Seattle Washington Building Expert Directory

EPA Will Soon Issue the Latest Revision to the Risk Management Program (RMP) Chemical Release Rules

February 10, 2020 — Anthony B. Cavender - Gravel2Gavel
On November 21, 2019, EPA released a pre-publication copy of its Reconsideration of the revised Risk Management Program (RMP) Rules. In an accompanying statement, the agency noted that it has taken steps to “modify and improve” the existing rule to remove burdensome, costly and unnecessary requirements while maintaining appropriate protection (against accidental chemical releases) and ensuring responders have access to all of the necessary safety information. This action was taken in response to EPA’s January 13, 2017 revisions that significantly expanded the chemical release prevention provisions the existing RMP rules in the wake of the disastrous chemical plant explosion in West, Texas. The Reconsideration will take effect upon its publication in the Federal Register. Background As recounted by the D. C. Circuit in its August 2018 decision in the case of Air Alliance Houston, et al. v. EPA, in 1990, the Congress amended the Clean Air Act to force the regulation of hazardous air pollutants (see 42 USC Section 7412). An initial list of these hazardous air pollutants was also published, at Section 7412 (b). Section 112(r) (codified at 42 USC Section 7412 (r)), authorized EPA to develop a regulatory program to prevent or minimize the consequences of a release of a listed chemical from a covered stationary source. EPA was directed to propose and promulgate release prevention, detection, and correction requirements applicable to stationary sources (such as plants) that store or manage these regulated substances in amounts determined to be above regulated threshold quantities. EPA promulgated these rules in 1996 (see 61 FR 31668). The rules, located at 40 CFR Part 68, contain several separate subparts devoted to hazard assessments, prevention programs, emergency response, accidental release prevention, the development and registration of a Risk Management Plan, and making certain information regarding the release publicly available. EPA notes that over 12.000 RMP plans have been filed with the agency. In January 2017, in response to the catastrophe in West, EPA issued substantial amendments to these rules, covering accident prevention (expanding post-accident investigations, more rigorous safety audits, and enhanced safety training), revised emergency response requirements, and enhanced public information disclosure requirements. (See 82 FR 4594 (January 13, 2017).) However, the new administration at EPA, following the submission of several petitions for reconsideration of these revised rules, issued a “Delay Rule” on June 14, 2017, which would have extended the effective date of the January 2107 rules until February 19, 2019. On August 17, 2018, the Delay Rule was rejected and vacated by the D.C. Circuit in the aforementioned Air Alliance case (see 906 F. 3d 1049 (DC Circuit 2018)), which had the effect of making the hotly contested January 2017 RMP revisions immediately effective. Read the court decision
Read the full story...
Reprinted courtesy of Anthony B. Cavender, Pillsbury
Mr. Cavender may be contacted at anthony.cavender@pillsburylaw.com

California Court of Appeal Clarifies Intent of Faulty Workmanship Exclusions

October 26, 2017 — Tiffany Casanova – Saxe Doernberger & Vita, P.C.
Last month, in Global Modular, Inc. v. Kadena Pacific, Inc., 1 a California Court of Appeal clarified the meaning of the frequently asserted j.(5) and j.(6) exclusions of the standard commercial general liability policy; an issue the court deemed one of “first impression” for the state. The court took a close look at how courts nationwide handle the exclusions and relied on the policy language to come to a policyholder-friendly decision. Read the court decision
Read the full story...
Reprinted courtesy of Tiffany Casanova, Saxe Doernberger & Vita, P.C.
Ms. Casanova may be contacted at tlc@sdvlaw.com

Angelo Mozilo Speaks: No Regrets at Countrywide

September 03, 2014 — Max Abelson – Bloomberg
Six years after he lost control of the largest mortgage lender in the U.S., and days after news that the U.S. Attorney’s Office in Los Angeles plans to sue him, the Countrywide Financial Corp. founder is baffled by a new effort to punish him, proud of past triumphs and incensed by criticism. “You’ll have to ask those people, ‘What do you have against Mozilo, what did he do?’” he said in a 30-minute call with Bloomberg News before Labor Day, one of his few interviews since the firm’s downfall. “Countrywide didn’t change. I didn’t change. The world changed.” Interviews with Mozilo, 75, and three friends show what retirement looks like for a chief executive officer linked to the worst financial crisis since the Great Depression. Remaining out of public view like Lehman Brothers Holdings Inc.’s Richard Fuld or Jimmy Cayne of Bear Stearns Cos., Mozilo has submitted plans for Old West-style offices in California, taught students in Italy about finance, invested in a building in the Arizona desert that houses a Taco Bell and written about his life so that his grandchildren will “know the truth.” Read the court decision
Read the full story...
Reprinted courtesy of Max Abelson, Bloomberg
Mr. Abelson may be contacted at mabelson@bloomberg.net

Contractor Beware: Design-Build Firms Must Review Washington’s Licensing Requirements

October 16, 2018 — John Krawczyk - Ahlers Cressman & Sleight PLLC
Design-build contracting is a method of project delivery where the contractor provides both architectural/design and building services to the owner. Yet rarely do firms perform both design and building work in equal measure. Rather, in many instances, firms perform the vast majority of their work on the building side while advertising and providing design services for smaller projects using in-house architects. Regardless of the volume of design-build contracting a firm performs, any firms practicing this method of project delivery must be aware of Washington State’s registration requirement under RCW 18.08.420(1), and specifically the condition that a “designated architect” must serve as a partner, manager or director of the firm’s governing structure. Read the court decision
Read the full story...
Reprinted courtesy of John Krawczyk, Ahlers Cressman & Sleight PLLC
Mr. Krawczyk may be contacted at john.krawczyk@acslawyers.com

Construction Litigation Roundup: “The New Empty Chair.”

June 04, 2024 — Daniel Lund III - Lexology
In a unanimous opinion, the United States Supreme Court ruled that cases in litigation in federal court but which are determined to be governed by the Federal Arbitration Act should be stayed pending arbitration, not dismissed. Traditionally, some federal circuits treated the text of 9 U.S.C. §3 – which speaks in terms of a stay of a matter filed in court but referred to arbitration (“…shall on application of one of the parties stay the trial of the action until such arbitration has been had in accordance with the terms of the agreement…”) – as discretionary, dismissing suits when all of the claims brought in the court were referred to arbitration. In the case, the plaintiffs sued in Arizona state court on labor law violations, and the case was removed to federal court. When the defendant moved to compel arbitration and to dismiss, the plaintiffs “conceded that all of their claims were arbitrable.” Nonetheless, the plaintiffs requested a stay of the case, which the district court refused, dismissing the case without prejudice. Read the court decision
Read the full story...
Reprinted courtesy of Daniel Lund III, Phelps
Mr. Lund may be contacted at daniel.lund@phelps.com

Cost of Materials Holding Back Housing Industry

June 28, 2013 — CDJ STAFF
As home building makes its recovery, there’s another hurdle to overcome: the cost of building materials. The Toledo Blade reports that the rise in the costs of materials makes homes built this year several thousands of dollars more expensive than those built last year. One builder, James Moline, said that he “ended up eating some of the lumber prices on a deal this spring because lumber prices went up so much.” The cost of framing lumber has increased by about two-thirds, while the cost of strand board has more than doubled. Happily, material costs seem to have hit their high and in recent months have started to lower. The rise, according to Robert Denk, a senior economist at the National Association of Home Builders, is due to suppliers cutting back on capacity when demand dwindled, and despite the increase in building starts, suppliers have yet to bring that capacity back. Read the court decision
Read the full story...
Reprinted courtesy of

Agile Project Management in the Construction Industry

January 09, 2023 — Mohammad Saki - AEC Business
The linear workflows used in the construction industry, such as the RIBA plan of work, have a history of starting when the previous phases end. The stages in these workflows are often distinct and sequential, and it might be difficult or expensive to go back after a stage is finished. Design reviews are required in this method, which is also known as the “Waterfall,” and they must be completed before moving on to the next level. Cross-phase iterations are a rare symptom of problems, and the majority of design specifications will be locked early to prevent rework. Additionally, common planning and scheduling methods for the construction industry, like the Critical Path Method (CPM) and Program Evaluation and Review Technique (PERT), lack the ability to represent feedback and iteration in projects because they only permit one-way progression. As a result, these processes have come under fire for being a linear paradigm that encourages a fragmented approach to project management, and the need for a more iterative procedure has increased. Read the court decision
Read the full story...
Reprinted courtesy of Mohammad Saki, AEC Business

Seattle’s Audacious Aquarium Throws Builders Swerves, Curves, Twists and Turns

January 08, 2024 — Nadine M. Post - Engineering News-Record
Patrick Nation describes the reinforcing steel for the main tank of the 50,000-sq-ft Seattle Aquarium Ocean Pavilion as a “monster” job for CMC Rebar. In his mind, it was like bending 496 tons of bars “on a golf ball.” In reality, the operation was more like weaving a giant steel basket. Ironworkers had to painstakingly hand-thread the reinforcing steel for the doubly curved and slanted concrete walls of the 350,000-gallon saltwater exhibit—one bar at a time—to create the dense latticework for the 41-ft-tall basket. Reprinted courtesy of Nadine M. Post, Engineering News-Record Ms. Post may be contacted at postn@enr.com Read the full story... Read the court decision
Read the full story...
Reprinted courtesy of

SEATTLE WASHINGTON BUILDING EXPERT DIRECTORY AND CAPABILITIES