10 Safety Tips for General Contractors
October 09, 2018 —
Eric Weisbrot – JW Surety BondsThe construction industry continues to grow each year, paving the way for general contractors to make a profitable, sustainable living when the job is done right. However, to do so effectively, safety standards need to be met with consistency and focus on each worksite. General
contractors who are licensed and bonded must take proactive steps to avoid potentially fatal injuries among their subcontractors and employees, even though this may be easier said than done. To create and maintain a safe worksite each and every time, general contractors should consider how to implement the following best practices and safety tips on the job.
1 – Know the Risks
The most crucial step toward maintaining a safe construction site is to first be aware of the risks involved. Each year, thousands of
construction workers experience injuries on the job, and some ultimately lose their life because of safety missteps at work. As a general contractor, it is your responsibility to know that construction risks run rampant given the nature of the work. Being tuned into the potential for falls, slips, and other common safety-related incidents is a necessary part of operating a safe worksite for you and your employees.
2 – Require Protective Gear
An often overlooked safety precaution on construction sites is the use of up-to-date and well-maintained protective gear. For many subcontractors and employees, it is easy to skip this necessary step in safeguarding themselves from potential safety issues. However, general contractors can take steps to make protective gear a requirement on the job. This may include mandating hardhats and steel-toed shoes, gloves, and eyewear when appropriate. All visitors and workers on a construction site should follow protective gear instructions to avoid unnecessary safety risks.
3 – Educate on Ladder Safety
According to the Bureau of Labor Statistics, ladder injuries account for a significant number of construction worker incidents each year, making up more than 200,000 accidents on average. Ladders have continuously ranked high on OSHA’s list of violations at construction sites because the prevalence of injuries is so high. General contractors can help thwart ladder-related injuries among workers by promoting ladder safety training, including reminders about the right ladder to use for each task. Workers should also be well aware of the importance of inspection before use, and they should always follow the three points of contact rule when going up or down a ladder.
4 – Recognize Equipment Pitfalls
Many construction workers experience injuries relating to equipment used on the job. This could be tied to getting on or off equipment, or loading and unloading materials from machinery. In any case, general contractors can encourage simple tactics to improve equipment safety measures. Paying close attention to secure footing while getting on or off a machine, having more than one person assist with loading and unloading, and ensuring everyone feels comfortable asking for help with these tasks reduces safety risks.
5 – Document Potential Hazards
A general contractor’s main responsibility is to manage the construction site efficiently from start to finish. Part of this duty is recognizing the possible issues on a worksite that may lead to accidents or injuries if not addressed at the beginning of a project. It is necessary to take the time to identify safety risks such as unstable working surfaces, dangerous trenches, or weather-related concerns that may impact the safety of subcontractors, suppliers, or other site visitors. Potential hazards should be documented and shared with site workers, and they should be updated as the project progresses.
6 – Maintain Equipment and Tools
Poorly maintained equipment and tools also cause issues on construction sites. The Infrastructure Health and Safety Association suggests that general contractors
remind workers to inspect tools, machines, handheld equipment, and vehicles before each use to ensure they are properly maintained. Additionally, understanding the maintenance standards for certain tools or equipment and following those guidelines is crucial to reducing injury on the job.
7 – Minimize Crowds
Crowded work areas can be a serious safety issue for general contractors, subcontractors, and vendors and suppliers on site. It is common for crowds to gather during the use of heavy equipment or when a significant task is being completed. However, general contractors should discourage crowd-forming for spectating purposes. This can be done by limiting the number of people allowed to be in an area when certain activities are taking place, and enforcing these rules at every possible opportunity.
8 – Hire Licensed Subcontractors
General contractors may have full- or part-time employees as part of their business model, or there may be a heavy presence of subcontractors not directly tied to the main business. In either case, it is essential to have faith in the capabilities of workers, including their willingness and commitment to follow safety standards. General contractors can help ensure each worker is more likely to take safety seriously when they hire licensed contractors who follow through with
licensing requirements as mandated by the state or city.
9 – Focus on Training
Even after vetting subcontractors and employees based on their licensing status, general contractors also need to ensure training and education are a priority. Several online and in-person courses focus on construction safety training which workers should be encouraged to attend. Safety
education programs from OSHA and other reputable sources are crucial to decreasing accidents on the job.
10 – Be Present
Finally, general contractors can only have an impact on the safety of the job site when they are purposefully present. It is common for some GCs to stop by a project when they are needed or to check on progress periodically. However, new safety hazards, lacking worker training, and other risks are not easily fixed when the general contractor is not consistently on site. Reducing the potential for falls, slips, trips, and fatalities on the job requires communication with workers, and that takes place most effectively when general contractors are in person.
Eric Weisbrot is the Chief Marketing Officer of JW Surety Bonds. With years of experience in the surety industry under several different roles within the company, he is also a contributing author to the surety bond blog.
Read the court decisionRead the full story...Reprinted courtesy of
National Lobbying Firm Opens Colorado Office, Strengthening Construction Defect Efforts
January 05, 2017 —
Beverley BevenFlorez-CDJ STAFFMichael Best Strategies, a national law and lobbying firm, has recently opened an office in Colorado. According to the Denver Business Journal, the firm “has recruited several big-name associates — a move that could give business leaders even more clout with the Legislature on issues such as construction-defects reform.”
One of the firm’s recruits, Jeff Thormodsgaard, the lead lobbyist in the recent movement to make it harder to sue condominium builders, told the Denver Business Journal, “The only change [in the construction-defects reform effort] is that we’re going to be adding more feet and more boots on the ground and more gravitas.”
Read the court decisionRead the full story...Reprinted courtesy of
Back to Basics: What is a Changes Clause?
July 18, 2018 —
J. Cole Phillips – Smith CurrieThe Changes Clause is one of the most important, perhaps the most important, provision in any construction contract. Project designs are rarely perfect. A Changes Clause provides a mechanism for dealing with such imperfections as well as allowing project owners the flexibility to update a project’s design as the project progresses. A good Changes Clause specifies when an owner can change the original scope of the contract, how the parties should resolve the value of the changed scope and when payment should be made to the contractor or a credit given to the owner. A good Changes Clause will also provide a mechanism for the contractor to notify the owner when it believes a change order is due and specify the time within which such notice must be given. For the contractor, failure to pay attention to the requirements of the Changes Clause can lead to forfeiture of the right to seek an adjustment to the contract value or contract completion date. For an Owner, failure to pay attention to and enforce the requirements of the Changes Clause can result in unnecessary payments to the Contractor.
Read the court decisionRead the full story...Reprinted courtesy of
J. Cole Phillips, Smith CurrieMr. Phillips may be contacted at
jcphillips@smithcurrie.com
Subcontractor Not Estopped from Enforcing Lien Not Listed In Bankruptcy Petition
March 01, 2017 —
Chadd Reynolds – Autry, Hanrahan, Hall & Cook, LLPIn Stock Building Supply, Inc. v. Platte River Insurance Co.,[1] the Court of Appeals dealt with issues of judicial estoppel, bankruptcy, retroactive application of statutory lien amendments, and the full payment defense.
The owner, Madison Retail-Suwanee, LLC (“Madison”) hired Cannon/Estapa General Contractors, Inc. (“Cannon”) to be the general contractor for the construction of a shopping center (“the Project”). Cannon subcontracted with Stock Building Supply (“Stock”) to supply labor, materials, and services for the Project. Cannon failed to complete the project and Madison had yet to pay Cannon the full contract price. In 2007, Stock timely filed a lien on the Project and obtained a judgment against Cannon for the amount due under the subcontract. Platte River Insurance Company (“Platte”), the surety, issued a bond to discharge Stock’s lien. Consequently, Stock pursued an action against Platte to collect the judgment in the amount of $93,865.27.
Read the court decisionRead the full story...Reprinted courtesy of
Chadd Reynolds, Autry, Hanrahan, Hall & Cook, LLPMr. Reynolds may be contacted at
reynolds@ahclaw.com
Virginia Tech Has Its Own Construction Boom
May 10, 2013 —
CDJ STAFFThe last few years has been a tough time for the construction industry, unless you’re in the proximity to the campus of Virginia Tech. Since 1999, the school has seen more than $1 billion in construction projects. Charles Steger, the president of the university says that “we have no intention of slowing down.”
Steger views some of the construction as vital to the school’s mission, noting that at Davidson Hall, which contains chemistry laboratories, “the wiring and other facilities were almost a health hazard.” The building is undergoing a $31 million renovation.
In order to keep the campus walkable, parking lots are being replaced by parking garages. Four dormitory buildings will be demolished and replaced by new facilities. Funds for the development have come from a mix of student fees, donations, research revenues, bond issues, and taxpayer revenues.
Read the court decisionRead the full story...Reprinted courtesy of
No Duty to Defend Under Pollution Policy
February 11, 2014 —
Tred R. Eyerly – Insurance Law HawaiiThe court found there was no duty to defend or indemnify under a pollution policy for claims arising from a building fire. URS Corp. v. Zurich Am Ins. Co., 2014 N.Y. Misc. LEXIS 222 (N.Y. Sup. Ct. Jan. 16, 2014).
Two firemen were killed while fighting a fire at the Deutsch Bank building in New York City. The owner of the building, URS, was sued by the estates of the two deceased firemen and other firemen who were injured by the fire.
URS was an additional insured under a contractors pollution liability policy issued by Hudson Specialty Insurance Company. The policy promised to pay for damages to the insured "if the damages result from a pollution condition." "Pollution condition" was defined as "the discharge, dispersal, release or escape of smoke, vapors, fumes, acids, alkalis, toxic chemicals, [etc.]" The policy explicitly noted that it did not provide commercial general liability coverage. Hudson denied coverage and URS sued.
Read the court decisionRead the full story...Reprinted courtesy of
Tred R. Eyerly, Insurance Law HawaiiMr. Eyerly may be contacted at
te@hawaiilawyer.com
Mississippi Supreme Court Addresses Earth Movement Exclusion
December 09, 2019 —
Anthony Hatzilabrou - Traub LiebermanRecently, the Mississippi Supreme Court held that structural damages to the foundation of an insured’s home came within the earth movement exclusion in a homeowner’s policy, notwithstanding a provision in the policy which provided coverage for water damage resulting “from accidental discharge or overflow of water … from within … [p]lumbing, heating, air condition or household appliance.”
In Mississippi Farm Bureau Cas. Ins. Co. v. Smith, 264 So. 3d 737 (Miss. 2019), the appellee, Smith, filed a lawsuit against her homeowner's insurance company, Mississippi Farm Bureau Casualty Insurance Company (“Farm Bureau”) for its refusal to pay for repairs to the foundation of Smith’s home. Smith alleged that the refusal to pay for repairs amounted to breach of contract and asserted claims for bad faith and tortious breach of contract. In response, Farm Bureau filed a motion for summary judgment on the basis of the policy’s earth-movement exclusion, which provided that Farm Bureau “did not insure for loss caused directly or indirectly by…Earth Movement…[which] means…[a]ny other earth movement including earth sinking, rising or shifting... caused by or resulting from human or animal forces.” Smith filed a cross-motion for partial summary judgment on the basis that the earth-movement exclusion did not preclude coverage because her insurance policy also contained a clause expressly covering water damage.
Read the court decisionRead the full story...Reprinted courtesy of
Anthony Hatzilabrou, Traub LiebermanMr. Hatzilabrou may be contacted at
thatzilabrou@tlsslaw.com
AI in Construction: What Does It Mean for Our Contractors?
December 17, 2024 —
Patrick Scarpati - Construction ExecutiveArtificial intelligence is revolutionizing the construction industry by enhancing efficiency, safety and decision-making throughout the project lifecycle. AI in construction involves the application of advanced technologies like machine learning, computer vision and data analytics to various construction processes. Through AI, machines can learn and imitate human cognitive functions.
The possibilities may sound endless, but as an industry traditionally looking from the outside in at technology, we must first step back to educate ourselves on the basics. This paper is meant to function as a starting point in your journey to understand AI and its potential impact on the construction industry. By reading through definitions, construction use cases and considerations, the reader should walk away with a base level of knowledge to ensure they can actively participate in future conversations on AI in construction.
Reprinted courtesy of
Patrick Scarpati, Construction Executive, a publication of Associated Builders and Contractors. All rights reserved.
Read the court decisionRead the full story...Reprinted courtesy of
