Flexible Seattle Off-Ramp Would Retain Shape in Quake
November 23, 2016 —
Tim Newcomb – Engineering News-RecordMoving from the lab to the field, a highway off-ramp bridge under construction in Seattle features memory-retaining metal rods and bendable concrete designed to provide the structure with flexibility sufficient to withstand a major seismic event.
Read the court decisionRead the full story...Reprinted courtesy of
Tim Newcomb, Engineering News-RecordEngineering News-Record may be contacted at
ENR.com@bnpmedia.com
Alabama Still “An Outlier” on Construction Defects
October 14, 2013 —
CDJ STAFFWhile many state Supreme Courts have determined that faulty construction work can be an occurrence under a standard commercial liability policy, the Alabama Supreme Court has taken the contrary view. Writing on the Kilpatrick Townsend blog, Carl A. Salisbury and Edmund M. Kneisel point out that the decision makes Alabama “an outlier,” and they ask, “how much longer will the outliers hold out?”
They note that in the underlying construction defect case, “the arbitrator awarded $3 million in compensatory damages to the homeowners because of improperly installed flashing; improperly installed brick; the lack of weep holes in the brick; improperly installed doors and windows; improper construction of the upper porches; faulty construction of the roof; improper installation of a bathtub.” They summarize: “the house must have leaked like a colander.”
When the insurer denied coverage, the contractor sued. The insurer argued that “the CGL policy form does not cover construction-related acts or omissions because such acts are not an insured ‘occurrence.’” Mr. Salisbury and Mr. Kneisel point out that “the Alabama Supreme Court agreed.”
The problem they see is that “if there is no insurance for any intentional act, then insurance is simply a rip-off — it covers nothing.” They quote Justice Benjamin Cardozo to this effect: “To restrict insurance to cases where liability is incurred without fault of the insured would reduce indemnity to a shadow.” Their argument is that the Alabama decision was not the “correct position,” as exemplified by recent decisions from West Virginia, North Dakota, Connecticut and Georgia. The case “was a prime opportunity for the Alabama Supreme Court to leave the ranks of the outliers and join the majority view.”
Read the court decisionRead the full story...Reprinted courtesy of
Are COVID-19 Claims Covered by Builders Risk Insurance Policies?
May 04, 2020 —
Jason M. Adams, Gibbs Giden Locher Turner Senet & Wittbrodt LLP and Cheryl L. Kozdrey, Saxe Doernberger & Vita, P.C.If you are an attorney, insurance broker, or other professional representing developers and contractors, then your clients have likely reached out with concerns about losses related to COVID-19. One common question is whether there is potential coverage under builders risk insurance policies.
The short answer is: It depends. As with most questions pertaining to insurance coverage, the answers depend on the specific policy language and underlying facts required to trigger coverage. Builders risk policies are even more fact specific due to the lack of uniformity of base policy forms and endorsements between insurance carriers.
The first step in any analysis is to gather facts and carefully document any impending and potential damages or delays. The facts are crucial because the coverage analysis may vary depending on the specific reason the project was shut down. For example, the analysis would be different if the project was shut down as a result of an express government order, such as those in Northern California and Washington, versus the project shutting down as a result of workers testing positive for COVID-19. Properly analyzing builders risk coverage involves a granular account of the facts and damages, and can require a great deal of hair splitting with respect to specific policy language.
Regardless of the strength of the insured’s facts and damages, or the breadth of its policy language, the policyholder still likely faces an uphill battle in finding coverage for COVID-19 related claims. The unfortunate reality of most builders risk policies is that they are property policies that require some evidence of physical loss or damage to trigger coverage. Whether or not COVID-19 claims constitute property damage will be the subject of great debate and litigation over the coming months and years. The outcome will likely depend on how the insured’s jurisdiction ultimately rules on the litany of COVID-19 cases that have already been filed – specifically, how broadly each court interprets the meaning of “physical loss or damage.”
Although these key issues have yet to be clearly defined by the courts, some policies are better than others and there are specific variables that could affect the likelihood of coverage. For example, some of the more policyholder-friendly insurance programs may contain coverage extensions for delay in completion, business interruption, loss of rental income, or civil authority that may not be tied to the property damage requirement, and which would tend to support coverage for COVID-19 claims.
Even if the insured crosses the initial threshold and can demonstrate a covered claim, the following common endorsements and exclusions may require additional analysis depending on the facts.
- Virus or Pandemic Exclusions: Virus or pandemic exclusions are not as common on builders risk policies as they may be on other forms of coverage. However, they do exist and, if present, result in a significant barrier to coverage. As with the policy itself, every endorsement is different and should be analyzed in terms of the express language contained in the endorsement and the facts.
- Abandonment or Cessation of Work: Most builders risk policies include provisions that preclude coverage in the event of the abandonment of the project or a lengthy cessation of work. As a result, the insured should take steps to articulate to the carrier that the project has not been abandoned, and that there exists an intent to return as soon as possible. The insured should also maintain a record of ongoing project oversight and protection efforts taken during the period when construction operations are suspended.
- Security and Safety Requirements: Many builders risk policies contain provisions requiring the insured to maintain protective safeguards and security protocols throughout the pendency of the project. Safety fencing, lighting and security guards are common examples. The policy should be analyzed to ensure that the policyholder can meet any such requirements during a COVID-19 related shutdown. For example, can the insured continue to staff a security guard? If not, arrangements will likely need to be made with the carrier depending on the language of the policy.
- Insurable Limits: Builders risk policies are typically underwritten based upon the total completed value of the structure, including materials and labor. The insured will need to analyze the policy to consider whether increased material or labor costs as a result of COVID-19 will alter the terms of coverage, trigger any escalation clauses, or result in an increase in premium due. If increased cost projections become apparent, the insured should report these changes to the carrier immediately.
- Extensions of Coverage: The insurance industry was facing a hard market even before the COVID-19 pandemic, which resulted in higher premiums and limited coverage options. The COVID-19 pandemic has only exacerbated these issues and it may be difficult to obtain coverage extensions on projects that have been shut down. The insured should work with its risk management team (risk manager, insurance broker and lawyer) to engage the carriers to negotiate any necessary coverage extensions resulting from COVID-19 related project delays.
To summarize, builders risk coverage for COVID-19 claims is far from certain, but not impossible. Insureds should provide notice of a claim to all potentially applicable carriers in order to preserve their rights. The insured should also report increased construction cost and articulate its intent to return to the project to preserve their escalation clause and avoid arguments that they have abandoned the project. The insured should continue to document its claims and damages, and be ready to substantiate its claims and push back on any coverage denial. Throughout the entirety of this process, the insured should work with its risk management team to get out in front of any extensions it may need to complete the project. In a climate where insurance carriers are receiving an insurmountable number of claims, the insured should be prepared to fight for coverage and not simply throw up its hands in the face of a denial. Given the intense social, legislative and executive pressure to cover COVID-19 claims, there may be a tendency for the courts to find coverage in gray areas, particularly if the insured was fortunate enough to have purchased one of the broader coverage forms referenced above.
About the Authors
Jason M. Adams, Esq. (jadams@gibbsgiden.com) is a partner at Gibbs Giden representing construction professionals in the areas of Construction Law, Insurance Law and Risk Management and Business/Civil Litigation. Adams is also a licensed property and casualty insurance broker and certified Construction Risk & Insurance Specialist (CRIS). Jason represents developers, contractors, public entities, investors, lenders, REITs, design professionals, and other construction professionals at all stages of the construction process. Jason is a published author and sought-after speaker at seminars across the country regarding high level construction risk management and insurance topics. Gibbs Giden is nationally and locally recognized by U. S. News and Best Lawyers as among the “Best Law Firms” in both Construction Law and Construction Litigation. Chambers USA Directory of Leading Lawyers has consistently recognized Gibbs Giden as among California’s elite construction law firms.
Cheryl L. Kozdrey, Esq. (clk@sdvlaw.com) is an associate at Saxe Doernberger & Vita, P.C., a national insurance coverage law firm dedicated exclusively to policyholder representation and advocacy. Cheryl advises insurance brokers, risk managers, and construction industry professionals regarding optimal risk transfer strategies and insurance solutions, including key considerations for Builder’s Risk, Commercial General Liability, D&O, and Commercial Property policies. She assists clients with initial policy reviews, as well as renewals and modification(s) of existing policies to ensure coverage needs are satisfied. Cheryl also represents policyholders throughout the claims process, and in coverage dispute litigation against insurance carriers. She is currently working on some of the largest construction defect cases in the country. Cheryl is a published author and is admitted to practice in the State of California and all federal district courts within the State.
Read the court decisionRead the full story...Reprinted courtesy of
How to Protect a Construction-Related Invention
May 10, 2021 —
Patrick Barthet - Construction ExecutiveThey say necessity is mother of invention. That was surely true for Johan Vaaler, who in 1899 decided he was tired of having to sew pages together to keep them organized. Voila, enter the paper clip. This wasn’t the case for Percy Spencer. He was a radar tube designer working at Raytheon who, while working in front of an active radar set, noticed the candy bar in his pocket started to melt. Exploring the phenomenon further, he placed corn kernels in front of the radar and behold, he ended up with the world’s first microwaved popcorn. He patented the microwave oven in 1945.
Whether by necessity or by accident, what should contractors do if they develop a unique tool to accomplish some portion of their work faster, easier or less expensively? How do they protect it from misappropriation by competitors, or by an errant employee? We are all familiar with the fact that in today’s internet-driven market, it has become very easy to reverse engineer and knock off an innovative product.
The best way to safeguard an invention is, of course, to register it with the appropriate government agency:the United States Patent and Trademark Office (USPTO). Generally done with the assistance of a patent lawyer, the process is neither inexpensive or abbreviated. It could cost several thousand dollars and take 12 to 18 months. But, more importantly, this is not sufficient. Inventors must regularly monitor their patents to police possible infringers. Many folks think the USPTO does this, but it does not.
Reprinted courtesy of
Patrick Barthet, Construction Executive, a publication of Associated Builders and Contractors. All rights reserved.
Read the court decisionRead the full story...Reprinted courtesy of
Mr. Barthet may be contacted at
pbarthet@barthet.com
Construction Defect Claim Must Be Defended Under Florida Law
February 15, 2018 —
Tred R. Eyerly – Insurance Law HawaiiThe Eleventh Circuit found that the insured caused property damage to areas beyond its own work, obligating the insurer to defend. Addison Ins. Co. v. 4000 Island Blvd. Condo. Ass'n, 2017 U.S. App. LEXIS 26870 (11th Cir. Dec. 28, 2017).
The condominium association contracted with Poma Construction Corp. to replace the building's aging concrete balcony railings with new aluminum and glass railings. Poma subcontracted with Windsor Metal Specialties, Inc. to paint the new railings. Work was completed on February 24, 2012. Poma issued a 10-year warranty covering its installation of the railings. Windsor issued a 20-year limited warranty covering the paint job.
Read the court decisionRead the full story...Reprinted courtesy of
Tred R. Eyerly, Insurance Law HawaiiMr. Eyerly may be contacted at
te@hawaiilawyer.com
Address 'Your Work' Exposure Within CPrL Policies With Faulty Workmanship Coverage
December 29, 2020 —
Joseph Reynolds - Construction ExecutiveNew faulty workmanship coverage forms have emerged to potentially address the “your work” exposure found in most contractors professional liability (CPrL) policies. Once offered by only a single carrier, several insurers have recently entered the marketplace to cover the cost to repair or replace faulty work or the related material costs associated with the “self-performed work” of general and trade contractors.
Commonly serving as a separate insuring agreement and offered in carrier-specific CPrL policies, faulty workmanship coverage forms are designed to protect contractors from the “your work” claims triggered by project owners and other third parties. This includes the contractor’s workmanship as well as the equipment, parts and materials such as steel beams, epoxy activators and anchor bolts used to perform construction work.
Insureds should be aware that exclusions and strict conditions apply. For instance, faulty workmanship policies typically do not cover resulting bodily injury and property damage and some policies even exclude project delays and other business risks that can arise from the claims of unhappy customers. Another potentially confusing issue is the scope of coverage offered under a ‘faulty work’ endorsement. While some faulty workmanship enhancements are specifically-designed to cover “your work,” claims, others may only cover the products manufactured or fabricated by the insured and not the work they perform or install.
Reprinted courtesy of
Joseph Reynolds, Construction Executive, a publication of Associated Builders and Contractors. All rights reserved.
Read the court decisionRead the full story...Reprinted courtesy of
Mr. Reynolds may be contacted at
joseph.reynolds@rtspecialty.com
Supreme Court of Canada Broadly Interprets Exception to Faulty Workmanship Exclusion
November 10, 2016 —
C. Lily Schurra – Saxe Doernberger & Vita P.C.In a recent policyholder-friendly decision, the Supreme Court of Canada found coverage under an exception to the faulty workmanship exclusion in an all-risk policy. The decision provided the insureds with millions to cover the cost of replacing the faulty work.
Read the court decisionRead the full story...Reprinted courtesy of
C. Lily Schurra, Saxe Doernberger & Vita P.C.Ms. Schurra may be reached at
cls@sdvlaw.com
CGL Insurer’s Duty to Defend Insured During Pre-Suit 558 Process: Maybe?
December 20, 2017 —
David Adelstein - Florida Construction Legal UpdatesIn earlier postings, I discussed the issue of whether Florida Statutes Chapter 558′s pre-suit construction defects process triggers a CGL insurer’s duty to defend. The issue was whether Florida’s 558 pre-suit notice of a construction defect and repair process met the definition of “suit” within a standard CGL policy.
A standard CGL policy defines the term “suit” as:
“Suit” means a civil proceeding in which damages because of “bodily injury,” “property damage” or “personal and advertising injury” to which this insurance applies are alleged. “Suit” includes:
a. An arbitration proceeding in which such damages are claimed and to which the insured must submit or does submit with our consent; or
b. Any other alternative dispute resolution proceeding in which such damages are claimed and to which the insured submits with our consent.
Read the court decisionRead the full story...Reprinted courtesy of
David Adelstein, Florida Construction Legal UpdatesMr. Adelstein may be contacted at
dadelstein@gmail.com
