. Spoleta Constr., LLC v. Aspen Ins. UK Ltd., 2014 N.Y. App. Div. LEXIS 5174 (N.Y. App. Div. July 11, 2014). An employee of the subcontractor was injured at the construction project on October 20, 2008. The general contractor was named as an additional insured on the subcontractor's CGL policy with Aspen. Under the subcontract, the subcontractor also agreed to defend and indemnify the general contractor for all claims arising out of the subcontractor's work. The general contractor did not receive notice of the accident until late December 2009 in a letter from the injured employee's attorney. On January 27, 2010, the general contractor's liability carrier sent a letter to the subcontractor giving notice of the employee's claim and requesting that the subcontractor put its carrier on notice. On February 9, 2010, the subcontractor sent to Aspen a claim form with the January 2010 letter attached. Read the court decision
Read the full story...
Reprinted courtesy of Tred R. Eyerly, Insurance Law Hawaii
Mr. Eyerly may be contacted at te@hawaiilawyer.com

Designing a Fair Standard of Care in Design Agreements

February 21, 2022 — ConsensusDocs
One of the concerns faced by construction companies is now design liability. Design liability concerns are not limited to just design-build projects. It is a hot-button issue for builders because the line between an architect’s responsibility to create sufficient design documents and a builder’s responsibility to execute the means, methods, and techniques is increasingly blurry. Problems arise when owners, design professionals, and builders point fingers, rather than truly collaborate, and communicate. While construction technologies used to assemble complex systems within buildings are increasingly sophisticated, such sophistication is unfortunately not matched with increased information sharing and effective communication. Another reason for growing design liability is unclear and inadequate specifications. Too often projects rush as well as shortchange design budgets. And some projects use hybrid prescriptive and performance specifications. This hybrid approach often confuses and obfuscates rather than clarifies design requirements. Read the court decision
Read the full story...
Reprinted courtesy of ConsensusDocs

How Technology Reduces the Risk of Façade Defects

March 20, 2023 — Ori Aphek - Construction Executive
The shell of the building is an onlooker’s first impression and crafts the architectural aesthetic, but it also plays a crucial role in enabling energy efficiency and protecting against the elements. Because façades are in direct contact with the elements, issues with water intrusion are the most common problem and the costliest to remedy, with anywhere from 30% to 70% of lawsuits related to water intrusion, half of it through the façade. Additionally, improperly installed façades pose significant safety risks because unsecured parts can fall and hit people below. All these factors contribute to the façade being one of the most complex and costly aspects of a building to construct and inspect, making up 205 of the total project cost. Installing these systems correctly the first time is the most effective way to mitigate these threats. Teams should utilize data-informed technology that ensures plan adherence, reducing risk and avoiding errors during installation. The Challenges of Façade Installation Façade installation and subsequent inspection are inherently challenging, particularly for high-rise buildings. When performing post-installation verification manually, inspectors must review every element, joint by joint, window by window, stone by stone and brick by brick, which can take months to complete. Inspections of the entire building system are limited by this process, as inspectors can only access one portion of the building façade at a time and often have to inspect from indoors, on balconies or at the ground level, which doesn’t paint a complete picture. As a result, teams typically only perform spot checks on the façade and are rarely inspected to their fullest. This leaves many installation errors and defects, which serve as ticking bombs for future water intrusion or safety hazards. Reprinted courtesy of Ori Aphek, Construction Executive, a publication of Associated Builders and Contractors. All rights reserved. Read the court decision
Read the full story...
Reprinted courtesy of

Insurers May Not Be Required to Defend Contractors In a Florida §558 Proceeding

November 06, 2018 — Erik Simpson - Gordon & Rees Construction Law Blog
In recent holding, the Florida Supreme Court held that an insurer may not have a duty to defend a contractor in a Florida §558 proceeding. Chapter 558 of the Florida Statutes sets forth procedural requirements which must be met before a claimant may file a construction defect action. These requirements include serving a contractor, subcontractor or supplier with written notice of the claim. The contractor, in turn, must serve a written response to the notice of claim in which the contractor provides either an offer to repair the alleged construction defect at no cost to the claimant, resolution of the claim through a monetary payment, a statement disputing the claim, or a statement that any monetary payment will be determined by the recipient’s insurer. The claimant may file suit if the contractor disputes the claim and refuses to remedy the alleged defect or provide monetary compensation. Read the court decision
Read the full story...
Reprinted courtesy of Erik Simpson, Gordon & Rees
Mr. Simpson may be contacted at esimpson@grsm.com

3D Printing Innovations Enhance Building Safety

October 07, 2019 — Mahmut Ekenel & Melissa Sanchez - Construction Executive
The mention of 3D printing alone is enough to get people excited, often conjuring images of a desktop console that can download and create three dimensional objects such as prototypes, or mechanical parts. And yet, in recent years the technology has given way to a slight impatience, as people begin to wonder how and when it will have a direct impact on both their lifestyles and their businesses. The construction industry has been quick to take advantage of these innovations, and the effects are tangible, especially regarding building safety. The 3D construction technology allows for several key advantages in terms of faster construction times, uncompromised quality of construction and lower costs—allowing for affordable dwellings to be quickly built for people in need. These advantages also lead to safety improvements during the building process. The ability to accelerate construction time without requiring an increase in labor results in a fewer construction-related workplace injuries and a reduction in material waste, making it an environmentally friendly construction method as well. ICC-Evaluation Service (ICC-ES), a subsidiary of the International Code Council (ICC) which develops model codes and standards (i.e. International Building Code, International Residential Code) and delivers a wide array of building safety services, has taken the lead on developing acceptance criteria to address building code compliance of 3D printed construction. Currently, 3D construction technology is not within the provisions of the International Building Code (IBC) or International Residential Code (IRC). The acceptance criteria introduces new compliance measures for interior and exterior 3D printed concrete walls (with and without structural steel reinforcement), load-bearing and non-load-bearing walls, and shear walls in one-story, single-unit, residential dwellings. The 3D walls are constructed by printing two outer layers of 3D concrete and then filling the core with 3D concrete to form a solid wall. Reprinted courtesy of Mahmut Ekenel & Melissa Sanchez, Construction Executive, a publication of Associated Builders and Contractors. All rights reserved. Mr. Ekenel may be contacted at mekenel@icc-es.org Ms. Sanchez may be contacted at msanchez@icc-es.org Read the court decision
Read the full story...
Reprinted courtesy of

NYPD Investigating Two White Flags on Brooklyn Bridge

July 23, 2014 — Chris Dolmetsch – Bloomberg
The New York City Police Department is trying to figure out who replaced the American flags that fly atop the Brooklyn Bridge with white banners. The replacement flags were discovered this morning on the towers at opposite ends of the bridge, where the Stars and Stripes are normally displayed, and were removed, police said. The NYPD’s Counterterrorism Bureau and Emergency Service Unit are probing the incident and reviewing surveillance video to determine who replaced the flags and when the act took place, police said. Read the court decision
Read the full story...
Reprinted courtesy of Chris Dolmetsch, Bloomberg
Mr. Dolmetsch may be contacted at cdolmetsch@bloomberg.net

SEATTLE WASHINGTON BUILDING EXPERT DIRECTORY AND CAPABILITIES