Nine Firm Members Recognized as Super Lawyers and Rising Stars
July 14, 2016 —
Ahlers & Cressman PLLC BlogAhlers & Cressman PLLC attorneys have again been recognized as “Super Lawyers” and “Rising Stars” (attorneys under 40 years of age, or practicing under 10 years) in Washington for 2016.
Six Ahlers & Cressman attorneys were recognized as Super Lawyers: John P. Ahlers, Paul R. Cressman, Jr., Scott R. Sleight, Bruce A. Cohen, Lawrence S. Glosser, and Brett M. Hill. Additionally, three of the firm’s attorneys have been recognized as Rising Stars: Ryan W. Sternoff, James R. Lynch, and Lindsay K. Taft.
Super Lawyers selects attorneys using a multiphase selection process, involving peer nominations, evaluations, and third-party research. Each attorney candidate is evaluated on 12 indicators of peer recognition and professional achievement. Only five percent of the total lawyers in Washington State are selected for the honor of Super Lawyer, and no more than 2.5 percent are selected for the honor of Rising Star.
Read the court decisionRead the full story...Reprinted courtesy of
10 Safety Tips for General Contractors
October 09, 2018 —
Eric Weisbrot – JW Surety BondsThe construction industry continues to grow each year, paving the way for general contractors to make a profitable, sustainable living when the job is done right. However, to do so effectively, safety standards need to be met with consistency and focus on each worksite. General
contractors who are licensed and bonded must take proactive steps to avoid potentially fatal injuries among their subcontractors and employees, even though this may be easier said than done. To create and maintain a safe worksite each and every time, general contractors should consider how to implement the following best practices and safety tips on the job.
1 – Know the Risks
The most crucial step toward maintaining a safe construction site is to first be aware of the risks involved. Each year, thousands of
construction workers experience injuries on the job, and some ultimately lose their life because of safety missteps at work. As a general contractor, it is your responsibility to know that construction risks run rampant given the nature of the work. Being tuned into the potential for falls, slips, and other common safety-related incidents is a necessary part of operating a safe worksite for you and your employees.
2 – Require Protective Gear
An often overlooked safety precaution on construction sites is the use of up-to-date and well-maintained protective gear. For many subcontractors and employees, it is easy to skip this necessary step in safeguarding themselves from potential safety issues. However, general contractors can take steps to make protective gear a requirement on the job. This may include mandating hardhats and steel-toed shoes, gloves, and eyewear when appropriate. All visitors and workers on a construction site should follow protective gear instructions to avoid unnecessary safety risks.
3 – Educate on Ladder Safety
According to the Bureau of Labor Statistics, ladder injuries account for a significant number of construction worker incidents each year, making up more than 200,000 accidents on average. Ladders have continuously ranked high on OSHA’s list of violations at construction sites because the prevalence of injuries is so high. General contractors can help thwart ladder-related injuries among workers by promoting ladder safety training, including reminders about the right ladder to use for each task. Workers should also be well aware of the importance of inspection before use, and they should always follow the three points of contact rule when going up or down a ladder.
4 – Recognize Equipment Pitfalls
Many construction workers experience injuries relating to equipment used on the job. This could be tied to getting on or off equipment, or loading and unloading materials from machinery. In any case, general contractors can encourage simple tactics to improve equipment safety measures. Paying close attention to secure footing while getting on or off a machine, having more than one person assist with loading and unloading, and ensuring everyone feels comfortable asking for help with these tasks reduces safety risks.
5 – Document Potential Hazards
A general contractor’s main responsibility is to manage the construction site efficiently from start to finish. Part of this duty is recognizing the possible issues on a worksite that may lead to accidents or injuries if not addressed at the beginning of a project. It is necessary to take the time to identify safety risks such as unstable working surfaces, dangerous trenches, or weather-related concerns that may impact the safety of subcontractors, suppliers, or other site visitors. Potential hazards should be documented and shared with site workers, and they should be updated as the project progresses.
6 – Maintain Equipment and Tools
Poorly maintained equipment and tools also cause issues on construction sites. The Infrastructure Health and Safety Association suggests that general contractors
remind workers to inspect tools, machines, handheld equipment, and vehicles before each use to ensure they are properly maintained. Additionally, understanding the maintenance standards for certain tools or equipment and following those guidelines is crucial to reducing injury on the job.
7 – Minimize Crowds
Crowded work areas can be a serious safety issue for general contractors, subcontractors, and vendors and suppliers on site. It is common for crowds to gather during the use of heavy equipment or when a significant task is being completed. However, general contractors should discourage crowd-forming for spectating purposes. This can be done by limiting the number of people allowed to be in an area when certain activities are taking place, and enforcing these rules at every possible opportunity.
8 – Hire Licensed Subcontractors
General contractors may have full- or part-time employees as part of their business model, or there may be a heavy presence of subcontractors not directly tied to the main business. In either case, it is essential to have faith in the capabilities of workers, including their willingness and commitment to follow safety standards. General contractors can help ensure each worker is more likely to take safety seriously when they hire licensed contractors who follow through with
licensing requirements as mandated by the state or city.
9 – Focus on Training
Even after vetting subcontractors and employees based on their licensing status, general contractors also need to ensure training and education are a priority. Several online and in-person courses focus on construction safety training which workers should be encouraged to attend. Safety
education programs from OSHA and other reputable sources are crucial to decreasing accidents on the job.
10 – Be Present
Finally, general contractors can only have an impact on the safety of the job site when they are purposefully present. It is common for some GCs to stop by a project when they are needed or to check on progress periodically. However, new safety hazards, lacking worker training, and other risks are not easily fixed when the general contractor is not consistently on site. Reducing the potential for falls, slips, trips, and fatalities on the job requires communication with workers, and that takes place most effectively when general contractors are in person.
Eric Weisbrot is the Chief Marketing Officer of JW Surety Bonds. With years of experience in the surety industry under several different roles within the company, he is also a contributing author to the surety bond blog.
Read the court decisionRead the full story...Reprinted courtesy of
Not so Fast! How Does Revoking Acceleration of a Note Impact the Statute of Limitations?
July 30, 2018 —
Ben Reeves - Snell & Wilmer Real Estate Litigation BlogIntroduction
Lenders routinely accelerate notes after a default occurs, calling the entire loan due immediately. Less regularly, a lender may change its mind and unilaterally revoke the acceleration. Rarely, however, does a lender fail to foreclose on its real property collateral before the statute of limitations expires. In Andra R. Miller Designs, LLC v. U.S. Bank, N.A., 244 Ariz. 265, 418 P.3d 1038 (Ct. App. 2018), a unique set of facts involving these issues led the Arizona Court of Appeals to hold that proper revocation of acceleration resets the statute of limitations.
The Facts
In Miller, a lender made a $1,940,000 loan evidenced by a promissory note and secured by a deed of trust against a home in Paradise Valley, Arizona. The borrower defaulted in September 2008. The default prompted the lender to notice a default, accelerate the note, and initiate a trustee’s sale of the home in 2009. After the lender accelerated the note, the six year statute of limitations began to run. See A.R.S. § 12-548(A)(1) and A.R.S. § 33-816. Pretty standard facts so far, right? Don’t worry, it gets a bit more convoluted.
Read the court decisionRead the full story...Reprinted courtesy of
Ben Reeves, Snell & WilmerMr. Reeves may be contacted at
breeves@swlaw.com
The Great Fallacy: If Builders Would Just Build It Right There Would Be No Construction Defect Litigation
January 21, 2015 —
David McLain – Colorado Construction LitigationAs the 2015 Colorado legislative session gets into full swing, there is a lot of anticipation and discussion regarding this year’s construction defect reform bill. It seems like every time a reporter broaches this issue in an article, there is a quote from a plaintiffs’ attorney stating that if builders would just build homes right, there would be no need for construction defect litigation. This is the sentiment expressed in the site www.BuildOurHomesRight.com.
The problem with this argument is that it assumes that the “construction defects” for which associations sue are those only that affect the performance of the homes, or are likely to affect the performance of the homes during the useful life of the component at issue. Unfortunately, this is simply not the case. Over the years, the plaintiffs’ bar has stacked the deck, so to speak, making actionable every technical building code violation, regardless of whether it has any impact, or will ever likely have any impact, on the performance of the homes involved.
Read the court decisionRead the full story...Reprinted courtesy of
David M. McLain, Higgins, Hopkins, McLain & Roswell, LLCMr. McLain may be contacted at
mclain@hhmrlaw.com
The Louvre Abu Dhabi’s Mega-Structure Domed Roof Completed
September 24, 2014 —
Beverley BevenFlorez-CDJ STAFFThe final part of the Louvre Abu Dhabi’s 180-metres (almost 600 feet) long domed roof was put into place on Monday, according to Arabian Business. The 12,000 tonne dome is “made up of a steel structure, weighing 7,000 tonnes (almost as much as the Eiffel Tower), and a further 5,000 tonnes of aluminum cladding.”
Carlos Antonio-Wakim, executive director of development at master developers TDIC, stated (as quoted by Arabian Business) that construction was on schedule for the opening of the museum, which is on Saadiyat Island, by the end of next year.
“The concrete works under the dome is all done, so we have all the galleries up and fit-out of those galleries has already begun,” Antonio-Wakim told Arabian Business. “There is also a lot of electromechanical works. A complex project like this requires a lot of mechanical and electrical coordination.”
Read the court decisionRead the full story...Reprinted courtesy of
An Expert’s Qualifications are Important
January 28, 2019 —
David Adelstein - Florida Construction Legal UpdatesAn expert’s qualifications are important. Please remember this the next time you retain an expert to analyze documents or data and render an opinion based on that information. An expert must be qualified to render an opinion. Otherwise the expert will not be allowed to render the opinion you may be looking for or need for purposes of trial, as discussed below.
A recent personal injury case, White v. Ring Power Corp., 43 Fla.L.Weekly D2729a (Fla. 3d 2018), involved a crane operator that became severely injured when operating a leased crane. The case proceeded to trial against only the equipment lessor of the crane based on the plaintiff’s contention that there were deficiencies with the crane. The plaintiff intended on using expert witnesses to interpret the crane’s load movement indicator (referred to as LMI) and render opinions that the LMI data showed prior overloads of the crane which resulted in the injury to the operator of the crane.
Read the court decisionRead the full story...Reprinted courtesy of
David Adelstein, Kirwin NorrisMr. Adelstein may be contacted at
dma@kirwinnorris.com
Georgia Court Rules that Separate Settlements Are Not the End of the Matter
October 14, 2013 —
CDJ STAFFThe Georgia Court of Appeals recently took up the question of how parties in a construction defect settlement relate to one another in terms of apportioning the settlement. Scott Murphy, writing on the Barnes & Thornburg blog clarifies the issues. The underlying construction defect case involved a newly-constructed hotel with mold and mildew problems. The owners sued the contractor (for negligent construction) and the architect (for negligent design). Separately, the owners settled with the contractor for $2.3 million and the architect for $100,000. Subsequently, the contractor sued the architect, attempting to recover part of the settlement the contractors had made with the owners.
At trial, the architect prevailed, obtaining a summary judgment that under Georgia law, “joint-tortfeasors can no longer assert contribution or non-contractual indemnity claims.” This was reversed by the Court of Appeals, determining that the two were not joint tortfeasors. Mr. Murphy notes that “the court rejected the parties’ attempt to disavow joint and several liability in their respective settlement agreements.” The court ruled that the contractor could proceed with their claims against the argument.
Read the court decisionRead the full story...Reprinted courtesy of
Construction Problem Halts Wind Power Park
November 13, 2013 —
CDJ STAFFEngineers have yet to determine why a blade on a wind turbine broke at a wind power plant in Michigan, but as part of their investigation they are halting work on the final 10 turbines. The already completed 60 turbines have been taken out of operation. As a result, the Echo Wind Park is no longer generating power.
Scott Simons, a spokesperson for the project, said “we’re not going to put anyone or anything at risk until we get to the bottom of this.” However, Dennis Buda, the project manager, attributed the broken blade to a manufacturing defect. Construction was planned to end in November.
Read the court decisionRead the full story...Reprinted courtesy of
